Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹33.9 LAccepted-AOC | 1 | Accepted-AOC LOWEST BIDDER | |
| 2 | 2₹36.3 L+₹1.5 L (4.19%)Rejected-Finance NEAR LIC OFFICE KALAIGNAR ARIVALAYAM SHOP ROOM NO7 GROUND FLOOR OF BACK SIDE PHOENIX BAY SRI VIJAYA PURAM 744101 | SRI VIJAYA PURAM | SOUTH ANDAMAN | ANDAMAN AND NICOBAR ISLANDS | 744101 | 2 | Rejected-Finance NOT LOWEST | |
| 3 | 3₹36.6 L+₹1.7 L (4.98%)Rejected-Finance | 3 | Rejected-Finance NOT LOWEST | |
| 4 | 4₹39.0 L+₹4.2 L (11.9%)Rejected-Finance | 4 | Rejected-Finance NOT LOWEST | |
| 5 | 5₹39.3 L+₹4.4 L (12.7%)Rejected-Finance | 5 | Rejected-Finance NOT LOWEST |
Tender Value
₹45.0 L
EMD Value
₹1 L
Closing Date
23 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) PALAM DELHI CANTT-10
GE (AF) PALAM DELHI CANTT-10
COMPREHENSIVE MAINTENANCE IN PINTO PARK AREA AT AF STN PALAM UNDER GE AF PALAM, DELHI CANTT-10
2024_MES_648696_1
GENP-12/2024-25
Open Tender
Civil Works
Item Rate
270 days
GE (AF) PALAM DELHI CANTT
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (AF) PALAM
₹1 L
Yes
12 Jun 2024
30 Mar 2024
25 Apr 2024
30 Mar 2024
23 Apr 2024
16 Apr 2024
Amount
Demolition of brick work built in cement mortar, including all quoins, arches, pillars etc of any description including removing debrish from site complete all as specified and as directed.
M&L for cutting holes in brick walls, built in cement mortar or cement lime mortar, exc one brick but n.exc two bricks wall thick, for inserting angle iron of cooler stand or hold fasts and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) type B1 (using 20mm graded stone aggregates) upto four storey buildings as required including scaffolding for four storey building complete all as specified and as directed.
M&L for cutting holes in brick/RCC walls or PCC/ RCC steps, built in cement mortar for inserting hold fasts including angle iron (50x50x5)mm for step nosing and 10cm long flat (25x3)mm as hold fast and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) type B1 (using 20mm graded stone aggregates) as required complete all as specified and as directed.
Taking down cement plaster or cement lime plaster on brick or stone walls etc including raking out joints, hacking for keys, scrubbing down with water etc, upto four storey building complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premices complete all as specified and as directed.
Dismantling of stone slab and tiles of any description or thickness in foor, aprons etc laid, bedded and pointed in any mortar complete all as specified and as directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc. 15cm thickness (below or above ground level) including removal of debrish out of MoD Land complete all as specified and as directed.
Demolition of RCC of any description and in any position not otherwise specifically provided for complete all as specified and as directed.
Dismantling water tanks exc 250 & n exc 500 Ltrs capacity and removing to contractor's store complete all as specified and as directed.
Taking up or down 15mm bore steel tubing pipe and connections in walls, ceiling, floors, etc including cleaning for refixing complete all as specified and as directed.
Taking up or down 20mm bore steel tubing pipe and connections in walls, ceiling, floors, etc including cleaning for refixing complete all as specified and as directed.
Taking down CI, AC, PVC pipes of 100/110mm dia of any description including all fittings complete all as specified and as directed.
Description all as per ser item No. 12.00 above but 75/80 mm dia pipes complete all as specified and as directed.
Description all as per ser item No. 12.00 above but 150 mm dia pipes complete all as specified and as directed.
Taking down chowkhat or frame with shutters (without taking off shutter from the frame) area n exc. 1.5 sqm each but complete all as specified and as directed.
Taking down chowkhat or frame with shutters (without taking off shutter from the frame) area exc. 1.5 sqm but n exc 4.0 sqm each complete all as specified and as directed.
Taking down shutters of any description area exc 1 sqm and n exc 2 sqm each complete all as specified and as directed.
Taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each and refixing in the same opening after necessary repairing viz shifting of hinges/ tower bolt/handle position etc., complete all as specified and as directed. Note:- The cost of screws, misc items shall be deemed to be included in the quoted rates.
Dismantling of wrough iron mild steel work any type any description not otherwise provided for complete all as specified and as directed.
Hacking out old broken glass, any thickness, size, quality, or description from wooden/metal frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete upto four storey complete all as specified and as directed.
M&L for brick work with old size sub class `B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.
M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6) surface finished even and smooth without using extra cement complete all as specified and as directed.
M&L for 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement morter (1:4), surface finised even and smoth with liqiuid water proofing compound by weight as per manufacture's instructions upto and including four storey complete all as specified and as directed. Note:- WPC shall be measured and paid separately and cost of scaffolding rates shall also deemed to be included in the item.
M&L for 10mm thick plaster on fair faces of brick work or concrete surfaces in cement mortar (1:3) as in ceilings, surface finished even and smooth without using extra cement complete all as specified and as directed.
M&L for preparing plastered or unplastered new surfaces of walls including brooming down or steel wire brushing, scraping down and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and as directed.
M&L for preparation of surfaces plastered or unplastered new surfaces of walls including brooming down or steel wire brushing, scraping down and applying two coats of cement base paint of approved colour and shade over a coat of primer complete all as specified and as directed.
M&L for preparation of new plasterd or unplasterd external wall/ceiling surface and applying two coats of weather proofing exterior acrylic emulsion paint over priming coat premium quality on wall/ceiling surface, sand papering make surface even and smooth for G+3 Buildings complete all as specified and as directed.
M&L for preparing plastered or unplastered new surfaces of ceilings including brooming down or steel wire brushing, scrapping down and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and as directed.
M&L for anti skid coloured ceramic tiles, 7 to 8mm thick (squre or rectangular) area of each tile exceeding 0.11sqm but n. exc. 0.18sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces, with and including over 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.
Description all as per ser item No. 29.00 above but as in skirtings with and including over 10mm thick plaster in CM (1:4) complete all as specified and as directed.
M&L for non skid coloured ceramic tiles, 7 to 8mm thick (squre or rectangular) area of each tile n. exc. 0.11sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces, with and including over 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.
M&L for coloured glazed ceramic tiles in vertical surfaces of size (450x300)mm x 7mm thick, set and jointed in cement slurry and pointed in white or coloured cement to match with and including 10mm thick cement rendering in cement mortar (1:4) complete all as specified and as directed.
M&L for vitrified tiles coloured, light shade 10mm thick, area of each tile n exc 0.36 Sqm in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces, with and including over 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.
Description all as per ser item No. 33.00 but as in skirting /dado laid over 10 mm thick bedding layer of CM (1:4) complete all as specified and as directed.
M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, walls, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with and including over 15mm thick screed bed or bedding layer of cement morar (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
M&L for machine cut Kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with and including over 15mm thick screed bed in CM (1:4) complete all as specified and as directed.
M&L for machine cut Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with and including over 10mm thick rendering in CM (1:4) complete all as specified and as directed.
M&L for 16 to 18mm thick green marble slabs (of any type) work (table rubbed and polished) as in steps, risers, jambs, pillars, window cill, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble with and including over 15mm thick screed bed in CM (1:4) complete all as specified and as directed.
Making holes on kitchen platform, facilitate to insert gas tubing in appropriate size and shape complete all as specified and as directed.
M&L for factory made coloured chequered cement concrete tiles of size (30cm x 30cm) x 25mm thick, set and jointed with gre cement and pointed in neat cement slurry in floors with white cement and pigment with and including over 20mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.
M & L for hard core of broken stone gauge n exc 63mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.
M&L for providing Cement concrete (1:4:8) type D-2, (using 40mm graded stone aggregate) as in foundations, filling, mass concrete and sub-base including use and waste of necessary form work complete all as specified and as directed.
M&L for providing 25mm thick Cement concrete (1:2:4) type B-1, (using 20mm graded stone aggregate) complete all as specified and as directed.
M&L for providing 25mm thick precast cement concrete louvers and jallies, type C-0, 1:3:6, set in cement mortar (1:6) (measured solid), including all mould- ings complete all as specified and as directed.
M&L for cement concrete (1:2:4) type B1 (using 20 mm graded stone aggregate) as in copings, window cills, kerb stone for foot path and similar items with plain fair finishing including chamfers, weathering, throating etc and set in CM (1:4) complete joints to match complete all as specified and as directed.
S&F for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, slabs hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified
M&L for RCC (1:2:4) (Nominal Mix), type B-1 (using 20mm graded stone aggregate) as in slabs supported on walls/beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.
Use and waste of formwork to soffits and sides of slabs/ platform or suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.
S&F for 500 ltr rotational moulded polyethylene water storage tanks three layered (cylindrical vertical with closed top), hoisted and fixed in position complete all as specified and as directed.
S&F ball brass valves 20 mm bore, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.
M&L for GI tubing, 15mm bore `medium grade` with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.
M&L for GI tubing 20mm bore `medium grade` with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.
Supply and Fixing 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with and including suitable PVC clamps at one meter of interval complete all as specified and as directed.
Description all as per ser item No. 53.00 here-in-before but 75 mm bore dia complete all as specified and as directed.
Description all as per ser item No. 53.00 here-in-before but 150 mm bore dia complete all as specified and as directed.
S&F in repairs for PVC (SWR) bends of radius, suitable for 110mm dia PVC pipes fixed complete all as specified and as directed.
All as per item here-in-before but 75 mm bore dia complete all as specified and as directed.
All as per item here-in-before but 150 mm bore dia complete all as specified and as directed.
S&F in repairs for PVC junction single, (Single T) equal or unequal, suitable for 100/ 110mm dia of PVC pipes fixed complete all as specified and as directed.
Description all as per ser item No. 59.00 here-in-before but 75 mm bore dia complete all as specified and as directed.
Description all as per ser item No. 59.00 here-in-before but 150 mm bore dia complete all as specified and as directed.
S&F rolled mild steel grade Fe-290 Gde-E-165 quality-A as in framing for doors cladding, chowkhats/frame or cooler stand like etc welding hold fast, hinges complete all as specified and as directed.
S&F 35 mm thick flush shutter solid core construction, with block board core and plywood face panels, commercial type on both sides and covered with decorative face laminated on both side complete all as specified and as directed.
M&L for 2nd class hard wood factory made 35mm thick glazed and skelten shutters open repated and prepared for door to receive framing plain chamfered or rounded fitted with cut and mitered heads for securing glass/wire mesh etc size of member of shutter with sash bar complete all as specified and as directed.
S&F factory made PVC door frame of size 50mmx47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification and drawing complete all as specified and as directed.
Supply and fixing for factory made Solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC shets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC shet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at site as per specification and drawing complete all as specified and as directed.
S & F for steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.
S&F steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars complete all as specified and as directed.
M&L for 2nd class softwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed.
S&F for 2nd class softwood Plain fillets, Sectional area exc 13 sq cm and n. exc 25 sq cm square, rectangular or triangular in section, clean sawn, secured with nails or beads complete all as specified and as directed.
M&L for framed work such as grills, gratings etc with ends of bars shouldered and or reveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.
M&L for cement concrete (1:2:4) type B-1 (using 12.5mm graded stone aggregate) for fixing of hold fasts and clamps etc complete all as specified and as directed.
S & F in repalcement for 18/19mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws as in cup boards, shelves and pelmet boxes etc complete all as specified and as directed.
S & F factory made 18 mm (+0.7mm) thick celuka PVC board of density 600 kg/cum manufactured by an ISO 900-2008 certified company having one side perlaminated and other side plain fixed as in cabinet/ cupborad shutters including provding manufactures test report and test certificate is mandatory with each and every supply of material including taking down of exiting shutter or any kind of PL board or plyboard completed all as specified and directed.
S & F factory made 18 mm (+0.7mm) thick celuka PVC board of density 600 kg/cum manufactured by an ISO 900-2008 certified company fixed as in shelves perlaminated/ cabinet/cupboard drawers including provding manufactures test report and test certificate is mandatory with each and every supply of material including taking down of exiting Shenves or any kind of PL board or plyboard completed all as specified and directed.
S & F factory made 5 mm thick PVC sheet of density 600 kg/cum manufactured by an ISO 900-2008 certified company, plain 5 mm thick PVC sheet panelling for back side (wall side) and also manufactures test report and test certificate is mandatory with each and every supply of material including taking down of exiting back side (wall side) or any kind of PL board or plyboard completed all as specified and directed.
S&F for MS butt hinges 100mm size, cold rolled, medium weight fixed with screws to wooden frames or welding to steel frames etc complete all as specified and as directed.
S & F Continuous (piano) hinges, width of flaps 30mm (when opened) mild steel, bright finish or electrogalvanised complete all as specified and as directed.
S&F aluminium anodized barrel tower bolts of extruded section length of bolt 200mm long complete all as specified and as directed.
S&F aluminium anodized barrel tower bolts of extruded section length of bolt 150 mm long complete all as specified and as directed.
S&F aluminium sliding door bolt, 300 mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections or cast alluminium alloy including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.
S&F extruded aluminium alloy cold rolled handles, fabricated type, anodised, 125 mm size complete all as specified and as directed.
S&F for extruded aluminium alloy cold rolled handles, fabricated type, 100 mm size complete all as specified and as directed.
