PROVISION OF E/M ALLIED SERVICES, 11 BRD LOGO INFRONT OF MAIN GATE, CONSTRUCTION OF GRANITE PEDESTAL AND ASSOCIATED WORKS NEAR MAIN BUS STAND, RCC PILLAR AND PAVED AREA AT MGR, GEYSER IN CERTAIN SMQS, FOUNTAIN AND ASSOCIATED WORKS, PARKING SHED FOR C

Supply & Fix Underwater light with 720 system lumens, IP68, IK08, Housing Made Up of Hard Chrome plated Stainless steel powder coated with High Purity lenses with glass, Mounting with screws, Must be installed under the water to prevent the light fom burning up because of overheating, External driver, RGBW Light. Cat No: LU04-151-60CCW-XX Make: WIpro, complete all as specified and as directed by Engr-In-Charge.

Supply & fix Isolated, constant voltage type 120 W LED Driver enclosure in Extruded Aluminium metal enclosure. Driver shall be made in India compatible for RGBW luminaires with silicone potted and IP66 Protected of same make as luminaires. Output voltage of te driver 24 v dc. Driver efficiency should be greater than 85% at full load, THD <10 %, PF > 0.95 with Under and Over voltage Cutoff Protection and 440 V withstand for 8 hrs minimum & should have large operating input voltage range of 150 V to 300 V AC (nominal rated voltage-240 V) with 5 KV internal surge protection, Thermal Shutdown protection. Cat No: LG34-120-245AIP66, Make: Wipro complete all as specified and as directed by Engr-In-Charge.

Supply, installaiton, testing and commissioning of IP67 S type 5 Core connector 5C DMX cable/Patch cord Patch Endcap 1m, Cat No: C-5C-S-IP67, Make: Wipro complete all as specified and as directed by Engr-In-Charge.

Supply, installaiton, testing and commissioning of IP67 T type 5 Core connector 5C DMX cable/Patch cord Patch Endcap 1m, Cat No: C-5C-S-IP67, Make: Wipro complete all as specified and as directed by Engr-In-Charge.

Suppy and fix Industrial Protocol/Data Bus cable RS-485, 1 pair 24AWG(7x32) Tinned Copper, PE Insulation, Overall Beldfoil + Tinned Copper Braid (90%) Shield, PVC Outer Jacket, CM Make: BELDEN. complete all as specified and as directed.

Suppy and fix PVC insulated and FR PVC round sheathed, copper conductor (flexible) industrial cable,1100 volt, conforming to IS:694 of size 3 core and 2.5 sq mm with saddle inside flexible conduit complete all as specified and as directed.

Supply and fix in repair Sheet metal enclosure for DB’s SPN, with 200 amps rated bus bar ,4 way ,240 volts double door. Make : Standard/HPL/Legrand.,Complete all as specified & as directed by Engineer-In-Charge.

Supply and fix in repair MCB SP 6 to 32 Amps 240 volts 10 KA C series. MCB with separate short circuit indication type Make Legrand Cat. Nos 811124 Or equivalent in Siemens/L&T, Complete all as specified & as directed by Engineer-In-Charge

Supply and fix in repair MCB SPN 6 to 32 Amps 240 volts 10 KA. Make Legrand Cat. Nos 811151 Or equivalent Make :Siemens/L&T, Complete all as specified & as directed by Engineer-In-Charge

Supply and fixing PVC flexible condite pipe of outer dia 1 inch , water proof having protection with IP 68. complete all as specified and as directed by engr-in-charge.

Supply & Fix Waterproof LED Strip Light with driver 2.5 Watt flexicon LED USB TV RGB strip Make Crompton Cat Pt No LSTGL20-(Blue) (Strip)and LSTDRV-12V-2A (driver)complete all as specified and directed by Engineer- in-charge.

Taking Down Existing logo with all accessories complete all as specified and as directed by Engr-in-Charge.

M & L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 including trapozedial shape of brick work as in drain/ compound wall/ Culver or as per requirement all as specified and as directed by Engr-in- Charge.

M & L for 15mm thick cement plaster in CM 1:4 mixed with water prrofing compound @ 2% by weight of cement to have a smooth finish for laying of water profing membrance. (Note-WPC will be measured separetely)

Supply only integral water proofing compound

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars ,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over and including15 mm cement screed bed in CM 1:6 laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and as directed.

