REPAIR MAINT OF DISTRIBUTION BOARDS INTERNAL ELECTRIC FITTINGS AND CONNECTED ITEMS OF CEILING FAN EXHAUST FAN WALL FANS GEYSERS AND ALLIED WORKS IN OTM AND MD ACCN AT SAHARANPUR UNDER GE ROORKEE

Amount

Taking down sub main wiring and supply and fixing of Sub main wiring with two runs of single core PVC insulated and unsheathed multistranded, copper conductor (FRLS) cable of size 4.0 sqmm LT, 1100V grade, down trhough and incl adequate sizes PVC non metallic conduit of 20mm/approprite dia with accessories and fittings and one run of 4 sq mm single core multi stranded copper conductor cable as earth continuity conductor. Two runs of cable one run of earth wire and one run of PVC non metallic conduit of 20mm/approprite dia shall be measured as one run length, Cable required for connection to DBs shall deemed to be incl and shall not be measured separately. Earth wire shall run inside the conduit pipe (Note :- Extra length of cable required for connection to MCBs shall deemed to be included in unit rate.) Make of Cable- Grandlay/Havells /polycab, Make of PVC conduit - Kalinga/AKG/Polycab

S&F in replacement switch piano flush type polycarbonate single pole one way 5 Amps.

S&F in replacement switch piano flush type polycarbonate single pole one way 15 Amps.

S&F in replacement socket outlet polycarbonate 2 in 1, 3 pin 5 Amps flush type.

S&F in replacement socket outlet polycarbonate 2 in 1, 3 pin 5/15 Amps flush type.

S&F in replacement bell push flush type 5 Amps

S&F in replacement Ceiling rose 3 phase/PVC/polycarbonate, insulated body.

S&F in replacement steped type electrronic fan regulator flush type all as specified.

S&F in replacement Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings with 9 watt LED bulb PAG series B-22 base complete all as specified and directed. Bulb Make : Havells, Cat part No. LHLDEUEBML8R009 or equivalent in Syska/Crompton/Phillips, Holder Make : Cona/Anchor/Havells

S&F in replacement electric bell ding dong single phase, AC 230 volts complete all as specified, Make :Cona/Anchor or equivalent

Supply and fixing in repair Wall light fixture lantern made up of polycarbonate suitable for 9 watt LED bulb complete with 9 watt LED bulb including connection with all necessary accessories complete all as specified and directed by Engr-In-Charge. Make:- Havells Cat No.FLORETINE WL ILS B22 SS PPCP or equivalant Philips/crompton/C&S.

Supply and fixing decorate gatelight globe (round size) made up of high grade unbreakable polycarboneate material suitable for retrofit LED lamp B22 base : Havelles Cat No. MOON (OPAL) LHFXBON1TN5Q008 or equivalent in Phillips/Cromption/C&S

S&F LED Tube light fitting 1x18/20 Watt surface and wall mounted LED batten, extruded aluminium housing with polycarbonate diffuser & integrated electronic driver complete with all accessories internally prewired and incl connecting up three core single wire complete all as spd and directed . Make : SYSKA, SSK-RA1801, Havells/Phillips/Crompton/Bajaj or equivalent

S&F double door MCB distribution boards sheet steel, powder coated DBs suitable for MCBs fitted with bus bar, neutral link earth bar and din rail Single phase and neutral confirms to IS : 13032-1991DB, 240 Volts 200 amps rated busbar 12 way including taking down carefully existing UNSV main switches, DBS along with MCBs complete all as specified and directed by Engr-in-charge. MAKE-LEGRAND / SCHNEIDER /SEIMENS

S&F double door MCB distribution boards sheet steel, powder coated DBs suitable for MCBs fitted with bus bar, neutral link earth bar and din rail Single phase and neutral confirms to IS : 13032-1991DB, 240 Volts 200 amps rated busbar 8 way, including taking down carefully existing UNSV main switches, DBS along with MCBs complete all as specified and directed by Engr-in-charge. MAKE-LEGRAND / SCHNEIDER /SEIMENS

S&F double door MCB distribution boards sheet steel, powder coated DBs suitable for MCBs fitted with bus bar, neutral link earth bar and din rail Single phase and neutral confirms to IS : 13032-1991DB, 240 Volts 200 amps rated busbar 4 way including taking down carefully existing UNSV main switches, DBS along with MCBs complete all as specified and directed by Engr-in-charge. MAKE-LEGRAND / SCHNEIDER /SEIMENS

