Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹4.3 LAccepted-AOC P O PURUWALA TEHSIL PAONTA SAHIB DISTT SIRMOUR 173025 H P | PAONTA SAHIB | SIRMOUR | HIMACHAL PRADESH | 173025 | ₹4.3 L | 1 | Accepted-AOC Awarded to L1 |
| 2 | 2₹4.4 LRejected-Finance 1301 3 SHASTRI NAGAR MEERUT U P 250004 | MEERUT | UTTAR PRADESH | 250004 | ₹4.4 L | 2 | Rejected-Finance L2 |
| 3 | 3₹4.5 LRejected-Finance 284 VEENA NAGAR CAMP DISTT JAGADHARI YAMUNA NAGAR 135001 HARYANA | YAMUNANAGAR | HARYANA | 135001 | ₹4.5 L | 3 | Rejected-Finance L3 |
| Sl No | Description | Qty | Unit | Budh Raj Singh L1 | RAJU ENGINEERING WORKS L3 | V.L. ELECTRICALS L2 |
|---|---|---|---|---|---|---|
| 1.00R/M of hydraulic workof Gumma Power House | ||||||
| 1.01 | Repair and Overhauling of Penstock gate by replacing all the damaged and defective Parts of gate Repair of De-silting valve of intake site of 2x1.5MW Gumma Power House under Andhra Power House Division HPSEBL, Chirgaon The job consists of following works:-
i) Lift the gate and gently rest the Gate on the Service plate form
ii) Visually inspection of cracks and providing suitable treatmentfor it.
iii) .checking the roller bearing .cleaning the wheel / bearing both side with diesel necessary Turing of wheel pins shall be done so as to ensure all wheel touch simultaneously a common plane on the track side. All the bearings /wheels shell be properly greased and thoroughly checked to have minimum possible friction.
iv) Replacement of Rubber seals with new set and the bolts /screw used for fixing the seals are to be tightened to torque specified the screw shall them be locked by punching at four places . The bolts shall also locked by suitable means.,
v) Complete cleaning of old grease from whole wire rope and providing fresh grease on the whole wire rope
vi) Complete overhauling of gear box and replaced the gear oil.
viii)Painting the Gate with water resistant paint
ix) Bring the gate to, their respective location,
x) After reinstallation of gate shell be tested by lowering and raising it number of time for smooth operation
If any additional material is required to put the system operational is to be arranged by the contractor without charging extra cost. | 1 | Job | 2,70,000 ₹3.2 L | 2,75,000 ₹3.2 L | 2,70,500 ₹3.2 L |
| 1.02 | Repair and of 3 Nos.. De-silting valve intake site
Dismantling the. De-silting valve .,Cleaning the rust of valve, Welding/ grinding the the eroded portion of disc damage with silt. Providing the fresh Grease in valve . Providing/fixing the new gasket and Bolts/Nuts Fixing the all valves after repair. | 1 | Job | 57,000 ₹67,260 | 64,000 ₹75,520 | 60,700 ₹71,626 |
| 1.03 | Providing and fixing the 0.75 kw, 3 phase 5O HZ, 400/440 Volt. AC 100 RPM foot mounted induction motor ( make cromton greaves or equivalent make ) having a starting torque not less then 200% rated torque, coupled with 700.1worm gear reduction unit having left and right shaft arrangement. (As per sample.) | 1 | Job | 35,000 ₹41,300 | 42,000 ₹49,560 | 39,500 ₹46,610 |
Tender Value
₹37,000
EMD Value
₹3,700
Closing Date
5 Jan 2026, 11:00 amClosed
RE Andhra
RE Andhra
RM of Hydraulic works of Gumma Power House. Job-3.
2025_HPSEB_124526_1
APHD/2025-26-03
Open Tender
Power/Energy Projects/Products
Work
Please refer Tender documents.
2 documents required · 2 mandatory
₹590
Yes
₹3,700
Yes
12 Jan 2026
27 Dec 2025
5 Jan 2026
27 Dec 2025
5 Jan 2026
27 Dec 2025
Amount
R/M of hydraulic workof Gumma Power House
Repair and Overhauling of Penstock gate by replacing all the damaged and defective Parts of gate Repair of De-silting valve of intake site of 2x1.5MW Gumma Power House under Andhra Power House Division HPSEBL, Chirgaon The job consists of following works:- i) Lift the gate and gently rest the Gate on the Service plate form ii) Visually inspection of cracks and providing suitable treatmentfor it. iii) .checking the roller bearing .cleaning the wheel / bearing both side with diesel necessary Turing of wheel pins shall be done so as to ensure all wheel touch simultaneously a common plane on the track side. All the bearings /wheels shell be properly greased and thoroughly checked to have minimum possible friction. iv) Replacement of Rubber seals with new set and the bolts /screw used for fixing the seals are to be tightened to torque specified the screw shall them be locked by punching at four places . The bolts shall also locked by suitable means., v) Complete cleaning of old grease from whole wire rope and providing fresh grease on the whole wire rope vi) Complete overhauling of gear box and replaced the gear oil. viii)Painting the Gate with water resistant paint ix) Bring the gate to, their respective location, x) After reinstallation of gate shell be tested by lowering and raising it number of time for smooth operation If any additional material is required to put the system operational is to be arranged by the contractor without charging extra cost.
Repair and of 3 Nos.. De-silting valve intake site Dismantling the. De-silting valve .,Cleaning the rust of valve, Welding/ grinding the the eroded portion of disc damage with silt. Providing the fresh Grease in valve . Providing/fixing the new gasket and Bolts/Nuts Fixing the all valves after repair.
Providing and fixing the 0.75 kw, 3 phase 5O HZ, 400/440 Volt. AC 100 RPM foot mounted induction motor ( make cromton greaves or equivalent make ) having a starting torque not less then 200% rated torque, coupled with 700.1worm gear reduction unit having left and right shaft arrangement. (As per sample.)
V.L. ELECTRICALS (BID ID -604887)
RAJU ENGINEERING WORKS (BID ID -604740)
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 3.03 MB
Vol-II.pdf
Tender Documents • 1.51 MB
BOQ_183053.xls
BOQ • 0.23 MB
vol-I.pdf
Tender Documents • 2.40 MB
Download all tender documents and submit your bid