Improvements to Moorje Kudkoli road of SH-269 from Km.4.80 (Pangalpadi) to 14.87 (Kudkoli) in Bantwal Taluk. (Job No. CRIF-KNT-2026-27-069)

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials by (Tractor) and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness (for new roads). including cost of all materials, labour, hire charges of of all machinery, loading & unloading, lead, lifts,transportation, with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work. In area of light jungle - By Mechanical Means.

Providing and applying tack coat with VG-10 grade bitumen using bitumen pressure distributor at the rate of 0.20 Kg per sqm on the prepared bituminous surface cleaned with mechanical broom, & dusting by air compressor and spraying including cost of all materials, labour, usage charges of all machinery, loading & unloading, lead, lifts,transportation, with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work.

Providing and laying Dense Graded Bituminous Macadam Grading-II with higher capacity batch type HMP using crushed aggregates as per table 500-7 of specified grading premixed with bituminous binder VG-30 grade paving bitumen as per clause 504.3.1 complying with IS-73-2013 of specified grading, premixed with bituminous binder at 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects including cost of all materials all labour, usage charges of all machinery all lead, lifts, loading, unloading, stacking, transporting with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work.. 50-75 mm compacted thickness. As per Job mix NOTE :- Protection of DGBM layer is as per Clause 504.5 of MORTH Specification for roads and bridges , 5th revision .

Providing and laying Bituminous Concrete Grading-II with higher capacity batch type hot mix plant using crushed aggregates as per table 500-7 of specified grading premixed with bituminous binder VG-30 grade paving bitumen as per clause 504.3.1 complying with IS-73-2013 of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler @ 2% by weight of agregate, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects including cost of all materials all labour, usage charges of all machinery all lead, lifts, loading, unloading stacking, transporting with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work.. 30-40 mm compacted thickness. As per Job Mix

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 laid in layers not exceeding 250 mm thick and compacting it by mechanical means after adding water to its OMC, so as to achieve 97% compaction of maximum dry density and finish the surface to the required camber, grade and cross section etc., speading, grading by motor grador, consolidation by roller, including cost of all materials, labour, usage charges of machinery, barricading, loading & unloading, lead, lifts,transportation, with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work.

Removal of earth from the choked hill side drain and disposing it on the valley side manually, including cost of all materials, labour, loading & unloading, lead, lifts,transportation, with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work.

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads at 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes, including barricading, traffic diversion as per IRC-35, cleaning the surface of dirt, dust and other foreign matter, demarcation at site, traffic control, including cost of all materials, labour, usage charges of machinery, loading & unloading, lead, lifts,transportation, with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work.

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of Class-C Type XI retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 801.3, 4mm thick Aluminium composite material sheet including lettering depending on the size of the sign fixed over back support frame of min 25 x 25 x 3mm Angle mounted on a mild steel circular pipe 65 NB 3.60mtrs high (min effective height 1.90 mtrs),3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67, including curing, cost of all materials, labour, usage charges of machinery, loading & unloading, lead, lifts,transportation, with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work.-90cm Equilateral triangle.

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of Class-C Type XI retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 801.3, 4mm thick Aluminium composite material sheet including lettering depending on the size of the sign fixed over back support frame of min 25 x 25 x 3mm Angle mounted on a mild steel circular pipe 65 NB 3.60mtrs high (min effective height 1.90 mtrs),3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67, including curing, cost of all materials, labour, usage charges of machinery, loading & unloading, lead, lifts,transportation, with all incidental charges, etc., complete as per specification and as directed by the the Engineer-In-Charge for successful completion of work.- 60cm Circular

Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of High Intensity grade sheeting clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminum composite material sheet with overall thickness of 4 mm with area exceeding 0.9 sqm fixed over back support frame of min 40 x 40 x 5 mm MS Angle mounted on two nos. of mild steel circular pipe 65 NB ,3.2 mm thicknness and 4.5 meter total height firmly fixed to the ground by means of properly designed foundation with M 25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing finishing neatly including supplying to site of work , curing concrete work , cost of all materials, labour, usage charges of machinery, loading & unloading, lead, lifts,transportation, with all incidental charges, etc., complete as per specification and as directed by the Engineer in charge of work.