S&F for Distribution board (DB) made out of sheet metal enclosure (CRCA sheet) dust and vermin proof TPN 4 way IP 43 (double door) with 200 Amps rated copper bus bar neutral bar ,earth bar ,triple pole and neutral 415volts ,flush to wall including taking down carefully existing UNSV main switches, DBS along with MCBs complete all as specified and directed. .MAKE-LEGRAND / SCHNEIDER /SEIMENS

M&L for MCB single pole,6 to 40 Amp 240 volt C curve 10 KA, IP 20 transparent lebel holder fully insulated safety shutters suitable for cable up to 35Sqmm cross sectional area complete including suitable size copper Lugs complete all as specified and directed MAKE-LEGRAND / SCHNEIDER /HAVELLS/HPL

S&F Miniature circuit breakers ISI marked 240 Volt, 50 Hz, SPN 63 Amps, breaking capacity 10 KA. MAKE-LEGRAND / SCHNEIDER /SEIMENS

S&F single pole and neutral enclouser with a two pin and earth plug and socket complete with one single pole MCB of rating 20 Amps 240 volt grade MAKE-LEGRAND / SCHNEIDER /SEIMENS

M&L for earthing complete with galvanised steel earth plate electrode 600 x 600x 6.0 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanised earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel and connecting to main switch or switch board complete and incl PCC masonry pit of 300x300x300mm interier diamentions in PCC 1:2:4 type B1 RCC cover with GI frame, charcoal dust and common salt 15cm in layers all round the earth plate, 20mm dia GI watering pipe, a funnel with wire mesh should be provided on top of watering pipe complete all as specified as per electric plate No 3of SSR 2009 including testing after completion.

Taking down of existing UNSV service cable and Supply and fixing 1100 volt grade heavy duty cable PVC insulated solid aluminium conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connectiuons suspended by insulating hangers not more than 1 meter apart including 4 mm dia suspension wire, one twin core cable flat or circular of size 6 Sqmm all as specified. Make:- Plaza /Havells/Grandlay

Taking down of existing UNSV service cable and Supply and fixing 1100 volt grade heavy duty cable PVC insulated solid aluminium conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connectiuons suspended by insulating hangers not more than 1 meter apart including 4 mm dia suspension wire, one twin core cable flat or circular of size 10 Sqmm all as specified. Make:- Plaza /Havells/Grandlay

S&L XLPE insulated armoured heavy duty electric cable with stranded aluminum conductor 1100 volt grade cross sectional area 16 Sqmm and 2 core including taking down of existing UG cable all as specified and directed Make:- Polycab/Havells/Grandlay

S&L XLPE insulated armoured heavy duty electric cable with stranded aluminum conductor 1100 volt grade cross sectional area 25 Sqmm and 3.5 core including taking down of existing UG cableall as specified and directed Make:- Polycab/Havells/Grandlay

Dismantling of house service bracket of any type and Supply and fixing house service bracket (hook type) complete with 3.0 mtrs long GI pipe 40 mm dia medium grade two nos 90 degree bends, MS hook and stay or guy complete all as specified

Dismantling of house service bracket of any type and repairs to bracket by straightening and removing bends,replacing broken insulatator and fixing on wall with clamps and nails and making good the wall all as specified and directed at site

M&L for laying GI tubing light grade 40 mm dia with all fittings for cable protection including GI clamps nut bolts and washer etc all as specified.

M & L for Excavating in trenches, in any type of soil not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in any type of soil complete.

M & L for Returning, filling in excavated approved soil, including spreading, leveling, watering and well ramming in layers not exceeding 25cm each complete.

M & L for Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete.

M & L for dry sand cushioning to underground cables with 8cm thick before laying of cables and 15cm thick after laying and stretching of cable all as specified and directed by Engr - in - Charge. (Note:- Punning thickness shall be measured)

Material and labour for Brick protection with sub class ‘B’ bricks old size, laid dry, flat over cable, perpendicular across the cable in trenches complete all as specified and as directed.

