ED/01/PANDG/26-27/02

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m CPWD Vol-I P-92 It-2.8.1

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. CPWD Vol-I P-95 It-2.27

Dry brick pitching half brick thick in drains including supply of bricks and preparing the surface complete :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 CPWD Vol-II P-301 It-16.12.1

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.16.91.2 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern. CPWD Vol-II P-317 It-16.91.2

1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) CPWD Vol-I P-158 It-4.1.3

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). CPWD Vol-I P-108 It-4.2.2

Centering and shuttering including strutting, propping etc. and removal of form work for :Foundations, footings, bases for columns CPWD Vol-I P-109 It-4.3.1 CPWD Vol-I P-109 It-4.3.1

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. CPWD Vol-I P-127 It-5.22A.6

In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works CPWD Vol-II P-769 It-1.25.2

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work CPWD Vol-II P-264 It-13.61.1