Supply and fix 15 mm toughned glass with 11 BRD logo/design inside the glass Panels, manufactured trough heat treatment to ensure hight srength and safty the glass shall be machine polished on all edges, free from sharpness, bubbles, waves or defects complete all as specified and as directed by Engr-in-Charge . ( Note:- The logo Shall be permanently embedded within the glass.(Not sticker/Paint ), resistant to weathering , UV rays , moisture and chemical action, maintaning clarity and colourfastness trougout its service life. ii) The glass shall be securly fixed into the prep

are grooves / opening of the granite wall using suitable stainless steel clamps, fasteners and structural sealant sdhesive (UV resistance and flexible ) as per Manufactuurer's Specifications. iii) Edges shall be properly sealed with transprent silicon sealant to ensure water and dust proof , all fixiing shall be true too line, level and plumb complete including scaffolding , labour materials , adhesives , tools and tackles,and finishing to the satisfication of Engr-in Charge .

Supply and fixing brass latters 3 to 6mm thick height exc 100mm but not exc 300 mm on granite surfaces including material,Cutting , polishing , and fixing with adhesive /fasterner and finishing complete

Supply and fixing brass latters 3 to 6mm thick height n Exc 100mm on granite surfaces including material,Cutting , polishing , and fixing with adhesive /fasterner and finishing complete

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 30cm deep and getting out soft and loose soil complete all as specified and as directed by Engr-in-Charge.

Excavating over areas, n exc 1.5 m in depth; and getting out in soft /loose soil all as specified and as directed by Engr-in-Charge.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil all as specified and as directed by Engr-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm soft/loose Soil complete all as specified and as directed by Engr-in-Charge.

Removing surplus excavated materials/ debries to distance of exc. 1.5 m bu n. exc. 6 Km m and depositing where directed at a level n. exc. 1.5 m above the starting point. complete all as specified and as directed.

Demolition of brickwork built in cement mortar including all quoins, arches, pillars, but excluding pre-cast concrete articles, Complete all as specified and directed by Engineer-in-charge.

M & L Cement Concrete 1:4:8 type D2 ( using 40 mm graded stone aggregate) as in foundation, Filling on Mass concrete complete all as specified and as directed by Engr-in- Charge.

S&F Mild Steel TMT round bars 10 mm dia and over, cut to length, bent to shape required, including cranking , binding spirally for hooping end and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified.

M&L for form work to sides of concrete foundation, footing, bases of columns, plinth beams and similar work, vertical or to batten rough finish flat surfaces on concrete all as specified.

M&L for form work to sides of Pillars, posts, struts piers, columns etc in squarre, rectangular or polygonal, rough finished surfaces of concrete all as specified.

M&L M-20 using 20mm graded stone aggregate in for columns, pillars, piers, posts and struts etc complete all as specified and as directed by Engr-in charge.

M&L M-20 using 20mm graded stone aggregate in for slabs sopported on walls ,beams and columns in floor s ,roofs, Shelves, Cooking platform and similar work etc complete all as specified and as directed by Engr-in charge.

M&L hardcore of gouge n exc n exc 63mm broken stone or boulder, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface complete all as specified and as directed by Engr-in- Charge

M & L for 75mm thick Cement Concrete 1:4:8 type D2 ( using 40 mm graded stone aggregate) as in sub base of floor complete all as specified and as directed by Engr-in- Charge.

Supply and spreading sand under floors or in foundation including watering and consolidation complete all as specified and as directed by Engr-in - Charge.

M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, with gray pigment cement set, jointed and pointed in neat cement slurry in floors complete all as specified and as directedby Engr-in-Charge ( Make:-M/s Mehtab,M/s NITCO, M/s CEME and any approved Make)

M & L for plain Cement concrete 1:2:4 type B0 ( using 12.5mm graded aggregate )as in coping , bed block and surface channel of drain all as specified and as directed by Engr-in- Charge.

M&L for rolled sections as in main trusses or cross beams, rafters, purlins of specifed angular/tubular section, beams or channel sections with flange plates caps, bases, cleats and other connections Fe-410 W (Gde E-250) quality B.

M & L for preparation for new or previously umtreated steel surfaces of any description, over 10cm in width or girth,not otherwise described for two coats of synthetic enamelled paint over a coat of red oxide or zinc chrome primer on steel surfaces etc, complete all as specified and as directed."

Supplying and laying of 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down steel tubing of 15 mm dia bore and connections from walls and cellings or laid in floor complete all as specified and as directed by Engr-in- charge. Note : The rate includes for chase cutting of Concealed for all the pipes shall be got tested before providing by Pressure testing machine and got approved and any leakage seepage observed , the conctractor shall be redo the same without any extra payment.

S&F in Repair Cast copper alloy CP angle valve type stop cock with flange suitable for 15mm bore pipe screwed at both ends or high pressure with Capstan head confirming to Prayag /Saiko/ Parko Complete all as specified and as directed by Engineer-In-Charge.

S&F in Repair bib tap long body foam flow with flange of bore size 15mm, cast copper alloy, chromium plated, fancy type, with crutch or butter fly handle screwed down , screwed for iron pipe or for brass ferrule of Prayag /Saiko/ Parko Complete all as specified and as directed by Engineer-In-Charge.

S&F in Repair PVC connection 15mm size with PTMT nuts, of length 600mm for jhot and cold water Complete all as specified and as directed by Engineer-In-Charge.

Supply, installation, testing and commissioning of storage type electric water heater of capacity 25 Ltrs, AC 240 Vot, 50 Hz. 5 star rating, verticle type duly fixed to existing wall where directed including suitable mounting bolts, nuts and washer duly grouted including necessary accessories such as safety valve, thermostat, NRV, inlet/ outlet water connection piece etc including writing MES No on geyser with white synthetic enameled paint complete all as specified and as directed Note: (i) Cutting and making good of chases in the wall/roof/floor is deemed to be included in the quoted rates (The wiring for geyser shall be independent from main DB of individual quarter to geyser power socket is deemed to be included in the quoted rates.

M&L for Point wiring with 1.5 Sqmm (nominal area) PVC ( FRLS) insulated sheathed copper stranded conductor cable run in and including surface in wall/celling/floor in PVC casing caping as per IS with all fittings such as bends, tee,junction boxes,etc of suitable size including 1.5 Sqmm PVC(FRLS) insulated copper earth continuity conductor connected to common earth dolly and including PVC boxes with modular inner & surface plate suitable for housing modular switches, sockets,fan regulators etc for one light/fan/call bell point controlled by one 1- way switch complete all as specified and as directed by Engr-in-Charge.

Supply and fix in repair PVC Box with Switch socket combination outlet 5 pin 5 Amps 2 in 1 flush type Make : Anchor/Havells Rio.,Complete all as specified & as directed by Engineer-In-Charge.

Supply & Fix GI water tubing medium grade with all fitttings and fixed to wall, floor, ceiling for bore of 40 mm diameter, complete all as specified and as directed by Engineer-In-Charge.

All as per item above but of bore 25 mm dia

Point

Material & Labour for laying MS ERW pipe in repair of 40 mm dia medium grade (C Class) in trench/surface including necessary cutting,welding/fabrication work & including suitable size SS304 Nut bolts to connect MS flanges as per IS-1239, complete all as specifi

ed and as directed by Engineer In Charge.

Supply & Fix in replacement of Bronze gate valve (Hex type) ISI marked screwed both ends of 40 mm diameter Art No 1006 of Make: Zoloto or Equivalent in Leader/L&T complete all as specified and as directed by Engineer-In-Charge.

Supply & Fix in replacement of Bronze gate valve (Hex type) ISI marked screwed both ends of 25 mm diameter Art No 1006 of Make: Zoloto or Equivalent in Leader/L&T complete all as specified and as directed by Engineer-In-Charge.

Supply & Fix 2 pole open well submersible pump of 3 Hp model no KOS-318, Pipe size (Suction 65 mm , delivery 50 mm) , Discharge ranges (12.6 to 4.8) Liter per sec, Head ranges (20 to 8 ) m, operating volateg ranges from (380-415)V and other connected Item suitable for fountain complete all as specified and as directed by Engineer-In-Charge.

Supply & Fix DoL Starter of 3 HP and other connected Item suitable for fountain submersible motor, with operating voltage renges from (380-415) V having backup protection with HRC Fuse type GII /GL of 16 Amps enclosed in SS enclosure. complete all as specified and as directed by Engineer-In-Charge.

Supply & Fix brass 15 mm Nozzle threaded with MS pipe including nipple and socket after drilling, welding to MS pipe complete all as specified and as directed by Engineer-In-Charge.

Supply and mild steel plates chequerred channels, square cut or notched ( ordinary and counter sunk) forming holes without any attachment of steel Fe - 410W ( Gde-E-250) quality - B as in florring and is supproting members of required size and section duly cutting and welding with foundation etc all as directed by Engineer - in - charge.

Excavating in post holes (or similar holes) each n exc 0.5cm getting out in hard dense soil returning filling in and ramming earth broken rubble mixed with earth around in layers not exceeding 25Cm.

M & L for type B2 1:2:4 (40mm graded stone aggregate) cement concrete in foundation, filling and mass concrete.

S & F for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Map as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S & F for steel work in tubular trusses including special shaped washer etc. Complete using ERW or induction but welded tubes conforming to I S 1161-1979 grade ST-240

S & F Mild steel bolts dia n exc 12mm purpose made with hexagonal or square head one ned and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square not exc 30cm long

Cutting chase painning in making godd to facings where required and pointing in cement morter 1:3 to ends or edges of landings steps cils sunshades, shelves, lintels etc and cutting chases for concealed water tubing or concealed condut wiring tec and making good cutting exceeding 20cm girth

Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each but with shutters (without taking off shutters from the frame) compete all as specified as directed by Engineer -in -charge Note :- Rate including forming Jambs

Demolition of cement concrete of any description and in any position complete all as specified and as directed.

Dismantling Fulshing Cistern along with Pipe (Inlet and Outlet) of any Capacity as specified and directed by Engineer in Charge

Taking up or down steel tubing 15mm and connections, including cleaning for re fixing or removal to store

M&L Brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1: 4 as in Manholes/ similar work including pointing flush the external face of the brick work as the work proceeds all as specified and directed by Engr-in-Charge

M&L for 15 mm thick cement plaster in CM 1:4 on brick surface finished even and smooth without using extra cement including 2% Water Proofing Compound as per weight of cement, Complete all as specified and directed by Engineer-in-charge.

Taking down Chowkhats or frames n exc 1.5 sq. m each but with shutters (without taking off shutters from the frame) compete all as specified as directed by Engineer -in -charge Note :- Rate including forming Jambs

M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including moulding and pointing in white cement (1:2) using marble dust with admix ture of pigment to match with shade of granite

M & L for anodized aluminium sliding window with anodized aluminium frame of size 92 mm x 32 mm x1.60 mm thick) of 3 Track with 1.6mm thick, with sliding shutters with necessary channels (top rail, bottom rail and style of size 40mmx 18mm x1.6 mm thick) including glazing with tinted sheet glass panel 4.00mm thick, fitted with necessary jointing cleats, glazing clips,locking device one for each shutter , rubber packing, aluminium beading, screws etc, complete.compete all as specified as directed by Engineer -in -charge

M&L for 35mm Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush/skeleton door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and Supply & fixing with stainless steel butt hinges(3nos/door), 1SS Handle, 1 SS Door stopper of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge.

M&L Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).

M & L for 25 mm thick Cement Concrete type B 1 (1:2:4) using 20 mm graded stone aggregate as in sub bases, sub floors . Complete all as specified and as directed by Engineer-In-Charge

M&L dark shade double charged Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 Sqm but not exceeding 0.42 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed of 1:6 cm complete all as specified and directed.

Ditto as above but as Skirting

S&F Glass Wool acoustic suspended modular ceiling system with tegular bevelled edges having 15-20mm thickness or more, visible surface of each tile is 7mm below the grid, visible surface is batch painting glass tissue in white , back of the tile covered with glass tissue. Tile should have relative humidity (RH) >95% NRC upto 0.9, Light reflectance > 85%, fire safety standard tested and classified as non combustible according to EN ISO 1182 with reaction to fire classification class A2S1DO according to EN 13501-1-Europen standards. mo

dule size of tile shall be 600 x 600 x 15 to 20mm with recycle content > 43%. The tile shall be laid on GI grid with 15mm "bolt slot" under T section flanges of white colour rotary stitching on all T section (All shilloute grids) i.e. the main runner 1200mm and cross Tees of 600mm with web height of 35 to 38mm and load carrying capacity 14Kgs/m^s , minimum pull out strength of 100Kgs. The T sections shall have a galvanising bof 120 gms per Sqm and need to be installed with suspension system as required on site of any shape and size. Make - Knauff ceiling solution / Saint Gobain / Equivalent

M&L for 2 coat of 1.5 mm thick Birla Wall care putty on walls surfaces complete all as specified and as directed.by Engr in charge.

Complete Removal of existing treatment and applying two coat of Oil bound distemper over a coat of primer after smoothing of surfaces complete of wall and ceiling all as specified and as directed by Engineer in charge

Preparation of new surfaces by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and greasy spots, removing nails etc., and applying two coat of distemper oil emulsion over a coat of primer white or tinted on walls including cornices etc.complete all as as specified and as directed by Engineer in charge

M&L for preparation of old/ untreated plastered surfaces of walls/ceiling/chajja and applying two coats of weather proof exterior emulsion paint over and including a coat of priming coat of exterior cement base primer as per manufacturer's instruction complete all as specified and directed. Note : (i) The paining shall be done with fully automatic airless spray machine with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI, by allowing 6-8 hrs to dry the surface for painting of subsequent coats of paint. (ii) Rate quoted shall be deemed to be included for scaffolding up to 15 mtr height building.