Providing and Supplying Furniture in Gondwana University Gadchiroli

Amount

MODULAR OFFICE TABLE (OFFICE) Modular table of size (1450mm*750m*750 mm) made out of 18 mm MR ply with laminate with two side drawer with 10 lever cam lock plus handles built in plastic and one door and CP hardware fitting and leg shall be fabricated component in 38mm x 25mm x 1.2mm thick MS ERW TUBE with finish powder coat (epoxy polyester).

Office Almirah • Manufractured by prime quality of CRCA”cold rolled close annealed” steel sheets. With locking facility Size(1981mm x 914mm x 482mm) (20 to 22 gauge)

S-TYPEchair (Office Chair) Providing and installing S-TYPE CHAIR with cushioned seat, back with const arm. 1) The seat and back shall be made from, back with wooden Moulded ply /mesh back with PP framed fixed arm and seat made up of 10 mm ply with cusion and finished with synthetic paintback. 2) The dimensions of back shall be (W) 45.7cm x (H) 39.0cm, and of seat shall be (W) 45.7cm x (D) 42.4cm. 3) The armrest tube shall be made of dia 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. M.S.E.RW. tube and powder coated. The armrest shall be shall be gas-assisted injection moulded from black Polypropylene. 4) The understructure assembly shall be a cantilever type frame made. M.S. E.RW. tube and powder coated 5) Overall Dimensions of Chair shall be Seat Height - 45.0 cm, Height - 88.0cm, Width & Depth of Chair as measured from pedestal - Width-58.0 cm and Depth-58.5 cm.

Steel book self rack Size 66” H x 33” W x 12”D • Manufractured by prime quality of CRCA”cold rolled close annealed” steel sheets. • Advanced knock-down costruction which could be assembled quickely. • Body and drawers made from 22 gauge steel sheets (0.8mm). • Drawers slide in and out with smooth channels of 0.7mm steel. • Locking facility available with aduplicate key

Sloted Angle rack Size 78” H x 36” W x 18”D Shelves : 6 Colour: Nickel

Providing and installing S-TYPE CHAIR with cushioned seat, back with const arm. 1) The seat and back shall be made from, back with wooden Moulded ply /mesh back with PP framed fixed arm and seat made up of 10 mm ply with cusion and finished with synthetic paint back. 2) The dimensions of back shall be (W) 45.7cm x (H) 39.0cm, and of seat shall be (W) 45.7cm x (D) 42.4cm. 3) The armrest tube shall be made of dia 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. M.S.E.RW. tube and powder coated. The armrest shall be shall be gas-assisted injection moulded from black Polypropylene. 4) The understructure assembly shall be a cantilever type frame made. M.S. E.RW. tube and powder coated 5) Overall Dimensions of Chair shall be Seat Height - 45.0 cm

VIP chair • Size – 710W X 740D x 1210H • High back tilt mechanism • Brown colour • Nylon star base • PP arms with soft PU pads • Twin wheel nylon casters

Hon.DirectorChair for the office • High back 560 W x 680D x 1130H • Center tilt mechanism • Twin wheel nylon casters • Wooden arm rest on chrome plated armrest • Chrome plated MS star base • Brown colour

Executive chair • High back 640W x 765D x 1170H • High back tilt mechanism • Twin wheel nylon casters • Wooden arm rest on chrome plated armrest • Chrome plated MS star base • Brown colour

AKASH FUNRITECH PVT LTD

APSARA INDUSTRIES

Bharat Cooler and Furniture

Crystal furniture Industries

Shreeji Modular Furniture