S&F aluminium anodised hasp & staple including bolt hinge plate and fixed with screws 100mm size complete all as specified and as directed.
S&F aluminium door stopper double legged with rubber shoe 75mm long fixed to door shutters complete all as specified and as directed.
S&F mild steel 300mm long, ordinary rat tail rod pattern springs including roller and roller plate complete, fixed with screws to wooden frame or welding to steel frames etc complete all as specified and as directed.
S&F Galvanised mild steel wire cloth 0.36 mm nominal dia of wire and average width of apertupre 1.40mm and fixed with tinned tacks or galvanised wire staples and welding complete all as specified and as directed.
S&F in repair for galvanised mild steel wire cloth 0.36 mm nominal dia of wire and average width of apertupre 1.40mm and fixed with tinned tacks or galvanised wire staples and welding complete all as specified and as directed.
M&L for sheet glass 4mm thick ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane upto 4th storey building complete all as specified and as directed.
Description all as per ser item No. 89.00 above but exc 0.50 Sqm in each pane complete all as specified and as directed.
S&F in repair 25mm/ 30mm dia stainless steel fancy type curtain rods including all fittings and fixture, bracket or wall to wall bracket Lattu etc complete all as specified and as directed.
S&F in repair 25mm/ 30mm dia aluminium powder coated fancy type curtain rods including all fittings and fixture, bracket or wall to wall bracket Lattu etc complete all as specified and as directed.
Supply only Liquid water Proofing Compound complete complete all as specified and as directed.
M&L for preparing plastered or unplastered old surfaces on walls including brooming down or steel wire brushing, scraping down smoke soots etc and applying one coat of oil emulsion distemper white or tinted complete all as specified and as directed.
Description all as per ser item No. 94.00 above but as on celling complete all as specified and as directed.
M&L for complete removal of existing treatment including preparing old surfaces on walls and applying two coats of distemper oil emulsion white or tinted over a coat of primer, complete all as specified and as directed.
M&L for applying 1mm (minimum) thickness cement base wall care putty over old/New wall plastered surfaces, preparatory to distempering getting even and smooth surface, complete all as specified and as directed.
M&L for preparation of old painted surfaces of wood and wood based material of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
Description all as per ser item No. 98.00 above but not exc 10cm width or girth complete all as specified and as directed.
M&L for preparation of old painted surfaces of steel and iron surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
Description all as per ser item No. 100.00 above but not exc 10cm width or girth complete all as specified and as directed.
M&L for preparation of old decorated external wall/ceiling surface of existing treatment by scrapping with Trucare Wall Sander : L-01/H-01 (having mechanical vaccum mechanism) having RPM not less than 1500, sand pad of 80 grit having dia of 7"/9" to make the surface free from dust, loose paint etc or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and applying Two coats of wheather proofing exterior acrylic emulsion paint over priming coat premium quality on wall/ceiling surface including applying 1mm thick wall care putty over disturbed surface during preparation of any reason, sand papering thus make surface smooth and for G+3 Buildings complete all as specified and directed.
M&L for preparation of old decorated external wall/ceiling surface of existing treatment by scrapping with Trucare Wall Sander : L-01/H-01 (having mechanical vaccum mechanism) having RPM not less than 1500, sand pad of 80 grit having dia of 7"/9" to make the surface free from dust, loose paint etc or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and applying one coat of wheather proofing exterior acrylic emulsion paint over priming coat premium quality on wall/ceiling surface, sand papering make surface smooth and for G+3 Buildings complete all as specified and directed.
M&L preparation of old decorated external wall/ceiling surface by mechanised sander Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible, making surface smooth and applying one coats of cement base paint on walls complete all as specified and as directed.
M&L for preparation of new or previously untreated surfaces of wood of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
M&L for preparation of new or previously untreated surfaces of steel of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
Description all as per item No. 106.00 above but except one coat of zinc chrome primer completed all as specified and as directed.
S&F in repair for bib taps 15mm bore, cast copper alloy with crutch or butter fly handle, chromium plated, fancy type, screwed down, screws for iron pipe or for brass ferrule and fixed complete all as specified and as directed.
S&F in repair for pillar cock 15mm bore, foam flow chromium plated, fancy type, capstan heads, screwed down high pressure complete all as specified and directed.
S&F in repair for Brass CP mixer 15mm for WHB mixing hot & cold water, foam flow chromium plated, fancy type, screwed down high pressure complete all as specified and as directed.
S&F in repair for stop valves, 15mm bore, chromium plated, fancy type, screwed down, high pressure with cruth or butterfly handle, screwd both ends for iron pipe or for unions and fixed complete all as specified and as directed.
S&F in repair for Angle valve, 15mm bore, chromium plated, fancy type, screwed down, high pressure with cruth or butterfly handle, screwd both ends for iron pipe or for unions and fixed complete all as specified and as directed.
S&F in repairs brass chromium plated shower rose 125mm with swivel joints, any size, with and including minimum 200mm long arms fixing to steel pipe or union complete all as specified and as directed.
S&F in repair PVC flushing cistern of 10 ltrs capacity valveless, syphonic action type, low level, white with inlet, ball valve, float and handle including brackets and PVC flush pipe of 32 mm bore and connection to pipes etc complete all as specified and as directed.
S&F in repairs PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and as directed.
S&F in repairs PVC connections 15mm size with PTMT nuts of length 450 mm complete all as specified and as directed.
S&F in repairs 32 mm dia PVC waste pipe suitable for waste coupling 32mm/40mm mm dia 1000mm long complete all as specified and as directed.
S&F in repair CP towel ring fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed.
S&F in repair Tubular towel rail, 20mm dia, brass chromium plated, D type, 60cm long between flange including chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed.
S& F in repairs 15mm Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and as directed. (Minimum weight 15mm - 90gms)
S &F in repairs 15mm Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and as directed. (Minimum weight 90gms)
S &F in repairs 20mm Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and as directed. (Minimum weight 92gms)
S &F in repairs 15mm Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and as directed. (Minimum weight 90gms)
S &F in repairs 20mm Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and as directed. (Minimum weight 125gms)
S&F in repair sink with drainage board made of stainless steel 1mm thick kitchen or laboratroy with plugs, washers and waste, including sink coupling and bedding in cement mortar on to dwarf wall or including fixing cantilever barckets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified and directed.
S&F in repair sink made of stainless steel 1mm thick kitchen or laboratroy with plugs, washers and waste, including sink coupling bedding in cement mortar on to dwarf wall or including fixing cantilever barckets and connecting union to pipe, over all size 495mmx420mm, bowl size 410mm x 330mm x160mm complete all as specified and as directed.
S&F in repairs stainless steel plate rack of overall size 600mmx900mm and weight not less than 6 Kgs complete all as specified and as directed.
S&F in repairs CP health faucet with 1 mtr tube and hook complete all as specifid and as directed.
S&F in repair vitreous china squatting pan white Orissa patern size (580x440)mm with integral foot rests (excluding flushing cistern & flush pipe) with cast iron 'P' trap including lime concrete bedding and making good the disturbed portion to match with the existing surface of floor complete all as specified and as directed.
S & F in repair white European water closet set vitreous china including cast iron P' trap incl lime concrete bedding and making good the disturbed portion to match with the existing surface of floor fixed complete all as specified and as directed.
S&F in repairs Plastic water closet seat cover, white, closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device fixed complete all as specified and as directed.
S&F wash hand basin vitreous China flat back (550x400)mm size white including MS bracket complete all as specified and as directed.
S&F in repair cast copper alloy CP waste coupling 32mm size, fixed to WHB/Sink complete all as specified and as directed.
M&L in replacement of MS brackets with 2 Nos (35x35x5)mm angle iron and two coats of synthetic enamel paint over a coat of red oxide primer of required length for placing the WHB/Sink etc including taking down and refixing of existing WHB/Sink etc and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) type B1 (using 20mm graded stone aggrgates) as required complete all as specified and as directed.
M&L for welding work upto four storey buildings in repairs in any position or any thickness of metal and including cleaning and preparing the surfaces to be welded together and additional piece of metal, if required, holding the members in true position, welding and bevellign of edges as required also including taking down the article and refixing in same position after welding and grinding upto true level complete all as specified and as directed.
Cleaning of PVC over head service tank capacity exceeding 250 liters but not exceeding 500 litres, cleaning by brooming, removing all dirt, vegetation grown on roof, around tank if any, washing the tank with approved bleaching powder rendering it clean to store potable water after applying two coats lime wash internally including writing the date of cleaning and capacity of tank with white synthetic enamel paint (letters not exceeding 30 centi metre height) on the outlet surface directly visible complete all as specified and as directed.
RK TRADERS
M/S Davinder Kumar
GIR RAJ BUILDERS
JAIPAL AND BROTHERS
Usha Contractors and Engineers
Gaurav India Corporations
Kunal Construction Co.
VIJAY KUMAR GUPTA
H.B. Traders
DEV CONSTRUCTION
stage.html
html • 0.07 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .