PROVN OF ANTE ROOM FOR CANDIDATES AND PROVN OF MAIN GATE AT SCN UNDER GE (WEST) JRC

Amount

Surface dressing n exc 15 cm deep getting out in Soft / loose soil complete all as specified and as directed.

Excavating in trenches and laying for cable n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil as specified and directed

All as per item above but for each additional 1.5m or part thereof in depth beyond the first 1.5 m

M&L for Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in old size brick in Cement Mortar 1:6 as specified and directed

M& L brick work in cement mortar 1:4, using sub class 'B' bricks straight of curved on plan exc 6m mean radius, all as directed

M& L half brick work , using sub class 'B' bricks straight of curved on plan any radius in cement mortar 1:4, all as directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. as specified and directed

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point as specified and directed

Material and labour for brocken bricks Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L cement concrete 1:4:8 type D2, using 40mm graded aggregate in foundations, filling mass concrete, all as directed

M&L cement concrete 1:2:4 type B2, using 40m graded aggregate in floor finishes, post holes concrete, all as directed

M & L for rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished fair and even without using extra cement including water proofing compound complete all as specified and as directed by Engineer-in-charge

M&L for preparation of newly plastered surface and Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) all as specified and directed by Engineer-in-charge

M & L for rendering 15 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished fair and even without using extra cement including water proofing compound complete all as specified and as directed by Engineer-in-charge

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing and as directed by Engineer-in-charge

S&F PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet but single side prelam PVC sheet used instead of plai colour sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and as directed by Engineer-in-charge

M&L for Mild steel TMT bars 10 mm dia and over cut to length , bent to shape required, including cranking bending and binding with annealed wire not less than 0.9 mm dia complete.

M&L for Mild steel TMT bars 6mm to 8mm dia and over cut to length , bent to shape required, including cranking bending and binding with annealed wire not less than 0.9 mm dia complete.

M&L RCC M-25 grade(20 mm aggregates) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed

S&F formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.

M&L RCC M-25 grade using 20 mm graded stone aggregate as in Columns, pillars, piers, posts and struts (Square/Rectangular)

Formwork to sides of pillars, posts, struts, piers, columns and stanchions

M&L for RCC M-25 grade (20mm aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter

M&L RCC M-25 grade using 20 mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed

M&L for RCC Type B0 1:2:4 (12.5mm graded aggregate) in Chajjas complete all as specified and as directed

M&L RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in precast RCC manhole / septic tanks ,drain,covers including all form work and setting in CM 1:4 all as specified

M&L applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces

S&F APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified

Supply only integral water proofing compound (ISI marked) complete all as specified and directed.

M & L 40 mm th. Brick tiles laid on bedding layer of CM 1;6 15mm thick and joints grouted flush in cement mortar 1:3mixed with 5% of crude oil by weight of cement over APP membrane

M & L flush pointing in CM 1:3 to brick tiles laid flat in roof or paving incuding raking out joints complete all as specified and directed.

M&L for 75 mm thick cement concrete (1:3:6) type C-2, using 40mm graded crushed stone aggregate as in plinth protection, surfaces finished even and fair without using extra cement complete all as specified and as directed.

M&L for vitrified ceramic, Light shade tiles 10 mm thick (square/rectangular) polished, area of each tile exc 0.42 and not exceeding 1.00 Sqm; as in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match with colour of the tiles over and including screed bed of 15 thick cement mortar (1:6) complete all as specified and as directed.

M&L for vitrified ceramic, light shade tiles 10 mm thick (square/rectangular) polished, area of each tile exc 0.42 and not exceeding 1.00 Sqm; as in skirtings etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match with colour of the tiles as in skriting over and including rendering 10 thick cement mortar (1:4) complete all as specified and as directed.

S & F 110 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints jointing with adhesive fixed in repair to wall/laid in trenches complete all as specified and directed.

110 mm bore PVC (SWR) bends in any radius complete all as specified and directed.

M&L for 40 mm thick Damp proof course in Cement Concrete 1:2:4 type B0 in horizontal/vertical surfaces including necessary formwork and applying evenly a coat of blown type bitumen @ 1.5 kg/Sqm and blinding with clean dry sand @ 0.05 cum /sqm

M&L cement concrete 1:4:8 type D2, using 40m graded aggregate in foundations, filling mass concrete, all as directed

M&L sand cushioning to under concrete interlocking paver block including watering & consolidation complete all as specified and directed

M&L 80mm thick machine pressed precast concrete interlocking paver block and shape and size confirming to IS 15658-2006 of M-40 Grade with grade cement and pigment complete all as specified and directed.

M/L PCC 1:2:4 type B1, using 20mm graded stone aggregate as in benching, haunching,bed blocks and in copings, all as directed.

Supply and fixing powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified complete all as specified

S&F powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

Material and labour for 5.5mm thick sheet glass ordinary quality including solar control film 25 micron reflective type sticked on glass pane as per instructions of manufacturer and glazing fixed with oil putty in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

Provoding and fixing false ceiling at all heights with GRG (Glass Fibre reinforced Gypsum) False ceiling tiles of size 595 x 592 mm opf approved texture , esign and patterns having moisture content less than 2% , humidity resistance of 99% NRC 0.50 to 0.75 as per IS 8225: 1987 , Non combustible as per BS-476 part-4-1970 and light reflectance of 85% (Min) to be laid in true horizontal level suspended on inter-locking metal T- grid of hot dipped galvanised iron section of 0.33mm thick comprising of main T- runner of size 15 x 32 mm of length 3000mm , Cross T- of size 15 x 32 mm of length 200 mm and secondary intermediate T- section of size 15 x 32 mm of length 600mm to 50 mm long , 8 mm outer diameter M-6 dash thru fasteners , 6,mm dia fully threaded hanger rod upto 1000mm length and L-shape leveladjuster of size 85 x 25 x 2mm . Galvanised iron perimeter wall angle of size 24 x 24x x 0.40 mm of length 3000mm to be fixed on periphery of wall with plastic rawl plugs and screws at 450 mm centre to centre and 40mm log screws. The work shall be carried out as per specs and drawings and instrs of EIC with semi-perforated 12mm thick micro tegular edged GRG false ceiling tiles.

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including pointing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite including Screed bed or bedding layer of mortar 15 mm thick all as specified and as directed

Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles all as spd and directed

Demolition of RCC of any description and in any position as specified and directed.

All as per item above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

S&F Framed work( using Fe 410-W Gde-250 quality-A) as in architectural doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete as per drawing all as specified and directed by Engr-in-charge

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, as directed.

S&F Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, conforming to Fe 410 -W (Gde E- 250) quality A complete

M&L pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa with powder coating 150 gm/sqm as in roof covering/ cladding to wall , fixed with self tapping screws/ J or L type hook bolts complete as directed by Engr-in-charge.

M&L for prepration of new steel surfaces of any description not otherwise described over 10 cm width or grith and applying two coat of synthetic enamel paint over one coat of primer complete all as specified and directed by Engr -in-charge.

Excavating in post holes (or similar holes) in soft/loose soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm all as specified and as directed by Engr-in-charge

M & L for concealed point wiring complete with 2.5 sqmm single core multistranded copper conductor FRLS, PVC insulated and unsheathed cable 650 /1100 volts grade drawn through & including PVC conduit ,medium grade with accessories like bends, tees, junction boxes etc fix on wall or ceiling surfaces all as specified including 2.5 sqmm , FRLS type , copper multistranded cable as earth wire including pressed steel sunken boxes for mounting of switch/sockets and regulator and including cover plate white colour all as specified and directed

supply and fixing piano /flush typer switch 1 way 16A,

supply and fixing piano /flush type socket 1 way 16 amp

M & L for concealed point wiring complete with 1.5 sqmm single core multistranded copper conductor FRLS, PVC insulated and unsheathed cable 650 /1100 volts grade drawn through & including PVC conduit ,medium grade with accessories like bends, tees, junction boxes etc fix on wall or ceiling surfaces all as specified including 1.5 sqmm , FRLS type , copper multistranded cable as earth wire including switch/sockets and regulator and including cover plate white colour all as specified and directed for: One 3 pin socket outlet, 5Amps, independent with other switch

one 3 pin socket outlet 5 amps on same board with other switches.

One light /fan/cell bell point controlled by one one way switch as directed engineer-in-charge

Supply and fixing piano /flush type switch 1 way 6A

Supply and fixing piano /flush type socket outlet one way 6 Amp

Supply, installation & commissioning MCB Load Distribution board VTPN 4 way double door, for mounting MCCB/DP/ SP/TP/ MCBs as Incoming / outgoing, factory made, confirming to IS, fabricated out of CRCA sheet , fitted with DIN channel, neutral link and suitable rated bus bar, DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and backed at high temperature, between powder paint process the sheet steel having to go through the anti rust conditioning in not less than seven tank process to ensure smooth finish and protection against corrosion atmosphere. The DBs shall be double door type with hinged door with locking arrangement. The DP/SP/TP MCB shall be of same make as DB. DB shall also be provided with label marking indicating the incoming and outgoing circuits on all way as specified. The DBs shall be of IP 43 - IK 09 with metal door complete all as specified and directed at site .

Supply and Fix 4 Pole MCCB adjustable type 100 Amp, 50 Hz, 415 V with rupturing capacity 36 KA.

Supply and fixing sheet metal enclosures for DB's SPN when MCBs to be used 8 way double door

S/F MCB SPN 40 to 63 Amps rating 240 volts ,10KA 'c' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB complete with connection testing and commisioning

M & L for sub main wiring with two core PVC insulated and unsheathed cable 6 sqmm with multi stranded copper conductor , FRLS type cable drawn through and including PVC concealed conduit of suitable size complete with all accessories alongwith provn of 2 run of 6 sqmm PVC insulated and unsheathed ,multi stranded copper conductor , FRLS type cable as earth wire. (Six runs of cable and one run of conduit shall be measured as one length)

Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of cap 20 amp complete all as directed and specified.

M & L ceiling rose surface bakelite 65 x 50 mm three terminals complete all as specified.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers

supply and fixing M & L Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings

S&F LED tube light fitting 20W (Double side) including LED lamp 20W with 2100 lumen output with internal surge protection device of 4KV with voltage band of 140-280V CRI-6500K (White light) fixtures box type and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.50mm 3 core complete all as specified and directed.

Supply and fixing PVC wall mounted fans copper wound complete with blades, down rods, electronic regulator and accessories, 230 V, 450 mm sweep. Min air delivery 210 CFM with service value

supply and fixing recess /ceiling mounting LED light 1x36 watt cool white light of 6500k complete all as specified and directed.

supply and fixing S/F MCB SP 6-32 Amps 240 volts

supply and fixing PVC insulated armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sq. mm 4 core

M & L river sand in trenches as cable cushioning 8 cm below the cables and 15cm above the cable which is to be punned down to 10m all as specified and directed.only punned thickness will be measured.

Supply and lay burnt bricks sub class 'B' standard size laid across the cable in trenches as protection to the cable all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermalmanagement in multiple optics complete withIP 65/66 protection complete

S&F wall light CUP A007 Menorah 1LS E27 MATT GLD Item Code:LHFHBDDNTB1D007, Lamp base: E27

Earthing complete with galvanised steel earth plate electrode 60cm×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion

Supply and fixing amp rating 240V, 10KA 'C' miniature circuit breaker (MCB) SPN 32 AMP of following polesand current carrying capacity in the MCB DB complete with connection testing andcommissioning. SPN 32 Amps

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermalmanagement in multiple optics complete withIP 65/66 protection complete

supply laying and testing cable XLPE insulated ,screened,pvc bedded, galvanized steel strip or wire armoured, electric power cable (heavy duty) cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sq. mm 2 core

J.S. Constructions

M/S Kuldip Construction Co.

S S CONSTRUCTION

PAUL CONSTRUCTION CO.

SARASWATI CONSTRUCTION CO