Making and erection of 01 no. of watch tower at Diesel dispensing unit under AADOCM, Dhori Area

Amount

Cutting work

Welding work

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost ofpurlins, rafters and trusses and including cutting to size and shape wherever required.

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30cm in depth 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m disposed earth to be leveled and neatly dressed : Ordinary rock.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 40mm nominal size).

Holding bolt 32mm x 1 mtr. long.

Erection cost of tower by manually in correct direction including O/H expenses & profit.

O/H expenses & profit.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required: Group A

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. : 3 pin 5/6 amps socket outlet.

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size in phenolic laminated sheet cover in front including painting etc required. : 150 mm x 75 mm x 60 mm deep.

Supplying and drawing following sizes FRLS PVC insulated copper conductor, single core cable in existing surface/ recessed steel/ PVC conduit as required. : 3 x 2.5 sq.mm

Applying priming coat : With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanized iron/steel works (+) With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanized iron/steel works (second coat).

Painting with aluminium paint of approved brand and manufacture to give an even shade : Two or more coats on new work.

Providing and fixing of wall fan 400mm.

Supplying and fixing 3 pin, 5 amps ceiling rose on the existing junction box/ wooden block including connection etc. as required.

Total impact of GST for the purpose of CTC

M/S UNIVERSAL TRADERS (BID ID -1098725)