Supply and Installation of LED High Mast Lighting system under AIIM at IA SEZ Moradabad

Amount

Electrical Works.

Supply & Fixing of 16 Mtr. High Mast shaft of approved make with rising system hot dip galvanized in side & out side dip, heaving pole sheet thickness 3 mm top dia minimum 150 mm bottom dia 360 mm base plate 32 mm thick suitable for wing velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 12 luminaries on single ring & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia double drum winch, including making suitable foundation as per manufacture drawing, site requirment along with foundation bolts, nuts washers, anchor plates etc. complete in all respect.(Philips/Crompton/Wipro/Bajaj make)

Supply & Fixing of 12.5 Mtr. High Mast shaft of approved make with rising system hot dip galvanized in side & out side dip, heaving pole sheet thickness 3 mm top dia minimum 150 mm bottom dia 310 mm base plate 25 mm thick suitable for wing velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 luminaries & its control gear boxes 0.75 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia double drum winch, including making suitable foundation as per manufacture drawing, site requirment along with foundation bolts, nuts washers, anchor plates etc. complete in all respect. (Philips/Crompton/Wipro/Bajaj Make)

Supply & fixing of factory wired integral 200 W LED flood light luminaries with die cast aluminium housing built with driver set confirming to IP 66 protection complete in all respect, Minimum Cat.-AA (Philips/Crompton/Wipro/Bajaj Make) having 05 Years warrenty against deffective/damage/Missing.

Supply & fixing of factory wired integral 150 W LED flood light luminaries with die cast aluminium housing built with driver set confirming to IP 66 protection complete in all respect,Minimum Cat.-AA (Philips/Crompton/Wipro/Bajaj Make) having 05 Years warrenty against deffective/damage/Missing.

Supply and fixing 25A TPN capacity of automatic street light cubicle control panel & painted with anticorrosive alkali and acid proof paint consisting of digitel time switch TSO 100 series with contactors, HRC fuses/MCB/isolating switch metering insteument & instrument box with CTs etc. The Panel must have double door, three phase indicator on front door, key locking arrangement with UPSIDA monogram complete in all respect as Technical drawing approved by Engineer in charge.

Supply and fixing 15 A TPN capacity of automatic street light cubicle control panel painted with anticorrosive alkali and acid proof paint consisting of digitel time switch TSO 100 series with contactors, HRC fuses/MCB/isolating switch metering insteument & instrument box with CTs etc.The Panel must have double door, three phase indicator on front door, key locking arrangement with UPSIDA monogram complete in all respect as Technical drawing approved by Engineer in charge.

Supply and wiring of submain with 2 number 2.5 sqmm FRLSH PVC insulated single core multistranded copper conductor cable in existing conduit complete in all respects complete.

Supply and laying of 16 sq.mm 4 core aluminium conductor PVC insulated, armoured, served, sheathed cable 1100 V grade Laying Cable in existing GI/HDPE, DWC PVC pipe or along the ST Pole/Panel/High Mast Lighting System. (Havells/Glostar/Polycab/Grandly)

Supply & Laying of 63 mm HDPE pipe ISI marked along with all accessories like socket,bend,couple etc. confirming to IS 14930 Part II complete with fitting and cutting,jointing etc in below ground level including cost of material,labour and T&P.

Supply & fixing of 16 sq. mm 4 core brass nickle plated compression gland for PVC insulated cable complete in all respect.

Supply & fixing of 16 sq. mm cable socket(lug) to cable leads,insulation tape and making connection for PVC insulated cable complete in all respect.

S/B of 40 mm dia x 4.5 mtr. long G.I. pipe vertically for earthing having 12 mm dia. Holes spaced 75 mm apart drilled upto 2 mtr. from the bottom complete with earthing lead of no.6 to 8 SWG GI wire in G.I.pipe upto appron upto switch board 30 cm square box with hinged cover masonary enclosure. Funnel of top, alternate layers of charcoal and salt at least 150 mm thick alround etc. as per direction E/I complete in all respect.

Supply & fixing of 50 mm dia GI pipe B class for climbing up the cable from ground to over head LT line pole/Metering point complete with GI fitting including material,labour and T&P.(Jindal/Swistik)

Supply & fixing MS clamp made out from 50x6mm MS flat for securing GI Pipe/HDPE with ST pole.

Supply & Laying of 63 mm HDPE/DWC pipe(750-1000mm below ground level) ISI marked confirming to IS 14930 Part II complete with fitting and cutting,jointing etc. through horizontal boring (trenchless) by making pit at regular interval and refilling the pit after work as before on road crossing including cost of all material, men and T&P.