Providing storage tank at Village Pather in G.P. Surajpur (SH- C/O storage tank at Village Pather 12000 liters capacity, and Imp.of GWSS Rachhakara, Kiyari, Sokhar, C/O cut off wall and L/J of G.I. pipe (light class) of various dia in d/ system).

Amount

Excavation in foundation, trenches etc. earth work in all type of soil such as pick work, jumper work, blasting work kankar,moorum singles including decomposed soft and hard rock etc. upto all heights stacking the excavated earth not more than 3 metres clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinths and sides of foundation etc.consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth upto all leads and lifts as directed by the Engineer in charge complete in all respects.

Providing and laying cement concrete 1:4:8(1 Cement :4 Sand : 8 graded stone aggregate 40mm nominal size)and curing complete excluding the cost of form work in foundation and plinth including all carriage of materials upto all leads and lifts complete in all respects.

Providing and laying cement concrete work 1:1 ½ :3 (1 Cement :1 ½ Sand : 3 graded stone aggregate 20mm nominal size)and curing complete excluding cost of form work and reinforcement for reinforced concrete work in :-

In foundations ,footings bases of columns and the like and mass concrete work complete in all respects.

In Walls any thickness (but not less than 0.10meter thickness including attached pilasters,buttresses plinth and string courses etc. from top of foundation(level) upto floor two level including all leads and lifts etc.complete in all respects.

Providing form work with mild steel plates 3.15 mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies height of propping and centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for insitu reinforced concrete work and plain concrete work in :-

Vertical surfaces such as walls(any thickness )partition and the like including attached pillasters, buttresses plinth and string courses and like including all leads and lifts etc. complete in all respects.

Flat surfaces such as soffits of suspended floors,roofs,landings and the like floors etc. upto 200mm in thickness including all leads and lifts etc.complete in all respects.

Providing RCC smooth finishing of the exposed surface with cement mortoe 1:3 (1 Cement : 3 Sand) including carriage of materials upto all leads and lifts complete in all respects.

Providing and laying cement concrete work 1:1 ½ :3 (1 Cement :1 ½ Sand : 3 graded stone aggregate 20mm nominal size)and curing complete excluding cost of form work and reinforcement for reinforced concrete work in :-

Suspended floors, roofs,landings,shelves and their supports,balconies,beams, and girders,bressumers and cantilevers upto floor two level including all leads and lifts etc.complete in all respects.

Providing tor steel reinforcement for RCC work including bending, binding and placing in position complete upto floor two level including cost of binding wires and carriage of materials upto all leads and lifts complete in all respects.

Laying and jointing GMS tube (light class) tube fitting & commissiong testing at site .various dia for inlet, out let, scoure pipe & over flow pipe (earth work in trenches to be measured and paid for separately) including all carriage of materials up to all leads and lifts complete in all respects.

25mm dia.

32mm dia.

40mm dia.

Providing and fixing Gun metal wheel valve of various dia ISI marked superior quality including carriage of materials

40mm dia.

Manufacturing, supply & fixing of M.S frame 35x35x5mm with M.S sheet man hole cover 1.66 mm thickas made of M.S.angle 25x25x5mm with locking arrangement w with lock on each cover and painting with red oxidecomplete in all respects as per drawing & design with in all leads and lifts complete as per the direction of the Engineer- in Charge .

Excavation in drain & channels etc. in earth work including drerssing of side and bed and disposing excavated earth in all leads and lifts disposed earth to be levelled and neatly dressed in pick jumper work including all leads and lifts complete in all respects as per direction of Engineer- in Charge.

Laying and jointing in trenches G.I pipe (Light class) tube fittings & commissiong testing at site (earth work in trenches to be measured and paid for separately) including all carriage of materials up to all leads and lifts complete in all respects.

15mm dia.

25mm dia.

32mm dia.

Providing and fixing Gun metal wheel valve of various dia ISI marked superior quality including carriage of materials

15mm dia.

25mm dia.

32mm dia.

RISHI DEV SHARMA

Sh. Med Ram Govt. Contractor

Anoop Kumar Sharma Govt. Contractor