Janpad Ayodhya me Utraula Faizabad Allahabad marg ka Chaudikaran evam sudhrinikaran ka karya

Amount

Earthwork in cutting or in embankment in ordinary soil , excavation to be in the form or regular pits not exceeding 0.50m in depth and earthwork in embankment to be in 20 cm layers, including ramming & dressing the surface to required levels and slopes and also including lift up to 1.5 m and lead up to 30 m. The earth cutting to be used in making embankment or to be deposited as spoil banks within 30m (100 ft.) distance as directed by the Engineer - in - charge.

Construction of granular sub-base by providing Close graded material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with Vibratory roller to achieve the desired density, complete as per technical clause 401

Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing.

Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with 43 grade cement @ 310 kg per cum, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing

Providing laying spreading and compacting graded stone aggregate to Stablized Wet Mix Macadam specification including premixing the material with water at OMC in machenical mix plant carriage of mixed material by tipper to site , laying of 1% OPC cement and 3.5% emulsion in uniform layers with paver in sub-base / base course on well prepared surface and compacing with vibratory roller to achieve the desired density.

Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 to 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.

Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects.

Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects

Interlocking Tiles - Rubber moulded reflective Zig-Zag 80mm. Providing and Laying of Interlocking Concrete Block Pavements having thickness 80 mm as per drawings and Technical Specification Clause 1504.

Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days -as per MORT&H Spec. Clause 2100 (Sl. No. 12.04)

Plain/Reinforced cement concrete in wingwall complete as per drawing and Technical Specifications. RCC Grade M20 using batching plant transit mixer & Concrete pump complete work as per MORT&H Spec. Clause 1500,1700 & 2200 (Sl. No. 13.05 E)

Providing, cutting, bending and fixing TMT/HYSD bar reinforcement in reinforced concrete structures complete as per drawings and Technical as per MORT&H Spec. Clause 1600 (Sl. No. 14.02)

Mild steel or iron in plan work shch as reinforced concrete or reinforced brick work(when not included in overall rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorized overlapping shall be measured up to floor two level. Angle 60X60X6mm for stay of cables @ 1.0m C/C

Painting or Vanishing on iron works in small areas or new wood work with one coat of ready mixed priming paint & 2 coat of approved superior ready mixed paint of clear syuthetic varnish including supply of all materials, labour and T & P etc. required for proper completion of work. Paint to be used should confirm to the I.S.I. No. 103-1950 (SI.No 641&642)

Supply and fixing of 110 mm internal Dia PVC Down pipes required for proper completion of work in weep holes. SOR, Ch-1, Sl-17(31) 25m c/c

Supply Erection and commissioning of 9 mtr height decorative having cast iron decorative base, double arm with 120 W LED light fixture inclu. Make Kessic/Neri/Rosa/Simes

Providing and laying of hot applied thermoplastic compound 2.50 mm thick in 100mm widh including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.50 mm is exclusive of surface applied glass beads as per IRC:35. The finished Surface to be level, uniform and free from streaks and holes.

Supply fixing & erection of built up cantilever structure 6.00M Span comprising of one vertical posts of 6.00 M high made up of 300 mm N.B. havi Class M.S. Pipe as vertical member welded with 10mm thick M.S. Plate at top & 12mm plate at bottom. the horizontal truss shall comprise of 50mm dia havy class M.S. pipe and 40mm dia heavy M.S. pipe as bracing & 10 mm M.S. plate bottom for fixing to vertical post as per structure desing & drawing with one of sttel primer and two coats of synthetic enamel plant. the work i/c construction of RCC foundation of size 90Mx90M of required depth as per site condition for built up structure i/c earth work in excavation 100 mm thick lean concrete in 1:4:8 cement sand and 40mm gauge stone ballast. RCC withand 1:2:4 cement coarse sand and 20mm stone grit i/c supply and fixing of 25mm dia foundation bolts 600 mm long as per provision of structure design i/c cost of renforcement & shuttering. as per direction of Engineer in charge.

Supply and fixing rectro reflective sign board made up with 4mm thick aluminium composite panel (ACP) face full coverd with high intesity prismatic retro reflective sheeting of approved specification as per M.O.R.T & H having approved message fully processed on by pressure sensitve equipment banc of ACP with frame of 35x35x4mm angle iron all round and cross with proper clamping arrangement to be fixed in structure. the back of the ACP sheet shall be enamel coated. as per direction of Engineer in charge. (for over head)

M/s Alok Construction

M/s Nirbhay Constructions