GE 874/EWS-58/2023-24

Amount

BR and EM Portion

Demoliton of reinforced Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complrete all as specified and directed.

M&L TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

M&L RCC 1:2:4 type B1 using (20 mm graded aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete work in water retaining structures complete all as specified and directed.

Taking down plastering on lathing (other than wire-netting), without removing lathing, in cement mortar (one side only measured in cases where both sides are plastered)

M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 complete all as specified and directed.

M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4, including 5 mm thick setting coat, trowelled to even and smooth finish, including top layer mix with water proffing compound, complete all as specified and directed Note : WPC will be paind seprately.

Supply only Integral waterproofing compound for mixing with Cement plaster complete all as specified as per manufufacture instruction and all as directed by Engineer-in-Charge.

Dismantling brick work or stone masonry built in cement mortar.

M&L brick work with sub class 'B' bricks of old size, straight or curved on plan exc 6 m mean radius built in cement mortar 1:4.

M & L applying two coats of cement based paint on newly plastered or unplastered wall surface including preparation of surfaces, complete all as specified.

Excavation in trenches not exc.1.5 mtr wide and not exc.1.5 m in depth for laying of pipes as in hard soil and getting out, complete all as specified and directed.

Returning, filling, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in any type of soil, complete all as specified and directed.

Removal of excavated material to a distance not exc.50 m and depositing where directed at a level not exceeding 1.5 mtr above starting point.

S&F GI water tubing 20mm bore 'medium grade', galvanized, with all fittings like socket, union, elbow, bend, tees etc jointed and laid in trenches Fixed in repair complete all as specified and as directed by Engr-in-Charge.

All as per item above but 25mm bore.

All as per item above but 40mm bore.

All as per item above but 50mm bore.

All as per item above but 80mm bore.

All as per item above but 100mm bore.

S&F gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of bore of 20mm Fixed in repair complete all as specified and directed by Engr-in-Charge.

All as per item above but 25mm.

All as per item above but 40mm.

All as per item above but 50mm.

All as per item above but 100mm.

Lagging to pipes used in internal water supply or plumbing all round with, 40min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 for 40 mm dia pipeline complete all as specified and directed.

Lagging to pipes used in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 for 25 mm dia pipeline complete all as specified and directed.

Lagging to pipes used in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 for 20 mm dia pipeline complete all as specified and directed.

Supply and Fixing in replacement CI Non return valve of size 80mm bore without bypass arrangement swing type confirming toIS 5312 flanged end pressure rating PN 1.6 complete all as specified and directed.

Supply and Fixing in replacement CI Non return valve of size 100mm bore without bypass arrangement swing type confirming to IS 5312-1 flanged end, pressure rating PN 1.6 complete all as specified and directed.

Cutting of Existing DI/CI/GI steel tubing (of any size) for alteration or addition and insertion of Tee 100x100x50mm or 100x100x80mm, union, socket all as specified and directed.

Excavation in post holes each n. exc .50 cum, getting out in soft/loose soil and removing surplus material n. exc 50 mtr and making good disturb surfaces all as specified.

M& L PCC 1:3:6 type C-2 as in foundayion filling of posts and struts.

M & L 10 mm dia MS round bar for fixing of chain link fencing with post.

M & L for Mild Steel flat iron 40x6mm for fixing chain link fencing with RCC post and MS rounnd bar 10 mm dia for inserting in mesh including hooking etc complete.

S & F 10mm dia 40mm long MS screw bolt machine made with hexagonal or Square head at one end and screwed the other,screwed end fixed with washer complete.

S & F Mild Steel Galvinised, 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails including securing or tying with and provision of galvinised MS wire staples or steel pins etc

Supply only chain link fencing, galvinised mild steel of mesh 100x100mm size,10 gauge complete all as specified.

Fixing only chain link fencing, including line wires 100x100 mesh, 10 gauge galvinised mild steel to any type of standards, rails, straining bolts, etc. complete

M&L two coats of synthetic enamel paint over redoxide over 10 cm width/girth on steel surface including preparation of surface complete all as specified.

M&L two coats of synthetic enamel paint over a coat of redoxide primer n.exc 10 cm width/girth on steel surface incl preparation of surface complete all as specified.

S & F Mild Steel ISA 65 x 65 x 8 mm as in posts and struts in fencing including cutting tops to shape as directed, drilling holes notching for wire etc conforming to Fe 410 or Fe 310.

M & L two coats of black bituminous paint on new steel complete all as specified.

S & F Mild Steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed

Supply, laying and testing and fixing cable 1100 volts grade XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volt grade cross sectional area 25 sqmm 2 core. Meke- Havells/Polycab/Globster

M & L for PCC 1:4:8 type D-2 ( Using 40 mm graded aggregate as in bed of poles streets, stays assembly , foundation , filling and mass concrete as complete all as specified and directed.

M & L for cement concrete 1:2:4 type B-2 using 40mm Graded crushed stone aggregate as in pole coping and stay Assembly all as specified and directed by Engr-in-Charge

Supply and fixing of steel tubular poles erected truly vertical or planted as strut complete with 300x300x6mm thick mild steel base plate welded to pole B-118 final taper cap, bolts, nuts & screw pole made out of ERW MS tubing conforming to IS2713 part-11 type 410 SP -55 (9.00 mtr long) including drilling of holes of reqd size for fixing of cross arms painting the exposed surfaces of pole with two coat of red oxide zinc chrome primer and with black & bitumenous paint externally for portition embeded in concrete , making fine black and yellow bands at lower portion of the poles each 300mm wide alternately and making pole no. with black plaint with suitable height complete all as specified and directed

Supply and fixing LED flood Light 120W 230V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection , with impact and corroson resistant complete with driver and lamp including all fittings & acessories used to Fix light on poles. Make - Havells/Phillips

Supply and fixing hot press moulded SMC boxes with 200 Amps rating bus bar and distribution board Make:- sintex Product code GS -JB 2014 and single core PVC FRLS copper conductor 1.5 Sqmm in PVC pipe 20mm dia for connection from junction box to street light complete , including MS clamps fabricated from 25 x 3mm MS flat iron nuts , bolts etc for mounting all as specified and directed including 1 Nos of 6 amp SPN MCB. Note : MCB's clamps , nut, bolt, & GI pipe etc. required will be measured and paid under relevant items

MOHAMMAD YOUSUF MIR

Bidder Name

MOHAMMAD YOUSUF MIR

m/s mohd saleem and co