Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹37.8 LAccepted-AOC 129 PANCH SHEEL VENUE DEEP NAGAR JALANDHAR CANTT PB | JALANDHAR | PUNJAB | 144001 | L-1 | Accepted-AOC Being L-1 | |
| 2 | L-2₹40.3 L+₹2.6 L (6.82%)Rejected-Finance | L-2 | Rejected-Finance other than L-1 | |
| 3 | L-3₹43.9 L+₹6.2 L (16.3%)Rejected-Finance | L-3 | Rejected-Finance other than L-1 | |
| 4 | L-4₹47.3 L+₹9.5 L (25.2%)Rejected-Finance | L-4 | Rejected-Finance other than L-1 |
Tender Value
₹37.7 L
EMD Value
₹75,340
Closing Date
30 Dec 2021, 6:00 pmClosed
Sh A K Dubey IDSE SE CWE
Military Engineer Services, Commander Works Engineer, Udhampur, PO - Garhi, Udhampur-182121
SPL REPAIR TO INTERNAL ROADS OF 5171 ASC BN (MT) UNDER GE (NORTH) UDHAMPUR
2021_MES_491810_1
CA NO CWE/U(N)-80/2021-22
Open Tender
Civil Works
Item Rate
180 days
UDHAMPUR
AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE NORTH UDHAMPUR
₹75,340
Yes
25 Jan 2022
1 Dec 2021
1 Jan 2022
1 Dec 2021
30 Dec 2021
18 Dec 2021
Amount
Repair to pot holes any depth, not exc 1 sqm each including sweeping free from dirt and mud of water sunken surface in roads, paths etc. cutting around edges to at least 25mm in depth making good by appling tack coat on bituminous surface with cationic bitumen emulsion RS-1 grade conforming to IS:8887 @ 5 Kg per Ten Square Metre, putting in Pre-mixed bituminous macadam, well rammed and sealed with binder 9.8 Kg per 10 Sqm, binded with 0.09 Cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of pot holes exc 30 mm complete, all as specified and as directed by the Engr-in-Charge.
Preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surfaces with compressed air to remove all loose dirt etc., and applying evenly a priming / tack coat on existing black top surfaces with cationic bitumen emulsion RS-1 grade conforming to IS:8887 @ 2.5 Kg per Ten Square Metre and including Bituminous premix asphaltic semi dense concrete (Design Mix) 30mm consolidated thickness with 5.5% paving bitumen using bitumen VG-30 paving grade ( 50 -70 penetration) binder content by weight of total mix rolled and compacted to required camber and gradient, complete, all as specified and as directed by the Engineer-in-Charge.
Premix bituminous macadam with 4% paving using bitumen VG-30 paving grade ( 50 -70 penetration) bitumen binder, laid/rolled and compacted to required gradient and camber (consolidated thickness upto maximum 75mm), complete, all as specified and as directed by the Engineer-in-Charge.
Preparation of any type of road surfaces by scratching old spots, paints, trading oils greasy spots etc. and applying reflective Thermo Plastic road marking paint 2.00 mm thick as side, side lines, dashes, arrows, letters, stop lines etc of white/yellow approved colour of width 100mm and more as directed conforming to Ministry of surface Transaport (MORTH) specification for the road and bridge work : 4th revision, over primer as per manufacturers instructions including glass beads (intermix) type I (most/BS6008A) and provision contained in IRC-35-1997, complete all as specified and directed by GE/Engr-in-Charge. Note : Contractor shall have to furnish the detail that quantity minimum used per square meter is 5.00 Kg/Sqm.
Cat eye of size 110 mm x 120mmx20mm made of Aluminium, two reflectors fitted in the body, weight of cat eye 130 gm approx, designed for dynamic loads, fixed in repairs, complete all as specified and as directed by Engr-in-Charge.
Delineators made of ABS plastic fitted with two nos. 100 mm dia highly reflective reflectors made of PMMA on both sides of the post and mounted on mild steel pipe of 50 mm duly powder coated height 1000mm, anti rust etc including fixed in PCC block (size 30x30x30 cm) of PCC 1:2:4 Type B-I, including taking down old delineators, complete all as specified and as directed by Engr-in-Charge. Note : Cost of PCC and earth work is deemed to be included in unit cost.
Waterproof energy saving and Eco friendly DHRUV solar Road Stud made out Solid aluminium alloy shell powered by solar cells and panels . Ideal signal product for highways , parking lots , roads and similar isolated or stand alone traffic applications in repair. Note : Aluminium Alloy shell with Solar Panel mono crystalline solar 2 . 4V / 0 . 3 watt and One Ni-MH or Nicd rechargeable battery with Six super bright LEDs in Colour Yellow , red , blue , green and white , Size - 125mmx125mmX25mm with shank of 56.8mm complete all as specified.
Convex mirror of 1000mm dia, made of polycorbonate material provided with 75mm dia mild steel medium weight pipe post of 108m high, duly powder coated fixed on ground with PCC 1:2:4 type B-1 of block size 60x60x60 cm in repair including earth work & removing excavated soil to a distance not exceeding 50m, complete all as specified as directed by Engr-in-Charge.
NATIONAL ROAD BUILDERS
M/S CHOUDHARY BUILDERS
Buildwell Construction Co.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .