Loading
Loading…
Loading…
Tender Value
Refer Docs
Closing Date
30 Jan 2026, 2:00 pmClosed
Single Packet
Normal Tender
No
Not Applicable
Total Value Wise
Lowest to Highest
CONSIGNEE
Not Applicable
60 days
Expenditure
General
IG
2 conditions · 2 needing a document upload
i) Bulk order will be placed on the manufacturer or its authorized dealer/agent (Authorized dealer/agent to quote along with tender specific authorization) having proven performance for Same or similar item. Para No. 2.6 of GCC attached may be referred to, for full details. Bidders are advised to read it carefully before bidding. ii) Tenderers with satisfactory past performance for the tendered or Similar item to any of the Zonal Railways/PUs shall only be eligible for full/bulk order.Tenderers are instructed to upload Receipt note, Receipted challan, Inspection Certificate , CRN, commissioning certificate or any other receipt or commissioning document along with bid as a proof of supply document failing which their offer will not be considered. Purchase Order is not considered as performance. Similar item :Steel or Wooden Furniture.
The tenderer should be comply each and every parameter of Additional Terms & Conditions attached with Tender document. failing which the offer will summarily be rejected.
36 conditions · 3 needing a document upload
[i] Have you attached the past performance credentials with your offer? [ii] Have you mentioned the complete address of the work premises of the OEM where Third Party Inspection (TPI) inspection will be carried out before dispatch of the material?
All the bidders are advised to submit certificate of compliance for sharing land border with India as per the clause 32 and proforma at annexure - 8 of GCC attached
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender condition
FOR:Destination.
Public procurement (Preference to Make in India) is applicable as per para 29.0 (29.1 to 29.4) of GCC attached
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
4 conditions
Payment Terms: No deviation from the Payment Terms stipulated in the tender is permitted.
FOR-Destination: No deviation from the FOR-Destination stipulated in the tender is permitted
Mode of despatch: No deviation from the Mode of despatch stipulated in the tender is permitted.
Unloading of material: Unloading will be arranged by the firm at the consignee end at his own risk and cost. No deviation from Unloading of material stipulated in the tender is permitted.
1 location across West Bengal · 23 Numbers total
Furniture items
IG265099~SER
IG265099
Open - Indigenous
Goods
West Bengal
₹0
Exempted
30 Jan 2026
20 Jan 2026
4 items · 23 Numbers total
Wooden Podium(design Gableend and modesty panel and topmaterial Three layerprelaminat ed particleboard of grade II type II of IS 12823/Latest C3); Specification : 1. To be made of Engineered Woo d, Laminated Board. 2. Frame type : Free standing, Open storage, Three shelves, Angled Reading Surface, To have facilities of fixing Microphone with wire.. 3. Colour - Brown. 4. Size : Width - 60 cms, Depth - 45 cm s, Height - 125 cms (Approx.) 5. The Podium lectern is to be made of Laminated Board Engineered Wood an d to be ideal for all types of stage events like meetings, conferences, lectures, functions, etc. Should have a n open shelf to provide ample storage for all types of important documents or small electronic items like mi crophone. ]
| Delivery Location | State | Quantity |
|---|---|---|
| MATRON-KGP, SER | West Bengal | 1.00 Numbers |
| Total | 1 Numbers | |
Conference Table, Specification : 1. Conference table of Oval Shape of 10 seating capacity. 2 . Size : Length / Diameter/ Major axis of tabletop should be 2400 MM (approx.). x Height : 750 MM (Approx) x Width : 800 MM (Approx.) in two tones with different basic modules having tops made of 36 mm thick me dium density fibre/particle board faced with 0.8mm thick laminate for better scratch and wear resistance. 3 . The table should be provided with wire raceway. 4. All exposed edge of table top is to be provided with 0. 8 mm thick machine pressed PVC edge bands glued with hot melt EVA glue. 5. The vertical members of Co nference Table is to be made of 25mm thick pre laminated medium density fibre/ particle board and modes ty of 18mm thick pre laminated medium density fibre/particle board. 6. All panels should be interconnected with rastex, dowel and sockets and all exposed edge of board should be provided with 0.8mm thick machin e pressed PVC edge bands glued with hot melt EVA glue. 7. Table under structure : Legs with Modesty pane l. 8. Inbuilt socket for LAN / internet. 9. Wire entry system through legs. ]
| Delivery Location | State | Quantity |
|---|---|---|
| MATRON-KGP, SER | West Bengal | 1.00 Numbers |
| Total | 1 Numbers | |
Chair (revolving and non-tilting chair with armrest), Specification : 1. Chair should be Ergono mically designed, 360 revolving type, durable, elegant and comfortable with adjustable seat along with tilti ng back mechanism upholstered with upholstering of fabric or leather foam of approved quality and shade. 2. Seat/Back Assembly : The seat and back shall be made up of 1.2+0.1cm thick hot pressed plywood and upholstered with fabric and Polyurethane Foam of approved shade together with seat and back covers. The back foam shall be designed with contoured lumber support for comfortable seating posture. 3. Seat Size: 50 cm (W) X 51 cm (D). 4. Back Size: 50 cm (W) X 60 cm (H). 5. Polyurethane Foam: The polyurethane foa m for seat and back shall be with 40 density. 6. Armrests: The one piece armrests shall be injection molded from black Nylon. The armrests shall be fitted to the seat with armrest connecting brackets. 7. Permanent Contact Mechanism: The mechanism shall be designed with the following features; 360 degree revolving ty pe. Upright position locking. Tilt tension adjustment. 8. Pneumatic Height Adjustment: The pneumatic heigh t adjustment should be an adjustment of 10.0+0.3cm. 9. Telescopic Below Assembly: The below should be three-piece telescopic type injection molded in black polypropylene. 10. Pedestal Assembly: The pedestal s hall be chromium plated metal fitted with five nos. twin wheel castors. 11. Twin wheel castors: The twin wh eel castors should be injection molded in Black Nylon 12. Make / Brand : Any reputed make or brand. ]
| Delivery Location | State | Quantity |
|---|---|---|
| MATRON-KGP, SER | West Bengal | 20.00 Numbers |
| Total | 20 Numbers | |
Steel Book Shelves with front Glass (confirming to IS 7761 Grade 0 of IS513 MS); Specificatio n : 1. To be made of prime quality CRCA sheet of 0.8mm thickness. 2. Overall size : 1750 mm (H) x 920 mm (W) x 330 mm (D). 3. Number of shelves / compartment : 04 (four) 4. Each compartment is to be provided with a top hung glass door which should swing open upwards and slide into the casing when fully open by means of rollers. 5. For proper alignment of glass door, cross plate (patti) arrangement i.e. scissor system s hould be fitted in each door. 6. The glass should not be more than 3mm thick so that all the books in the sh elves/ compartment are visible. 7. All the components should be neat and clean with strong joints. 8. 02 (tw o) Nos. of good quality handles should be provided on each door with precision lock. Key shall be common f or all compartment lock. 9. The bookcase shall be powder coated epoxy baked finished. ]
| Delivery Location | State | Quantity |
|---|---|---|
| MATRON-KGP, SER | West Bengal | 1.00 Numbers |
| Total | 1 Numbers | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
5634312.pdf
ATTACHMENT
5634311.pdf
ATTACHMENT
5663279.pdf
ATTACHMENT
5634313.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .