GE/SP/ TOKEN-29/2021-22

Amount

Excavation in trenches in any type soil /rock (soft/loose/hard/dense soil/rock) n.exe 1.5 mtr wide and n.exe 1.5 mtr in depth for foundation laying of pipe etc n.exe 10 sqmm on plan and n.exe 1.5 mtr in depth and getting out complete all as specified and directed by Engineer-in-charge. NOTE : while removing the pipe line. Contractor shall replaced the broken tiles with new as per existing . The quoted rates including for all the materials / t&p / machinery used in this item no material can paid / measured seperately

Returning filling in including spreading levelling watering and well ramming hard / dense soil in layers not.exe 25cm each layers complete all as specified and directed by Engineer-in-charge

Removal of excavated material & surplus spoil to a distance n.exe 50 mtr and depositing where directed at a level not exe 1.5 mtr above the starting point complete all as specified and as directed by Engineer-in-charge

Taking up cast iron water mains of 100mm bore including all fittings with spigot and socket end and lead joints including burning out joints and recovering lead complete all as specified and as directed by Engineer-in-charge

All as per sr item No 4 above but 150mm bore complete all as specified and as directed by Engineer-in-charge.

All as per sr item No 4 above but 200mm bore complete all as specified and as directed by Engineer-in-charge.

All as per sr item No 4 above but 250mm bore complete all as specified and as directed by Engineer-in-charge.

Cutting to cast iron pipes of 80mm bore before laying in position for insertion of new tees, branches, bend and new connection etc complete all as specified and as directed by Engineer-in-charge

All as per sr item No 8 above but 100mm bore complete all as specified and as directed by Engineer-in-charge

All as per sr item No 8 above but 150mm bore complete all as specified and as directed by Engineer-in-charge

All as per sr item No 8 above but 200mm bore complete all as specified and as directed by Engineer-in-charge

All as per sr item No 8 above but 250mm bore complete all as specified and as directed by Engineer-in-charge

Supply and laying in replacementcast iron pipes of 100mm bore with spigot and socket ends centrifugally cast class LA in any length laid in trenches complete all as specified and as directed by Engineer-in-charge. Make :- Electrosteel / Neco / Kesoram / Electrotherm

All as per sr item No 13 above but 150mm bore complete all as specified and as directed by Engineer-in-charge

All as per sr item No 13 above but 200mm bore complete all as specified and as directed by Engineer-in-charge.

All as per sr item No 13 above but 250mm bore complete all as specified and as directed by Engineer-in-charge.

Supply and fixing and testing of CI fittings flange and sockets / all socketed / all flanged type such as bend upto 150mm bore (any type radius and angle) tapers any type (straight, bend, increasing, descreasing or double socket etc), Tee piece single branch, 'Y' junction, double branch cross (all sockets or socket and spigot) collors, caps and plugs including dewatering complete all as specified and as directed by Engr in Charge. NOTE : Excavation earth work in any type of soil/Rock and run lead joints tighten joints rubber gasket shall be measured and paid seperately

All as per above item No 17 here-in-before but 200 to 300mm bore complete all as specified and as directed by Engineer-in-charge.

Supply and fixing in replacement sluice valve cast iron with brass spindle PN-1.6 and fly nut flanged both ends and drilled for jointing wheel head type conforming to IS 14846 including two flanged joints with nuts bolts and washers rubber insertion packing etc for 250mm bore pipe ISI marked complete all as specified and as directed by Engr-in-Charge. Make :- Zoloto / Kartar/Leader

All as per above item No 19 here-in-before but 200mm bore complete all as specified and as directed by Engineer-in-charge.

All as per sr item No 19 above but 150mm bore complete all as specified and as directed by Engineer-in-charge.

All as per sr item No 19 above but 100mm bore complete all as specified and as directed by Engineer-in-charge.

All as per sr item No 19 above but 80mm bore complete all as specified and as directed by Engineer-in-charge.

Supply and fixing in replacement jointing to cast iron pipe of size 250mm bore spigot and socket by run lead joints including spun yarn and caulking of lead joints complete all as specified and as directed by Engineer-in-charge.

All as per sr item No 24 above but 200mm bore complete all as specified and as directed by Engineer-in-charge

All as per sr item No 24 above but 150mm bore complete all as specified and as directed by Engineer-in-charge

All as per sr item No 24 above but 100mm bore complete all as specified and as directed by Engineer-in-charge

All as per sr item No 24 above but 80mm bore complete all as specified and as directed by Engineer-in-charge.

Taking out existing GI pipe 80mm dia from trenches / walls / roof / floor etc including connection and cleaning for refixing or removal and making good to distrubed area (surface of walls / floor etc) complete all as specified and as directed by Engineer-in-charge.

All as per sr item No 29 above but size 50mm bore complete all as specified and as directed by Engineer-in-charge.

All as per sr item No 29 above but size 32/40mm bore complete all as specified and as directed by Engineer-in-charge

All as per sr item No 29 above but size 25mm bore complete all as specified and as directed by Engineer-in-charge.

All as per sr item No 29 above but size 20mm bore complete all as specified and as directed by Engineer-in-charge.

All as per above item No 29 here-in-before but size 15mm bore complete all as specified and as directed by Engineer-in-charge.

Supply and fixing GI tubing medium grade 80mm dia with all fittings complete laid in trenches / on walls / on ceiling / roof etc incl necessary suitable size of MS clamps / saddling on walls / ceiling etc complete all as specified and as directed by Engineer-in-charge. Make :- Jindal / Tata

All as per sr item No 35 above but size 50mm dia bore complete all as specified and as directed by Engineer-in-charge.

All as per above item No 35 here-in-before but size 40mm dia bore complete all as specified and as directed by Engineer-in-charge.

All as per above item No 35 here-in-before but size 25mm dia bore complete all as specified and as directed by Engineer-in-charge.

All as per above item No 35 here-in-before but size 20mm dia bore complete all as specified and as directed by Engineer-in-charge.

All as per above item No 35 here-in-before but size 15mm dia bore complete all as specified and as directed by Engineer-in-charge.

Cutting and screwing to existing MS / GI steel tubing for alteration or addition to pipe line of 40 to 50mm bore with new fittings and fixtures complete all as directed by Engineer-in-charge.

All as per above item No 41 above but size 80 to 100 mm dia bore complete all as specified and as directed by Engineer-in-charge.

Supply and fixing in replacement gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe 50mm dia complete all as specified and as directed by Engineer-in-charge. Make :- Sant / Kartar / Zoloto

All as per above item No 43 above but size 32 /40mm dia bore complete all as specified and as directed by Engineer-in-charge..

All as per above item No 43 above but size 25mm dia bore complete all as specified and as directed by Engineer-in-charge.

All as per above item No 43 above but size 20mm dia bore complete all as specified and as directed by Engineer-in-charge.

All as per above item No 43 above but size 15mm dia bore complete all as specified and as directed by Engineer-in-charge.

Supply and fixing in replacement PVC bib cock 15mm dia complete all as specified and as directed by Engineer-in-charge. Make :- Prayag / Polytuf

Supply and fixing in replacement PVC PTMT float valve 20/25 mm dia complete with PVC ball and connecting rod complete all as specified and as directed by Engineer-in-charge. Make :- Prayag / Polytuf

Supply and fixing in replacement cast iron non return valve flanged end conforming to IS 5312 of size 80mm dia complete with rubber flange, MS nuts & bolts complete all as specified and as directed by Engineer-in-charge. Make :- Kartar / Zoloto / Sant

All as per above item No 50 here-in-before but 100mm dia complete all as specified and as directed by Engineer-in-charge.

All as per above item No 50 here-in-before but 150mm dia complete all as specified and as directed by Engineer-in-charge.

All as per above item No 50 here-in-before but 200mm dia complete all as specified and as directed by Engineer-in-charge.

Supply & Fixing In Replacement Of Water Meter 200mm Bore Including Rubber Packing Sheets, Nuts, Bolts etc complete all as specified and directed by Engr-in-Charge. Make : - Kranti / Kirlosker / Deshmesh

Supply & Fixing In Replacement Of Water Meter 150mm Bore Including Rubber Packing Sheets, Nuts, Bolts etc complete all as specified and directed by Engr-in-Charge. Make :-Kranti / Kirlosker / Deshmesh

M&L Brick work with sub-class 'B' bricks straight on plan built in CM 1:4 for pipe line supports complete all as specified and as directed by Engineer-in-charge.

M&L for PCC 1:2:4 type B-1 using 20mm graded aggregate built in CM for copping pipe line support complete all as specified and as directed by Engineer-in-charge.

M&L for PCC foundation 1:2:4 type B-2 using 40mm graded aggregate built in cement mortar complete all as specified and as directed by Engineer-in-charge.

M&L for plastering work 15mm thick on fair faces of brick work on concrete surfaces in 1:4 cement mortar for pillar supports complete all as specified and as directed by Engineer-in-charge.

Making good for road to existing surfaces with using of patch premix bitumenous 25mm thick polymer based material over WBM 75mm thick including rolling etc complete all as specified and as directed by Engineer-in-charge

M & L for Design, development, supply commissioning & testing EHCC certified ground tubular effective Tripot type chemical earthing system ( CPRI tested for 15 KA current capacity for LT line) highly anticorrosive long life electrode with and including adequate protective coating to withstand severe wear conditions in the earth pit of the standard size comprising of 25mm x 3mtr long copper rod as primary conductor and hollow pure Copper tube of dia 50mm x 3mtrs long as secondary conductor to install with suitable connection terminal coforming of IS 3043: 1987 specification, highly conductive packing material to be filled in earth pits for providing uniform, low resistivity anticorrosive, hygroscopic medium around the earth system for improving the efficiency of current dissipation 02 Bags / 60 Kgs minimum or sufficient quantities required as per site complete including FRP earthing pit clause suitable cover, material and labour including 32x6mm earthing strip 10mtr length and testing after completion and result should be less than one Ohm complete, all as specified and as directed by Engineer-in Charge. Note:- Excavation for earthing in any surface hard/rock/soft soil for required length by using rock driller machine/other eqpt is inclusive in quoted rate and necessary earthing pit 60x60x6cm also inclusive in quoted rate.

M&L for earth continuity conductor of size 32x6 mm galvanised strip fixed on walls / burried in ground with and including fixing arrangments on walls like porcelain insulators screws washers etc complete all as specified and as directed by Engineer-in-charge

M&L for Construction of brick masonary valve pit of size 100cmx100cmx100cm (internal dimensions of chamber) depth to be reconed from the top of PCC in foundation to top of MS cover with MS sheet cover 3.15mm thick including frame of angle iron 40x40x6mm with locking arrangement including painting two coats of black synthetic enamel paint over a coat of red oxide primer etc including brick work in CM 1:6 15mm thick plastering in CM 1:4 (internal & external) and necessary excavation and earth work in any type of soil, returning, filling in disposal of surplus spoil to a distance not exe 50 mtrs 150mm thick PCC 1:4:8 type D-2 for base and PCC copping 15mm thick 1:2:4 using 12mm graded aggregate all as specified and as directed by Engineer-in-charge) for upto 250mm dia valve)

Supply & fixing in replacement of 100mm foot valve complete all as specified and as directed by Engineer-in-charge.

Supply & fix GI fittings reducers,tee,elbow,socket,nipple,plug,reducer socket,reducer elbow and other connected accessories of size 15 mm to 40 mm complete all as specified and directed by engr in charge.

