MISC REPAIR TO FENCING, GATES, CULVERTS, DRAINS AND HARD-STANDING IN TECH AREA AT AF STN ADAMPUR.

Amount

Excavation in trenches in soft/ loose soil n. exc 1.5 m wide and not exceeding 1.5 m deep for foundations or man holes etc. and getting out complete all as specified.

Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified.

Removal of excavated surplus spoil to a distance n. exc. 50m and depositing where directed at level not exceeding 1.5 m above the starting point complete all as specified.

Excavation in post holes (or similar holes) each n. exc 0.5cum, getting out, returning filling in and ramming earth or brocken rubble mixed with earth arround in layers not exc 25cm watering and removing surplus soil to a distance n. exc 50m and making good surfaces etc complete all as specified

Cement concrete (1:2:4) type B-2 using 40mm graded stone aggregate as in foundation filling, mass concrete and foundation of fencing posts complete all as specified.

Cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate as in foundation filling, mass concrete and embeding chain link mesh bottom complete all as specified.

Cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate as in surface channels and drains complete all as specified.

Cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in roof kerbs or mud stops rounded or chamferred on edges complete all as specified.

Cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in benching and coping of drain including necessary moulds and from work complete all as specified.

Precast reinforced cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in manhole cover and set in cement mortar (1:6) etc including necessary form work complete all as specified.

Brick work with sub class ‘B’ old size bricks straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:4) complete all as specified.

Brick work with sub class ‘B’ old size bricks (but except bricks) straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:4) complete all as specified. (Old serviceable bricks retrieved during dismantling shall be re-used after cleaning).

Brick work in half brick thick walls using sub class ‘B’ old size bricks straight or curved on plan to any radius built in cement mortar (1:4) complete all as specified

Brick work in half brick thick walls using sub class ‘B’ old size bricks (but except bricks) straight or curved on plan to any radius built in cement mortar (1:4) complete all as specified. (Old serviceable bricks retrieved during dismantling shall be re-used after cleaning).

Mild steel angle iron conforming to FE-290 Gde E-165 as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc. flat iron fillets (for securing wire mesh etc.) including all drilling, bolting or rivetting etc. and similar works and embedding in concrete and screwing etc complete all as specified

Mild steel work conforming to Fe-290 Gde E-165 quality-A as in grills, gates etc. with ends of bars shouldered and/ or rivetted or forged into spikes; framed guard bars, walkways, railing, barred iron doors, ladders, framed balusteres, walkway, railings, framework of water tanks, and similar works complete all as specified

TMT bars 10mm dia and over cut to length, bent to shape required including bending, cranking etc and binding spirally for hooking for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia, complete all as specified .

Restraining and resecuring including making good staples etc for galvanised 2 strand steel barbed wire of any description, maintaining spacings and straining and fixing to existing rails straining bolts including decuring or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc as directed complete all as specified.

Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings withand provision of galvanised mild steel wire staples or steel pins etc complete all as specified. NOTE: Each line of wire shall be measured separately.

Supply only chain link MS hot dipped galvanised coating fencing (Dia of wire 4mm) having mesh size of 50x50mm centre to centre complete all as specified.

Fixing only chain link fencing mesh of any size and to any type of standards, rail, straining bolts etc including provision of binding wire etc complete all as specified.

Mild steel screw bolts (Machine made) 5 to 10mm dia of neck with hexagonal or square heads at one end and screwed the other or screwed both end each screwed end to fitted with washers and one hexagonal or square nuts exc 5cm but n exc 10cm long fixed etc complete as directed all as specified.

Punched taps CONCERTINA COIL (PTCC) of gauge 2.6mm and using coil of 60cm dia ( spacing of coil wire @ 20cm c/c ) including securing point in crossing and provn of galvanised mild steel wire or steple or steel pin IN REPAIR complete all as specified.

Plain galvanised mild steel sheeting 0.63mm thick fixedas in ridges, hip, valley gutters, crumple joint covers and similar works (length and girth as fixed) with grade of zinc coating 275 etc complete all as specified.

50mm thick PCC (1:2:4) Type B-1 using 20mm graded stone aggregate as in flooring finished even and smooth without using extra cement complete all as specified.

75mm thick PCC (1:2:4) Type B-1 using 20mm graded stone aggregate as in flooring finished even and smooth without using extra cement complete all as specified.

100mm thick PCC (1:4:8) Type D-2 using 40mm graded stone aggregate as in sub base floor,path and hardstanding etc. finished even and smooth without using extra cement complete all as specified.

Chequered cement concrete coloured tiles 25cm x 25cm x 25mm thick in floors / path set, jointed & pointed in neat cement slurry using grey cement and pigment to match the shade laid over and including 20mm thick screed bed in cement mortar (1:6) including necessary cutting as per site requirement complete all as specified.

80mm thick machine pressed precast concrete interlocking paver blocks (any shape and size as ordered) conforming to IS 15658-2006 made out of M-40 grade concrete casted with grey cement and no pigment laid over and including 25mm thick sand cushioning complete all as specified.

Raking out joints or pointing to existing brick work in wall or to bricks on edge in floors, surface channels / drain roof etc complete, all as specified.

Rendering 15mm thick on fair face of brick work or concrete surface in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified.

Preparing newly plastered or pointed surface of walls and applying two coats of cement base paint over a coat of primer complete all as specified.

Preparing surfaces of wood, steel and iron surfaces new or old and any description and girth not otherwise described and treated with tar or coal tar black paint complete all as specified.

Preparing steel and iron surfaces (new) of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

Preparing steel and iron surfaces (new) not exc. 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

450mm bore reinforced concrete pipe class NP2 laid in trenches including jointing & testing complete with collars complete all as specified.

Dismantling fencing wire mesh any type ( chain link mesh and barbed wire mesh) including ites removal to store yard complete all as specified.

Dismantling of wrought iron of mild steel work of any description in any position not otherwise specifically provided for all as specified.

Dismantling posts or struts (wood, steel or RCC) any section including taking out embedded portion (posts embedded in concrete, brick work etc.) and making good the disturbed ground complete all as specified.

Dismantling of stone / boulder, brickwork built in cement mortar including all quoins, arches, pillars etc all as specified.

Demolition of cement concrete (unreinforced) in ground floors and pavings not excceding 15cm thickness (above or below ground level) all as specified.

Demolition of un-reinforced cement concrete of any description in any position not otherwise specifically provided for all as specified.

Notes : (i) Amount of credit for retrieved materials is mentioned in tender documents in pdf form which will be deducted while acceptance of tender offline.

B S ENTERPRISES

PRATHAM TRADERS

LABH SINGH AND SONS

M/s Sahib and Company

MALHOTRA AND ASSOCIATES