S&F bulk head fittings IP-65, surface mounted comprising LED luminaire 10W of high brightness Make : Havells : Cat part No. RUGBYNEONFT10WLED 860SSYMTOPC or equivalent Phillips Cat part WT202W LED6S NW PSU S2PC

Supply and fixing in replacement of building security lights with new generation energy saving & environment friendly long life versatile pressure die-cast aluminium IP65 roadway luminaire with high power LEDs as light source & exclusively designed polycarbonate cover alongwith electronic driver type street light fitting 25 watt capacity LED and including all accessories duly pre-wired, fixing on existing bracket with nut, bolts & washers as required at site for fixing of street light on LT pole/ wall complete including taking old street light fitting any type and description complete all as specified and directed. Make: Havells, Cat Part No ENDURAPEARLSL25WLED757SASYTOPCMP of Havells or equivalent in C&S/Phillips/Crompton

S&F in replacement of Gate lights/post top light with 20 Watt LED light as light source, IP-65, made of spun aluminium landscape luminaire suitable for fixing on 40/50 mm GI pipe on the gate post including connection with all necessary accesssories complete all as specified and directed by Engr-In-Charge. Make : Havells Coral (Opal) Cat part No.CORALMINIPT15WLED757PSYMTOPC or equivalent in Phillips/cropmpton/C&S/Bajaj

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed

S&F LED luminaire 600 mm x 600mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.Make : Crompton Cat type: LPCL-36-CDL(2x2)/ Havells/Phillips /Sysks or equivalent

S&F in replacement of Gate lights/post top light with 40 Watt LED light as light source, IP-65, made of spun aluminium landscape luminaire suitable for fixing on 40/50 mm GI pipe on the gate post including connection with all necessary accesssories complete all as specified and directed by Engr-In-Charge. Make : Bajaj, Model : CELESTA, Cat part No. BGCL40W LED WH or equivalent Havells/ Phillips/cropmpton/C&S

S&F recess type back lit panel 1'x4' 36 Watt LED luminaire 220 V AC with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.Make : C&S Cat type:CYGNUS-C/36W/1X4/W, ordering code: LTCRP36WLED 1x4 or equivalent in Havells/Phillips /Sysks

S&F in replacment of PVC rectangular block for mounting, switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet cover of size 100mmx100mm and 50 mm deep

S&F in replacment of PVC rectangular block for mounting, switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet cover of size 175mmx100mm and 50 mm deep

Supply and fix double pole, RCBOs of 40Amp, 30mA for protection against earth leakage, overload & short-circuit protection in MCB DBs all as specified and directed

Fixing in repairs lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings

Fixing in repairs switch piano flush type singhle pole, one way 5 Amps

Fixing in repairs switch piano flush type singhle pole, one way 15 Amps

Fixing in repairs bell ding dong AC 230 Volts single pole

Fixing in repairs socket out let 2 in 1, 3 pin, 5 and 15 Amps flush type

Fixing in repairs socket out let 2 in 1, 3 pin, 5 Amps flush type

Fixing in repairs switch socket combination 2in 1, 3 pin, 5 &15 Amps flush type universal

Fixing in repairs ceiling rose, 3 phase/PVC/polycarbonate, isolated body

Supply and fix in replacment of single phase electronic meters temper proof LCD display with polycarbonate cover 230 V, 10-60 Amp, accuracy class-I 50 Hz, confirming to IS-13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH

Supply and fix in replacement of three phase electronic meters temper proof LCD display with polycarbonate cover 230 V, 10-60 Amp, accuracy class-I 50 Hz, confirming to IS-13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH

S&F in replacment of PVC rectangular block for mounting, switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet cover of size 100mmx100mm and 50 mm deep

S&F in replacment of PVC rectangular block for mounting, switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet cover of size 175mmx100mm and 50 mm deep

Supply and fix double pole, RCBOs of 40Amp, 30mA for protection against earth leakage, overload & short-circuit protection in MCB DBs all as specified and directed

S&F round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete. Make : Cromption, Havells/Phillips/Crompton/Bajaj

Supply and fix 45 watt LED well glass clear diffuser light, with provision of deidicated mounting eyebolt with PDC aluminium housing with polycarbonate diffuser all as specified and directed. Make : C&S, Product code : ARIES-E/45W cat part No. LTIWE45WLED or equivalent in Cromption, Havells/Phillips/Crompton/Bajaj

Supply and fix 75 watt LED highbay light, with provision of deidicated mounting eyebolt /bracket built in PDC aluminium housing, SMD LED array with integrated lens polycarbonate cover all as specified and directed. Make : C&S, Product code : CORVUS-E/75W cat part No. LTehb75whpled/LS/WOR or equivalent in Cromption, Havells/Phillips/Crompton/Bajaj

S&F in replacement of landscape cylindrical shape LED bollard light with integrated driver, including establishing on ground connecting to the existing cable and make it functional all as specified and directed at site. Make C&S, Bollard : Canis-M series. Product code: CANIS/6W, Cat part No. LTGLCW6WLED

Taking down ceiling/exhaust/wall mounted fan of any size and sweep from its position dismantling fan for servicing and overhauling of following type and size of Fan by dismantling carefully and removing & changing unserviceable parts, dust & grease, cleaning of internal parts with kerosene oil, washing, checking of alignment of shaft, oiling and re-greasing of bearing/bushes including re-assembling, re-fixing in existing position and connecting to electrical system, testing etc complete at site all as specified & directed Engineer-in-Charge.(Note : Bearing, bush, condenser and painting shall be measured and paid separately.)

(a) Ceiling Fan complete up to 1400 mm Sweep

(b) Ceiling fan complete 1200 mm Sweep

(c) Exhaust Fan up to 450 mm Sweep

(d) Wall mounted fan up to 400 mm sweep

Supply & fix following items for replacement of defective accessories :-

(a) Ball bearing for ceiling Fan No 6201 (Make : TATA/NBC/SKF)

(b) Ball bearing for ceiling Fan No 6202 (Make : TATA/NBC/SKF)

(c) Ball bearing for ceiling Fan No 6203 (Make : TATA/NBC/SKF)

(d) Ball bearing for ceiling Fan No 6204 (Make : TATA/NBC/SKF)

(e) Ball bearing for exhaust Fan of 300/450 mm sweep.

(f) Ball bearing for wall mounted Fan of 300/450 mm sweep.

(g) Gun metal bush suitable for 1200/1500 mm sweep ceiling Fan.

(h) Fan condenser of capacity 2.5 mfd epoxy filled type (Make : Universal/Sarada/Epcos)

(j) Fan condenser of capacity 3.15 mfd epoxy filled type (Make : Universal/Sarada/Epcos)

(k) Fan condenser of capacity 4 mfd epoxy filled type (Make : Universal/Sarada/Epcos)

(l) Rubber bush with split pin for ceiling fan

(m) Armature shaft for Ceiling Fan

Materials and labour for rewinding of following Fans with heavy duty super enameled copper wire of existing gauge including all insulation materials, varnishing, heating etc complete all as directed by Engineer-in-Charge :-

(a) Ceiling Fan complete 1200 mm Sweep

(b) Ceiling Fan complete 1400 mm Sweep

(c) Exhaust Fan upto 350 mm Sweep

(d) Exhaust Fan 350 to 450 mm Sweep

(e) Wall mounted fan upto 400 mm sweep

M&L for painting of following Item with two coats of DUCO paint (ISI grade) white using spray machine spray painting with marking fan number including cleaning, washing and preparation of old painted surfaces complete all as directed by EIC:-

(a) Ceiling fan upto 1400 mm sweep complete.

(b) Ceiling fan upto 1200mm sweep complete

(c) Exhaust fan upto 450 mm sweep with black paint.

(d) Wall mounted fan upto 400 mm sweep.

M&L for painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as specified.

S&F canopy for ceiling fan of existing size & make as required at site all as specified and directed by EIC

Supply and replace down rod heavy grade 15 mm dia complete with drilling holes , cutting making threads as per requirement length up to 1.25 mtr , white paint all as specified and directed

S&F exhaust fan blade set complete suitable for 300/350/450 mm size any make /type or as required at site.

S&F exhaust fan frame with clamps, bolt, nuts and louver of suitable size and as required at ground for 300/350/450 mm sweep.

S&F in replacement hanging clamp with bolt, nut, washer, of appropriate size suitable for down rod of ceiling fan any sweep, specification as per existing or samples, all as directed.

S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE five star rated with brushless direct current motor (BLDC)

S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz 1200, Copper winding of sweep 300m

S&F exhaust fan, steel body AC single phase, 230 V of size 300mm sweep with, blades, and frame and louvers

Supply and fix PVC insulated multistrand Copper Cable 3 core size 1 sq mm, in white colour for light fittings and for fan connections from ceiling rose to electric fittings

Balraj and Co

SHRI RAM ENTERPRISES

janta tradrers

M/s Inderlal