Dismantling & taking out open well submersible pump sets installed at water storage tank of fountains, pumphouse and booster pump sumps of capacity 2 to 15 HP after disconnecting all electrical connections and refixing the same in its original position after carrying out repairs / rewinding over hauling cleaning of impellers strainers including reconnection of all electrical connections etc complete all as specified and as directed by Engineer-in-charge. Note : - Repairs carried out / parts replaced shall be paid seperately under relevent items of Sch 'A'.

M&L for transportation of open well centrifugal type submersible pump set of capacity 10.0 HP to 15 HP to local work shop and rewinding the motor with equivalent gauge of insulated copper winding wire & insulating materials i.e. PVC sleeves insulation papers wooden stick 'O' ring complete. Note ( other spares required for motor will be measuerd and paid under relevant item ) all as specified and as directed by Engineer-in-charge.

M&L for transportation of open well centrifugal type submersible pump set of capacity 5 HP to 7.5 HP to local work shop and rewinding the motor with equivalent gauge of insulated copper winding wire & insulating materials i.e. PVC sleeves insulation papers wooden stick 'O' ring complete. Note :-( other spares required for motor will be measuerd and paid under relevant item of Sch 'A' ) complete all as specified and directed by Engineer-in-charge.

M&L for transportation of open well centrifugal type submersible pump set of capacity 2.0 to 4.0 HP to local work shop and rewinding the motor with equivalent gauge of insulated copper winding wire & insulating materials i.e. PVC sleeves insulation papers wooden stick 'O' ring complete. Note :-( other spares required for motor will be measuerd and paid under relevant item of Sch 'A' ) all as specified and as directed by Engineer-in-charge.

S&F in replacement of SS coupling for 5 HP to 7.5 HP submersible pump set complete all as specified and as directed by Engineer-in-charge

S&F in replacement of gland suitable for 5 HP to 7.5 HP submersible pump complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of casing ring suitable for 5 HP to 7.5 HP complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of shaft sleevesof existing material for 5 HP to 7.5 HP complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of wear ring suitable for capacity 5 HP to 7.5 HP complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of mechanical seal suitable for 5 HP to 7.5 HP complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of gaskets suitable for 5 HP to 7.5 HP complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of impeller for existing material suitable for 5 HP to 7.5 HP complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of SS coupling up to 10 HP to 15 HP submersible pump set complete all as specified and as directed by Engineer-in-charge

S&F in replacement of gland suitable for 10 HP to 15 HP submersible pump complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of casing ring suitable for 10 HP to 15 HP complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of shaft sleevesof existing material for 10 HP to 15 HP complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of wear ring suitable for capacity 10 HP to 15 HP complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of mechanical seal suitable for 10 HP to 15 HP complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of gaskets suitable for 10 HP to 15 HP complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of impeller of existing material suitable for 10 HP to 15 HP complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of SS coupling suitable for 2 HP to 4.0 HP submersible pump set complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of gland suitable for 2 HP to 4 HP submersible pump complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of casing ring suitable for 2 HP to 4 HP complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of shaft sleeves of existing material for 2 HP to 4 HP complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of wear ring suitable for capacity 2 HP to 4 HP complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of mechanical seal suitable for 2 HP to 4 HP complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of gaskets suitable for 2 HP to 4 HP complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of impeller of existing material suitable for 2 HP to 4 HP complete all as specified and as directed by Engineer-in-charge.

S&F in replacement gun metal bush bearing of any number/Model suitable for 5 HP to 15 HP open well submersible pump. Note:- (Bearing make shall be of SKF/NBC)

S&F in replacement gun metal bush bearing of any number/Model suitable for 2 TO 4 HP open well submersible pump. Note (Bearing make shall be of SKF/NBC)

Dismantling of water fountain ring made out of MS / GI pipe of 40 to 80mm dia and refixing the same in its original position after cleaning / repairing like welding work etc complete all as specified and directed by Engineer-in-charge

Dismantling of Blocked nozzles fixed on various fountain and refixing after cleaning / servicing and setting by trial and error complete all as specified and as directed by Engineer-in-charge

S&F in replacement fountain nozzle (adjustable) of size 12mm brass Model FNCF-12B complete all as specified and as directed by Engineer-in-charge.

S&F in replacement fountain nozzle (adjustable) of size 15mm brass complete all as specified and as directed by Engineer-in-charge.

S&F in replacement fountain nozzle (adjustable) of size 20mm brass complete all as specified and as directed by Engineer-in-charge.

S&F in replacement fountain nozzle (adjustable) of size 25mm brass complete all as specified and as directed by Engineer-in-charge.

S&F in replacement dandelion fountain nozzle (adjustable) brass as per existing size and model complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of Porcelain 2 pin holder complete all as specified and as directed by Engineer-in-charge.

Dismantling of 12mm dandelion aluminium tubes and nozzles etc cleaning of tubes & nozzles and necessary repairs in the tubes / nozzles by carrying to civil workshop and refixing and setting by trial and error complete all as specified and as directed by Engineer-in-charge

S&F in replacement of Rubber packing ring suitable for under water light fittings complete all as specified and as directed by Engineer-in-charge

Supply & fixing in replacement wire netting of stainless steel wire 1.4mm dia size of mesh 12mm fixed to bend pipe dia 100mm to 200mm fixed with GI clamp including nuts and bolts etc complete all as specified and directed by Engineer-in-charge

S&F in replacement of constant voltage driver of capacity 10 amps 12 Volt complete all as specified and as directed by Engineer-in-charge. Make : The Fountainers or Equivalent.

S&F in replacement of constant voltage driver of capacity 15 amps 24 Volt complete all as specified and as directed by Engineer-in-charge. Make :- The Fountainers or Equivalent.

