EDCH-72/2024-25

Amount

Supply of Following Matarial as per relevent ISS

Stone Pad

Cross Arm holding Clamp

F-Braket

Clamp for Tee Channel

Earthing Complete

D/Pole Clamp

AL LUG 400 sqmm

I-Hook

Bolt & Nuts

LT Clamp with Bolt & Nut

Pearcing Connector

L.T Distribution Box 3-Phase

Clamp for Distribution Box

Suspension Clamp

Dead End Clamp

Holding Clamp

M.s Top Channel

Dropper Channel

MS Angle T/F base With Clamp

Fuse Set

Scope of work

Safe Carriage of following material from Electricty store center Hts to Pit site of work through the Kacha and Pakka road including loading and unloading at the respective ends including the cost of arrangement of labour, T&P, etc. which required for proper completion of work.(Distance 00-50 Kms.)

Pcc Pole 8.5 Mtr. Long

STP Pole 11 Mtr. Long

11 KV Steel Cross Arm V Type

11 KV Pin Insulator With Pin

11 KV Disc Insulator With Fitting

H.T Tee Channel

ACSR weasel Conductor

Stay set Complete

25 KVA 11/0.4 KV T/F

63 KVA 11/0.4 KV T/F

100 KVA 11/0.4 KV T/F

LT XLPE/PVC Cable 3.5x70 Sqmm

LT XLPE/PVC Cable 3.5x150 Sqmm

XLPE Cable 3x70 sqmm

Cable Jointing Kit Suitable for XLPE Cable 3x70 sqmm

11 KV TPMO with Polymer Insualator

T/F 11/.04 Kv, 250 KVA New

LT XLPE/PVC Cable AL 3.5*400 sqmm

MS Channel

Arreal Bunch Conductor 3x120 sqmm

Arreal Bunch Conductor 3x95 sqmm

Errection of following Poles with grouting including Cutting of kharanja/mettalic road/concrete portion while digging pit & complete H.T./L.T. fittings as per RESPO manual and as per direction of Engineer Incharge including the cost of labour, T&P and carrier etc. required for proper completion of work.

Pcc Pole 8.5 Mtr. Long

STP Pole 11 Mtr. Long

Fixing/ Errection of following item, cost of labor, material and T&P which required for completion of work

11 KV Steel Cross Arm V Type with Clamp

11 KV Pin Insulator With Pin

11 KV Disc Insulator With Fitting

Stone Pad

Cable Jointing Kit Suitable for XLPE Cable 3x70 sqmm

H.T Tee Channel with Clamp

M.S Channel

F-Braket

D/Pole Clamp

AL LUG 400 sqmm

I-Hook

Bolt & Nuts

LT Clamp with Bolt & Nut

M.s Top Channel

Dropper Channel

Pearcing Connector

Holding Clamp

L.T Distribution Box 3-Phase with Clamp

MS Angle T/F base With Clamp

11 KV Fuse Set

11 KV TPMO with Polymer Insualator

Suspension Clamp

Dead End Clamp

Installation of following T/F on newly constructed double pole in proper alignment direction & making HT/LT connection.

25 KVA 11/0.4 KV T/F

63 KVA 11/0.4 KV T/F

100 KVA 11/0.4 KV T/F

Installation of 250 KVA T/F on newly/Old constructed Plinth in proper alignment direction & making HT/LT connection all Cost of labour and T&P which required for completion of work

Safe Dismenteling of old and used following T/F from Double Pole with opening of all HT/LT Jumpers, all works which required for dismentling of T/F.

10/16 KVA T/F

100 KVA T/F

Errection and grouting of stays as per RESPO Norms and as per direction of supervising engineer. Grouting material i.e. cement, sand, brick ballast/stone ballast etc. shall be arranged by the contractor at his own cost.

Fixing of earthing rod as per RESPO Norms and as per direction of supervising engineer.

Laying, sagging and stringing and jumpering / binding etc. of new & old ACSR Weasal conductor / GI in 11 KV / LT lines as per RESPO manual and as per direction of supervising engineer.

ACSR weasel Conductor

LT XLPE/PVC Cable 3.5x70 Sqmm

LT XLPE/PVC Cable 3.5x150 Sqmm

XLPE Cable 3x70 sqmm

LT XLPE/PVC Cable AL 3.5*400 sqmm

Arreal Bunch Conductor 3x120 mm

Arreal Bunch Conductor 3x95 mm

Construction of plinth of size 5' * 5 * 4' above ground level one ft below the ground level of 9" After Exavation of 4 "earth brick ballast shall be provided and rammering will be done properly After ballast shall be provided and rammering will be done properly After that a retaining wall 9"width by fist class brick in ratio 1:4 of cement & sand shall be made . The earth shall be filled up to one ft.below the top of the plinth After this brick ballast shall be provided upto 6"from the earth level and proper rammering shall be done one No. jall of 12 mm MS tor shall be fixed in the hollow of plinth and one ft. thick RCC in ratio of cement sand & stone ballast shall be laid on the top of the plinth. The 12 mm thick plastering shall be done all round the plinth in 1:4 ratio of cement and sand.

Pipe earthing of 250 KVA medium Power Transformers

Net Fencing Shall be 1150*1200 mm made of 35*35 mm MS Angle covered by expended netal 14 SWG up to full Height 1200 mm duly steftened by MS flat by an 8 SWG dia bolt & nut

Re Guarding / Guarding of 11 KV line by laying, stringing, sagging and binding of 2 Nos. parallel GI wire 6 SWG after providing, fabrication and fixing of guarding angle and fabrication and fixing of X-guards (Tillis) of GI wire at distance of 3 Mtr.

Earthing of power T/F (Body & Neutral)

Back Cartage of Following Matarial and carriage it up to Store Hathras/ J.E Store all cost of labour and T&P which required for completion of work

10/16 KVA T/F

LT PVC Cable

100 KVA T/F

Bobby Electricals

P K ENTERPRISES