M&L in replacement water proof joints for cable size 2.5/4/6 sqmm complete all as specified and as directed by Engineer-in-charge

S&F in replacement of angle adjustable stand for luminaries made of SS-304 materials as per Sample for fountains complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of Fountain light fitting 12 V 100 watts suitable for existing make complete all as specified and as directed by Engineer-in-charge.

S&F in Replacement fountain light fitting 24 volt LED type 3 watt model F 21 of make Fountainer (any colour) complete all as specified and as directed by Engineer-in-charge.

S&F in Replacement fountain light fitting 24 volt multicolour 3W (7 colours) as per existing make & model complete all as specified and as directed by Engineer-in-charge.

M & L for scrapping of old painting from complete fountain assembly made of MS / GI / Steel pipe and applying two coats of approved synthetic enamelled paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-charge

Dismantling of pressure pump set of Cap 0.5 HP to 1.0 HP from the existing site after disconnecting all electrical connections and refixing the same after carrying out repairs / rewinding of motor / overhauling of pump including transportation to local work shop & back complete all as specified and as directed by Engineer-in-charge. Note : - Spare parts replaced shall be paid seperately under relevant items of Sch 'A'.

S&F in replacement of Air Tank for pressure pump set of capacity 0.5 HP 1.0 HP complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of Pressure gauge 0-10 Kg / SqCM Make Danfos or equivalent complete all as specified and as directed by Engineer-in-charge.

S&F in repair pressure control switch suitable for 0.5 HP pressure pump set Make : YAODA / RELI POWER

S&F in replacement gun metal non return valve of size 15mm bore complete all as specified and as directed by Engineer-in-charge. Make : Sant complete or equivalent

S&F in replacement gun metal non return valve of size 20mm bore complete all as specified and as directed by Engineer-in-charge. Make- Sant complete or equivalent

S&F in replacement gun metal non return valve of size 25mm bore complete all as specified and as directed by Engineer-in-charge. Make- Sant complete or equivalent

S&F in replacement gun metal non return valve of size 40mm bore complete all as specified and as directed by Engineer-in-charge. Make- Sant complete or equivalent

S&F in replacement gun metal non return valve of size 50mm bore complete all as specified and as directed by Engineer-in-charge. Make- Sant complete or equivalent

Repairs to fire hose cabinet including replacement of unserviceable broken glass, aluminium tower bolts door steples locks wooden pieces hold fastners connect work and painting to fire hose cabinet and writing necessary information of Hydrant including cement work as required at site complete all as specified and as directed by Engineer-in-charge

S&F in replacement of fire hydrant valve single headed of size 63mm bore complete all as specified and as directed by Engineer-in-charge. Make- Sant complete or equivalent

S&F in replacement of hose real drum 30m complete along with brass adopter for fixing in hydrant valve complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of RRL hose pipe 15m long complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of RRL hose pipe 30m long complete all as specified and as directed by Engineer-in-charge.

M&L for rewinding of Booster Pump set motor of capacity 2 HP to 3 HP with same gauge of super enamelled copper winding wire after cutting the burnt windings cleaning slots including insulating materials PVC sleeves insulation paper wooden stick etc complete all as specified and as directed by Engineer-in-charge

M&L for rewinding of Booster Pump set motor of capacity 4 HP to 5 HP with same gauge of super enamelled copper winding wire after cutting the burnt windings cleaning slots including insulating materials PVC sleeves insulation paper wooden stick etc complete all as specified and as directed by Engineer-in-charge

Dismantling & taking out defective parts of booster pump set of capacity 0.5 HP to 1.5 HP and refixed after repairs / making complete serviceable by repairing / replacement of defective parts including tranportation to local work shop etc complete all as specified and directed by Engineer-in-charge. Note : - Parts replaced if any shall be paid under relevent items of the schedule 'A'.

M&L for rewinding of Booster Pump set of capacity 0.5 Hp to 1.5 HPwith same gauge of super enamelled copper winding wire after cutting the burnt windings cleaning slots including insulating materials PVC sleeves insulation paper wooden stick etc complete all as specified and as directed by Engineer-in-charge

S&F in replacement od Running Capacitor 10.0 MFD complete all as specified and as directed by Engineer-in-charge.

S&F in replacement od Running Capacitor 25.0 MFD complete all as specified and as directed by Engineer-in-charge.

S&F in replacement od Running Capacitor 36.0 MFD complete all as specified and as directed by Engineer-in-charge.

S&F in replacement od Running Capacitor 50.0 MFD complete all as specified and as directed by Engineer-in-charge.

S&F in replacement od Running Capacitor 72.0 MFD complete all as specified and as directed by Engineer-in-charge.

S&F in replacement od Running Capacitor 125.0 MFD complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of ball bearing for 0.5 HP to 1.5 HP complete all as specified and as directed by Engineer-in-charge.

S&F in Replacement CI Impeller Assy of Centrifugal mono block Pump set of capacity 0.5 HP to 1.5 HP as per sample (size varies depend upon the make and cap) complete all as specified and as directed by Engineer-in-charge.

Supply and fix in replacement Decrin dozing pump Model No 96NG Q 51 , 100 PSI 40 GPD Capacity of make DECLIBAC or equivalent complete all as specified and as directed by Engineer-in-charge.

Supply and fix in replacement FRP TANK of Capacity 100 LTR with level gauge with agitator Motor ,connection shaft and mixing blade complete all as specified and as directed by Engineer-in-charge.

Supply and fix in replacement Electric motor Single phase 50 HZ 1/8 HP assy Suitable to mount on decrin mixing tank along with agitator shaft and blade complete all as specified and as directed by Engineer-in-charge.

Supply in replacement of connection pipe ( 2 Mtr long 8 mm internal dia) suitable for connecting to decrin dosing pump to Header complete all as specified and as directed by Engineer-in-charge.

Supply and fix in replacement of circuit of speed of Dozing pump complete all as specified and as directed by Engineer-in-charge.

Supply and fix in replacement of injector Nozzle of Decrin dozing pump complete all as specified and as directed by Engineer-in-charge.

Supply and fix in replacement of Regulator Knob of dozing pump complete all as specified and as directed by Engineer-in-charge.

Supply and fix in replacement of power cord of dozing pump 2 mtr long plug top 5 AMP 240 volt AC complete all as specified and as directed by Engineer-in-charge.

Supply and fix in replacement of PVC pipe 25mm dia complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of Phase sequence corrector suitable for 5 HP to 7.5 HP pump complete Make- Universal / Photron complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of Phase sequence corrector suitable for 10 HP to 15 HP pump complete Make- Universal / Photron complete all as specified and as directed by Engineer-in-charge.

M&L for cleaning / maintenance of fountain, water body complete with cleaning solutions removing all the sludge /foreign particles complete all as specified and as directed by Engineer-in-charge

S&F in replacement of DOL starter for 5 HP to 7.5 HP with relay 13-22 Amp complete all as specified and as directed by Engineer-in-charge. Make : - L&T / HAVELLS

Supply and fix in replacement electronic timer ET-100 240/415 complete all as specified and as directed by Engineer-in-charge. Make :- L&T / Havells / GEC

Supply and fix in replacement amp meter 96 Sqmm digital type 0-100 amps. Make- AE / EE / NUTRONICS (DPS)

Supply and fix in replacement volt meter 0-500 volts 96 sqmm digital type. Make :- AE / EE / NUTRONICS (DPS)

S&F in replacement of dial type FM-1 / QT daily timer one day 24 hrs 240 volt AC complete all as specified and as directed by Engineer-in-charge. Make :- L&T or equivalent

S&F in repair CT 30/5 to 200/5 complete all as specified and as directed by Engineer-in-charge. Make- AE / EE/NUTRONICS (DPS)

S&F in repair indicating light with bulb set of three complete all as specified and as directed by Engineer-in-charge.

S&F in repair PVC copper stranded conductor cable size 1.5 Sqmm multi stranded single core 1100 volt grade complete all as specified and as directed by Engineer-in-charge. Make :- Kalinga / Finolex / Plaza

S&F in repair PVC copper stranded conductor cable size 2.5 Sqmm multi stranded single core 1100 volt grade complete all as specified and as directed by Engineer-in-charge. Make :- Kalinga / Finolex / Plaza

S&F in repair PVC copper stranded conductor cable size 4 Sqmm multi stranded single core 1100 volt grade complete all as specified and as directed by Engineer-in-charge. Make :- Kalinga / Finolex / Plaza

S&F in repair PVC copper stranded conductor cable size 6 Sqmm multi stranded single core 1100 volt grade. Make :- Kalinga / Finolex / Plaza

S&F in repair PVC copper stranded conductor cable size 10 Sqmm multi stranded single core 1100 volt grade complete all as specified and as directed by Engineer-in-charge. Make :- Kalinga / Finolex / Plaza

S&F in repair PVC copper stranded conductor cable size 16 Sqmm multi stranded single core 1100 volt grade complete all as specified and as directed by Engineer-in-charge. Make :- Kalinga / Finolex / Plaza

S&F in repair PVC flat sheathed submersible cable copper conductor of size 2.5 sqmm 3 core,1100 volt grade complete all as specified and as directed by Engineer-in-charge. Make :- Kalinga / Finolex / Plaza

S&F in repair PVC flat sheathed submersible cable copper conductor of size 4.0 sqmm 3 core,1100 volt grade complete all as specified and as directed by Engineer-in-charge. Make :- Kalinga / Finolex / Plaza

S&F in repair PVC flat sheathed submersible cable copper conductor of size 6.0 sqmm 3 core,1100 volt grade complete all as specified and as directed by Engineer-in-charge. Make :- Kalinga / Finolex / Plaza

S&F in repair PVC flat sheathed submersible cable copper conductor of size 10.0 sqmm 3 core,1100 volt grade. Make- Kalinga / Finolex / Plaza

Disconnecting and removing unserviceable under ground cable 1100 volts grade from trenches / poles / walls / floors etc of size 50 sqmm 3.5 core complete all as specified and as directed by Engineer-in-charge.

All as per Item No 170 but of size 185 sqmm 3.5 core complete all as specified and as directed by Engineer-in-charge.

Supplying, spreading and compacting approved river sand intrenches for cable cushioning at bottom and top of cable complete all as specified and as directed by Engineer-in-charge

Supply & lay burnt bricks sub class 'B' of old size laid dry in trenches as protection to cable all as specified and directed by Engineer-in-charge

Supply & laying of PVC insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade laid in trenches / poles / on walls etc of size 50 sqmm 3.5 core complete all as specified and as directed by Engineer-in-charge.

Supply & laying of PVC insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade laid in trenches / poles / on walls etc of size 185 sqmm 3.5 core complete all as specified and as directed by Engineer-in-charge.

Supply & laying GI pipe light grade 50mm dia on poles / on walls / floor etc including S&F MS clamps made of 40mmx3mm iron strip complete all as specified and as directed by Engineer-in-charge.

S&F single phase preventor type VSP-D2 415 volts AC complete all as specified and as directed by Engineer-in-charge. Make :- Minilec or equivalent

Dismantling & taking out defective part of centrifugal pump set coupled with 40 HP to 50 HP motor and refixed after making it complete serviceable by repairing/replacement complete all as specified and as directed by Engineer-in-charge. Note :- Parts to be replaced under this item shall be paid as supply only under respective items of Sch 'A' of BOQ.

Supply only shaft of existing material suitable for 30 to 50 HP motor complete all as specified and as directed by Engineer-in-charge.

Supply only impeller of existing material suitable for 30 to 50 HP motor complete all as specified and as directed by Engineer-in-charge.

Supply only shaft sleeve of existing material suitable for 30 to 50 HP complete all as specified and as directed by Engineer-in-charge.

Supply only drive end Bearing No 6313 complete all as specified and as directed by Engineer-in-charge.

Supply only Cast iron bearing housing for 30 to 50 HP motor complete all as specified and as directed by Engineer-in-charge.

Supply only Gland assembly suitable for 30 to 50 HP motor complete all as specified and as directed by Engineer-in-charge.

Supply only throat bush suitable for 30 to 50 HP motor complete all as specified and as directed by Engineer-in-charge.

Supply only mechanical seal suitable for 30 to 50 HP motor complete all as specified and as directed by Engineer-in-charge.

Supply only rotor body suitable for 30 to 50 HP complete all as specified and directed by Engineer-in-charge

Supply only shaft coupling suitable for 30 to 50 HP pump set complete all as specified and as directed by Engineer-in-charge.

Supply only ball bearing of size 3309 complete all as specified and directed by Engineer-in-Charge. Make :- SKF / NBC

Supply only ball bearing of size 6309 complete all as specified and directed by Engineer-in-Charge. Make :- SKF / NBC

Supply only roller ball bearing of size 21309 complete all as specified and directed by Engineer-in-Charge. Make - SKF / NBC

Supply only ball bearing of size 6305 complete all as specified and directed by Engineer-in-Charge. Make :- SKF / NBC

Supply only ball bearing of size 6211 complete all as specified and directed by Engineer-in-Charge. Make :- SKF / NBC

S&F in repair cooling fan for 40 to 50 HP induction motor of make and type as approved by Engineer-in-charge

S&F in repair cooling fan for 30 to 40 HP induction motor of any make and type.

Disconnecting & dismantling of pump set from the foundation breaking the existing defective PCC foundation in any size, shape refix with for PCC 1:2:4 type B-2 using 12.5 mm graded aggregate for foundation of any size of motor pump set from 50 HP to 75 HP capacity pump set and fitting pumping set in position with base frame painted with synthetic enamel black paint complete all as specified and as directed by Engineer-in-charge

Supply only Water based chlorine (granules) calcium hypo chloride grade-I as per IS-11673/86 with comprissing the following specifications :- (a) Clear liquid with straw yellow colour (b) Minimum PH Value range 6 to 8 (c) Freezing point 1-4 degree F (d) Fresh alkaline Na2 Co3 GPL (min) (e) Date of packing & expiry date mentioned on packing Jar / Cane (f) 90% GPL (g) Packing in 50 and above kg PVC Jar / Cane and selaed packing Jar / Cane shall be accepted by the Engineer-in-charge and proper record of consumption of material to be maintain.

Supply & fix in repair MCB TP pole 415 volt AC of capacity 63 amps complete all as specified and as directed by Engineer-in-charge. Make- Havells / L&T/ Schiender.

All as per above item No 198 here-in-before but cap 32 amps complete all as specified and as directed by Engineer-in-charge.

Supply & fix in replacement of MCCB 200 amps 4/3 pole 35 KA 415 volts 50 HZ in LT control panel complete all as specified and as directed by Engineer-in-charge. Make :- Schneider / L&T / Havells .

Supply & fix in replacement of MCCB 100 amps 4/3 pole 25 KA 415 volts 50 HZ in LT control panel complete all as specified and as directed by Engineer-in-charge. Make :- Schneider / L&T / Havells

Supply & fix in replacement of MCCB160 amps 4/3 pole 25 KA 415 volts 50 HZ in LT control panel complete all as specified and as directed by Engineer-in-charge. Make :- Schneider / L&T / Havells

Supply & fix in replacement of MCCB 63 amps 4/3 pole 25 KA 415 volts 50 HZ in LT control panel complete all as specified and as directed by Engineer-in-charge. Make :- Schneider / L&T / Havells

Supply & fix in replacement of MCCB 400 amps 4 pole 35 KA 415 volts 50 HZ in LT control panel complete all as specified and as directed by Engineer-in-charge. Make :- Schneider / L&T / Havells

S&F in replacement of MCCB 250 amps 4/3 pole 35 KA 415 volts 50 HZ in LT control panel complete all as specified and as directed by Engineer-in-charge. Make :- Schneider / L&T / Havells

S&F in replacement of 3 pole power contactor with NO / NC block suitable for MNX 50 to 110 complete all as specified and as directed by Engineer-in-charge. Make :- L&T / Havells /Standard

S&F in replacement of 3 pole power contactor with NO / NC block suitable for MNX 40 to 45 complete all as specified and as directed by Engineer-in-charge. Make :- L&T / Havells/ STANDARD

S&F in replacement of 3 pole power contactor with NO / NC block suitable for MNX 25 to 32 complete all as specified and as directed by Engineer-in-charge. Make- L&T / Havells / STANDARD

S&F in replacement of 3 pole power contactor with NO / NC block suitable for MNX upto 18 complete all as specified and as directed by Engineer-in-charge. Make :- L&T / Havells / STANDARD

Dismantling of 3 phase electric induction motor of any make and type and removing the old burnt copper winding wire from 25 /30 HP motor and rewinding with existing gauge of super enamelled copper winding wire including refixing in its original position and testing complete all as specified and as directed by Engineer-in-charge

All as per item No 210 here-in-before but cap of motor 50 HP complete all as specified and as directed by Engineer-in-charge.

S&F ball bearing 6312 complete all as specified and as directed by Engineer-in-charge. Make - SKF / NBC

S&F ball bearing 6313 complete all as specified and as directed by Engineer-in-charge. Make :- SKF/ NBC

S&F roller bearing No NU-314C complete all as specified and as directed by Engineer-in-charge. Make :- SKF / NBC

M&L for GI clamps of 32mmx5mm complete with screw 50mm long x 6mm dia complete with drilling the hole with drilling machine with rawl plugs / wooden gutties for fixing / clamping the GI pipes suitable for 50/40mm dia at a interval 01 mtr each complete by providing necessary scafolding upto the height of 15 mtrs complete all as specified and directed by Engineer-in-charge

Material and labour for scrubbing out the rust deposited on the surface of centrifugal pump set including its base frame and preparing for applying paint and apply one coat of redoxide primer and two coats of synthetic enamel paint and marking SM /MES Number as directed. capacity of pump set 50 to75 HP

Material and labour for scrubbing out the rust deposited on the surface of centrifugal pump set including its base frame and preparing for applying paint and apply one coat of redoxide primer and two coat of synthetic enamel paint and marking SM /MES Number as directed. capacity of pump set 5 to 20 HP complete all as specified and as directed by Engineer-in-charge.

Supply and fix in replacement on load change over switch 4 pole 400 amps 440 volts open Execution type complete all as specified and as directed by Engineer-in-charge. Make : Havells / L&T/ STANDARD

Supply and fix in replacement fully automatic star delta starter ML series with sheet metal enclosure suitable for 50 HP 3 phase 415 volts over load relay range 65-100 amps complete all as specified and as directed by Engineer-in-charge. Make : Havells / L&T/ STANDARD

Supply and fix in replacement fully automatic star delta starter ML series with sheet metal enclosure suitable for 10- 15 HP 3 phase 415 volts over load relay range 45-65 amps complete all as specified and as directed by Engineer-in-charge. Make : Havells / L&T/ STANDARD

Supply and fix in replacement Motor Guard( weather protection cover) made out of 22 gauge GI Sheet suitable for 2 to 3 HP centrifugal mono block pump set with lifting handle and provision of suction /dicharge pipeline Holes complete all as directed by Engr-in-Charge.

Supply and fix in replacement PVC water tank cylendrical shape 3 layer of capacity 5000 LTRS complete all as specified and as directed by Engineer-in-charge. MAKE : SINTEX / RAINO/ ROTEX

Supply and fix in replacement PVC water tank cylendrical shape 3 layer of capacity 2000 LTRS complete all as specified and directed by Engr-in-Charge. MAKE : SINTEX / RAINO/ ROTEX

Supply and fix in replacement PVC water tank cylendrical shape 3 layer of capacity 1000 LTRS complete all as specified and as directed by Engineer-in-charge. MAKE : SINTEX / RAINO/ ROTEX

M&L in replacement of Ladder for OHT/ UG sump with square bar,angle iron,channel, Flat Iron and etc welding, drilling, cutting with one primer coat, one under coat and one finishing coat of paint complete all as specified and directed by Engineer in charge.

M&L in replacement of unserviceable / burnt pressure pump set of capacity 0.5 HP to 0.75 HP complete including necessary cutting of GI pipe inserting tee and connection complete all as specified and as directed by Engineer-in-cjharge. Make :-kirloskar or equivalent

M&L in replacement of unserviceable / burnt pressure pump set of capacity 1.0 HP complete including necessary cutting of GI pipe inserting tee and connection all as specified and as directed by Engineer-in-cjharge. Make :- kirloskar or equivalent

Supply & fix Electronic overload relay (Manual reset) relay range 24-40 amp suitable for direct mounting. Make :- L&T / HAVELLS/ STANDARD

Supply & fix Electronic overload relay (Manual reset) relay range 45-75amp suitable for direct mounting complete all as specified and as directed by Engineer-in-charge. Make :- L&T / HAVELLS/ STANDARD

Supply & fix Electronic overload relay (Manual reset) relay range 66-110 amp suitable for direct mountimg complete all as specified and as directed by Engineer-in-charge. Make :- L&T / HAVELLS/ STANDARD

Supply & fixing in replacement of self priming recirculation pump set of capacity 4.5 HP / 4.08 KW- RPM-3000 RPM, Head-14 Mtrs induction motor type for swimming pool as per existing make and model complete all as specified and as directed by Engineer-in-charge

S&F in replacement pressure gauge analong type 4" dia 0-14 Kg rating complete all as specified and as directed by Engineer-in-Charge.

M&L in repair to fountain lights of any make and model complete all as specified and as directed by Engineer-in-Charge.

Supply & fix in repair monoblock pump single phase 2/3 HP capacity 240Volts, 50 Hz AC including fitting in given location with GI fittings and electrical connections with control wire complete all as specified and directed by Engineer -in- Charge.

Supply & fix in repair Submersible pump horizontal single phase 2/3 HP capacity 240Volts, 50 Hz AC including fitting in given location with GI fittings and electrical connections with control wire complete all as specified and directed by Engineer -in- Charge.

Supply & fix in repair Submersible pump single phase 5 HP capacity 240Volts, 50 Hz AC including fitting in given location with GI fittings and electrical connections with control wire complete all as specified and directed by Engineer -in- Charge.

Disconnecting and taking out of existing submersible pump set capacity 4 to 12.5 HP alongwith their column pipe and submersible cable from bore well from any depth complete all as specified and directed by Engineer-in-charge

M&L for development of borewell by means of high capacity compressor, compressor capacity not less than 620 CFM at 8 Kg/cm square to its optimum yeild till clear water of potable quality free from sand/silt is obtained including draw down performance and yeild test of the tubewells complete all as specified and directed by Engr- In- Charge.

Servicing of submersible motor pump set of cap 5 HP to 12.5 HP including replacement of thrust plate and filling of distilled water and making it water tight complete all as specified and as directed by Engineer-in-charge

Shifting to local work shop and Rewinding of submersible motor after cutting the burnt winding including cleaning slots and rewinding with equivilent gauge (as retrieved) of copper winding wire and insulating material I.e PVC sleeves insulation paper , wooden sticks, 'O' ring for 5 HP to 12.5 HP complete all as specified and as directed by Engineer-in-charge

S&F in repairs GI column pipe 50mm dia heavy duty class 'C' with GI flanged and drilled at both ends duly threaded and welded of 3 mtr long alongwith cut for passing the submersible cable including bolts, nuts, washers and rubber insertions packing complete all as specified and directed by Engineer-in-charge.

S&F in repair GI column pipe 80mm dia heavy duty class 'C' with GI flanged and drilled at both ends duly threaded and welded of 3 mtr long alongwith cut for passing the submersible cable including bolts, nuts, washers and rubber insertions packing complete all as specified and directed by Engineer-in-charge.

S&F in repair PVC insulated and sheathed submersible cable flat three core conductor cable size 2.5 sqmm 1100 volts grade conforming to IS-694/1990 complete all as specified and directed by Engineer-in-charge

S&F in repair PVC insulated and sheathed submersible cable flat three core copper conductor cable size 4.0 sqmm 1100 volts grade conforming to IS-694/1990 complete all as specified and directed by Engineer-in-charge

M&L for lowering the submersible pump set complete with motor and pump capacity 4 to 12.5 HP in bore well and connecting to existing system complete all as specified and as directed by Engineer-in-charge

S&F clamps fabricated out of 80mmx6mm thick MS flat for 50mm bore column pipe alongwith bolts nuts and washers complete all as specified and directed by Engineer-in-charge

S&F clamps fabricated out of 100mmx6mm MS flat for 80mm bore column pipe alongwith bolts nuts and washers complete all as specified and directed by Engineer-in-charge

S&F bore well cover fabricated out of 6mm thick MS plate including MS bolts nuts and washers suitable for 6" to 12" inch dia bore complete all as specified and directed by Engineer-in-charge

Dismantling & taking out defective part of centrifugal pump set coupled with 60 HP to 75 HP motor and refixed after making it complete serviceable by repairing/replacement complete all as specified and as directed by Engineer-in-charge.Note :- Parts to be replaced under this item shall be paid as supply only under respective items of Sch 'A'.

Supply only shaft of existing material suitable for 60 to 75 HP motor

Supply only impeller of existing material suitable for 60 to 75 HP motor

Supply only shaft sleeve of existing material suitable for 60 to 75 HP

Drive end Bearing No 6313 60 to 75 HP

Supply only Cast iron bearing housing for 60 to 75 HP motor

Supply only Gland assembly suitable for 60 to 75 HP motor

Supply only throat bush suitable for 60 to 75 HP motor

Supply only mechanical seal suitable for 60 to 75 HP motor

Supply only rotor body suitable for 60 to 75 HP complete all as specified and directed by Engineer-in-charge

Supply only shaft coupling suitable for 60 to 75 HP pump set

M&L for grass cutting by using grass cutting machine and required tools at pump house and other water supply installation after cutting grass taking out from existing position and depositing to given location including required petrol etc all as specified and directed by Engr-in-Charge

Supply and fix in replacement PVC water tank cylendrical shape 3 layer of capacity 500 LTRS MAKE SINTEX/ ROTEX/ RAINO

M&L in replacement of booster pump protection gaurd made out of MS sheet including cutting/welding for required shape after made out fixing with proper nut bolt and securing on booster pump complete all as specified and directed by Engr-in-Charge.

S & F in replacement of digital soft starter suaitable for 15 HP submersible pump removing existing un serviceable starter and fixing new with propper electrical connection including additional wiring etc complete all as specified and directed by Engr-in-charge. Make: L & T , cat part No : CSXI-015-41 or equivalent of Havells/C&S

M&L in replacement of Notice board 4 feet by 3 feet using half mm thick foam sheet including writing of particular deatils of E/M installations and shall be print in blue color only and letters are white color minimum 50 leters and maximum 70 leters and fixing with revit r screw including taking down old existing board from site , before make a board demo copy shall be collect with details. complete all as specified and directed by Engr-in-charge.

Supply and fixing, installation in replacement of UV based water purifiers double purification by UF+UV+TDS+RO controller computer controlled operation, filter change alarm, UV fail alarm with purified water storage , storage capacity 7Ltr Hydrostatic tank and purification capacity 15 Ltr/hr fixing on wall with proper screewing and connected pipe line to water cooler necessary required pipe line up to 2 mtr shall be included with water purifier rate complete all as specified and directed by Engr-in-charge Make : Kent Model : Kent / Aqua/ Pure-it Gaurd.

S&F in replacement PVC tank cover (Make Sintex/ Raino/ Rotex) suitable for service over head tank including necessary fixing arrangements of following capacity (a) 500/750/1000 Ltr capacity

(b) 1500/2000 Ltr capacity Notes for all above items :- water supply is essential services, Hence contractor should be rectify the given complaints/ deffects within 8 hours in same day. Contractor will provide well experienced and well conversed man power including Sunday and holidays in case required for major breakdown adequate labour shall be provide timley. (a) The plumber should have minimum 4 years experience in the relevant trade. (b) All T&P required for repair work shall be provided by contractor at own arrangement to trade man and helpers. (c) All complaints should be attended with in 8 Hours. (d) Penalty charges for non attendind complaints within 8 hours shall be charged Rs 1000/- per complaints , (e) The cost of man power shall be deemed to be included in the unit rate. (f) Contractor shall be submitted attendence register to concerned JE for man power and should be report to JE E/M at 9.30 am every day to obtaining complaints. (g) Penelty charges Rs 1000/- per person in case absence of man power recovery shall be made in every bill

M/S Hind Constructions

J.P. Enterprises

New Era Engineers

sheetal engineering