REPAIR AND RESURFACING OF ROAD NEAR OFFICERS MARRIED ACCN IN PATCHES AND ELECTRICAL WIRING INCL ELECTRICAL FITTING AND FIXTURES AT ADM REGT ETC UNDER GE I GOS

Amount

M&L for Repair to pot holes any depth, not exc 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths, etc cutting around edges to at least 25mm in depth, and making good by applying tack coat @ 5 Kgs per 10 Sqm and laying premixed bituminious macadam well rammed and sealed with paving bitumen 60/70 or VG-30 grade@ 9.8 Kgs per 10 Sqm, blinded with 0.09 Cum of stone chipping of size 6.3mm and again well rolled with 8 to 10 tonne power roller (Iincluding supply of pre-mixed macadam, binder and chipping) depth of pot holes exc 30mm complete all as specified and directed by Engineer-in-Charge.

M&L for Preparing existing black top surface or bituminous macadam surfaces by brushing with brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc on back top/concrete surfaces than applying evenly priming tack coat with paving bitumen 60/70 or VG-30 penetration over the prepared surface by mechanical sprayer @ 5 Kgs/10 Sqm of surface area complete all as specified and directed by the Engineer -in-Charge.

M&L for applying bituminous premixed semi dense asphaltic concrete 40mm thick (consolidated thickness) with 5.5% binder content of paving bitumen 60/70 or VG-30 grade by weight of total mix including cement filler, on surfaces rolled & compacted with using 8 to 10 tonne capacity power roller to achieve the required compactness, camber and gradient mixed in hot mix plant using design mix and laid by mechanical paver finisher. Complete all as specified and directed by the Engineer-in-charge. Note : Job Mix formula as per MORTH standared /IS shall be got carried out from the approved Govt accredited Lab at contractoor's cost and shall be approved by GE. Bitument contents as specified is minimum & to be incororated even Job mix formula indicates lower value. Incase of higher value, no prices adjustment is admissible and quoted rate shall be deemed inclussive.

M&L for premixed bituminous macadam laid, rolled and compacted to required gradient and camber n.exc 75mm thickness (consolidated thickness) with 4% binder content of VG -30 by weight of total mix, mixed in hot mix plant and laid by mechnical paver finished complete. Note : Job Mix formula as per MORTH standared /IS shall be got carried out from the approved Govt accredited Lab at contractoor's cost and shall be approved by GE. Bitument contents as specified is minimum & to be incororated even Job mix formula indicates lower value. Incase of higher value, no prices adjustment is admissible and quoted rate shall be deemed inclussive.

M&L for preparation of existing bituminous surfaces, removing, dust, dirt grease and other foreign matters etc to receive the marking and M&L for thermo plastic (Reflective) line marking having 1.0 mm thickness (average) of uniform surface finish conforming to BS 3262 (Part 1) 1989 read in conjunction with the MOST specification 803 clause 4.2.2 on bituminous surfaces in white/yelow clour and super imposed with glass beads confirming to BS 6088 read in conjuction with and MOST specification 803 clause 4.3.3 complete all as specified and directed. Note - MOST specification 803 shall be followed strictly for execution of work & suitable machine shall be used for the marking as approved by the GE. Shape & size/ patterns of marking shall be as approved by the GE.

S&F in repair cat eyes/road studs for roadways sign permanent surface mounted type having tough poly carbonate micro replicated corner cube reflector lenses with a protective abrssion resistant ceramor coating having body of weather proof and impect resistant thermoplasit complete as per manufacturer,s instruction and as directed. (Colour :- Yellow/Red/Amber) Make: Series 290 of 3M or Road Star or Equivalent.

S&F in repair solar cat eyes/road studs size (mm) 125L x 125B x 25H including stem height 53mm approx housing dia cast aluminium (grade LM-6) fully water proof and weather proof and weatherproof coating visible distance upto 400mtr LED-6 super bright amber led (3 Nos each side) yellow charged, flush frequency 1.2 Hz-1.8Hz including solar panel 3.5V/110MA & battery one PC sub ‘C’ type Ni-Cd rechargeable battery 1.2V/2.5AH temp range 20C to 70C fixed on road for roadway sign complete as per manufacturer’s instruction and directed by Engr-in-Charge Make- 3M/Avery Dennision/Dark Eye/Green/Greenlite/Road Star Cat Part No. GSR-909 or Equivalent.

M&L for Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exc 400 sqm & depth exc 50 mm & n exc 100 mm. Complete all as specified and directed by Engineer-in-Charge.

M&L 150 MM Soling or sub base with broken stone bouders or quarried stone rolled & consolidated to required gradient and camber complete all as specified & directed .

M&L for 150 mm thick water bound macadam in two layers of 75 mm each (compacted thickness), with coarse aggregate of stone (granite / trap/ basalt) of grading 2 (63 mm to 40 mm size) or of grading 3 (50 mm to 20 mm size), spread, rolled and consolidated to required gradient and camber required. Complete all as specified & directed.

S&F in repair plastic speed bumbs (Speed breakers) not less 400 mm wide blocks & yellow colours fixed with necessary spikes/screws to the road surface etc. Complete all as specified & directed by Engr -in - Charge.

S&F in repair ABS Body, 100 cm outdoor convex mirror good quality as approved by GE fixed in road/ground portion complete including hanging/fixing arrangement with adequate mounting arrangement at suitable height, having unbreakable Polycarbonate Convex Lens with hoods as the traffic safety mirror for eliminating blind spots & increase visibility at a broader angle, including excavation for post holes, PCC Type C-2 1:3:6 (using 40 mm graded stone aggregate) in post hole & removal of surplus excavated material to a distance not exceeding 50 metre & depositing where directed at a level not exceeding 1.5 metre above the starting point. Complete all as specified & directed. Make: Frontier 100 cm outdoor Convex Mirror, FMCO-100, Road Star, Real reflectors, Alexix, ACE polymers (India) or Equivalent.

S&F in repair high intensity prismatic retro - reflective (3m/Avery) sheet of colour as directed, self adhesive, fixed on steel/concrete surface etc all as specified and directed.

S&F in repair Alcolite Spring Post/Flexible delinator, strong flexible UV protected PU & PVC with high intensity reflective light material crystal lattice, 75 mm dia, 750 mm height including all necessary fittings. Complete all as specified & directed by Engr - in - Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for .

S & F of rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete, drilled for fixing of steel sheeting or other covering doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting and also fastening confirming to Fe – 410 – W(Gde E - 250) quality 'B' complete all as specified and directed.

M&L for two coats synthetic enamelled paint to new steel surfaces after preparation over a coat of red oxide primer area over exc 10cm in width or girth etc complete all as specified and directed.

M & L in repair 4 mm thick aluminium composite panel cladding work of choice colour incl necessary bracing for fixing to frames work or wall surface by means of reveting as directed and specified by engineer in charge

S& F in repairs 12 " stainless steel alphabets polished fixed to ACP Panels /clading work / or metal frame work (Each letter to be measured as one unit)

M&L for Machine pressed precast RCC kerb stones of grade M-30 of size 300 mm x 150 mm x 300 mm (depth) as used in road kerbs and similar articles with plain faces, set in CM 1:4 complete all as specified and directed.

M&L for Machine pressed precast RCC kerb stones of grade M-30 of size 300 mm x 150 mm x 450 mm (depth) as used in road kerbs and similar articles with plain faces, set in CM 1:4 complete all as specified and directed.

Demolition of Cement Concrete (unreinforced) of any description & in any position not otherwise specifically provided for. Complete all as specified & directed.

M&L for preparing new concrete surfaces and applying Two coats of Synthetic Enamel Paint over a coat of primer complete all as specified and directed by Engr-In-Charge.

M&L for 100 mm thick cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as sub base of floor complete all as specified and directed.

M&L for hard core of gauge n exc 63 mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface all as specified and directed.

S&F machine pressed precast concrete interlocking paver block any shape & size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement & pigment complete all as specified & directed.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

S&F in repairs 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed

S&F in repairs 110mm bore PVC (SWR) bends any radius complete all as specified and as directed

M&L for preparing old painted concrete surfaces and applying one coat of Synthetic Enamel Paint complete all as specified and directed by Engr-In-Charge.

M&L for Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth for foundation etc or for shafts, wells cesspits manholes pier holes etc not exceeding 10 Sqm on plan and not exceeding 1.5 m depth in soft /loose soil etc complete all as specified and directed.

M&L for Returning, filing in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in any type of soil etc complete all as specified and directed

M&L for Removing excavated material (Soil) exc. 250 m but n exc. 500 m and depositing where directed complete all as specified and directed.

M & L for Moorum / Red bajri filling in floors or pavings, laid in layer not exc. 15 cm tkick, spread, levelled, and blinded with earth including well ramming and watering as required complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light,fan,bell, socket or power) complete,including fixtures and fittings such as switches, ceiling roses, holders,regulators, sockets, tube light fittings i.e removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made for conditions separately ) and including making good the disturbed surfaces to match with existing surface and colour shade with proper putty for smooth finishing without andulations complete all as specified and directed.( Note:- All credit materials should be deposited in MES yard as available on work site the same materials should be issued to contractor through gate pass as per contract schedule of credit materials against contract agreement or taken on ledger with approval by accepting officer).

Material and labour for cutting chasing,pinning of brick/ stone/concrete wall at any height wall cutting and chases for concealed wiring for 20/25 mm PVC conduit dia pipe,water tubing,etc and making good to facings where required and pointing in cement motor 1:3 to ends or edges of landigs,wall surfaces etc,cutting not exc 10 cm girth and including making good the disturbed surfaces to match with existing surface and colour shade with proper putty for smooth finishing with existing wall complete all as specified and directed

M&L for point wiring using approved colour coding incl providing circuit wiring with 1.5 sqmm PVC insulated, FRLSH type, ISI marked,conf to IS-694/1990 unsheathed, multistranded, single core, copper cable 1100 volts grade cables drawn through in PVC Conduit 20/25 mm dia medium grade ISI marked (MMS) at any height/places and all accessories are concealed in walls / roofs / floors / ceiling etc. including suitable arrangements for flush mounting modular MS/GI boxes as per site requirement/suitable for modular top cover and frame for fixing of modular switches,sockets,fan regulators, blank plate etc and including 1.5 Sqmm PVC insulated multistranded FRLSH type unsheathed(Green colour),single core cable with copper cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade with necessary putty for smooth finishing complete all as specified and directed for One light point controlled by one 10amps switch.

All as item no. 37 but for One fan point controlled by one switch 10 amps, and one regulator.

All as item no. 37 but for One exhaust fan point controlled by one 10 amps switch .

All as item no. 37 but for One 5 pin 6 amps socket point controlled by one 10 amps switch on independent board .

All as item no. 37 but for One 5 pin 6 amps socket point controlled by one 10 amps switch on same board .

All as item no. 37 but for One bell/buzzer point controlled by one bell push.

All as item no. 37 but for One light point controlled by two 2 way switches/bed switch point

All as per item No. 41 and 43 above,but point wiring with 2.5 sqmm and earth conductor of size 2.5 sqmm incl circuit wiring complete all as specified and directed for One 6 pin 16/6 amps socket outlet point controlled by one 16/20 amps switch on independent board.

All as per item No. 44 One 6 pin 16/6 amps socket outlet point controlled by one 16/20 amps switch on same board.

All as per item No. 44 above ,but point wiring with 4.0 sqmm and earth conductor of size 4 sqmm incl circuit wiring complete all as specified and directed.

M&L for point wiring using approved colour coding incl providing circuit wiring with 1.5 sqmm PVC insulated, FRLSH type, ISI marked,conf to IS-694/1990 unsheathed, multistranded, single core, copper cable 1100 volts grade cables drawn through PVC casing and caping 20/25 mm width double locking medium grade ISI marked (MMS) at any height and all accessories such as Tee,bend,short piece & elbow on surface on walls / roofs / floors / ceiling etc. including providing suitable arrangements for flush mounting modular MS boxes as per site requirement/suitable for modular top cover and frame for fixing of modular switches,sockets,fan regulators, blank plate etc and including 1.5 Sqmm PVC insulated multistranded FRLSH type unsheathed(Green colour),single core cable with copper cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade with necessary putty for smooth finishing complete all as specified and directed for One light point controlled by on switch

All as per item no. 47 but One fan point controlled by one switch and regulator

All as per item no. 47 but One exhaust fan point controlled by one switch.

All as per item no. 47 but One 5 pin 6 amps socket point controlled by one 6 amps switch on independent board .

All as per item no. 47 but One 5 pin 6 amps socket point controlled by one 6 amps switch on same board .

All as per item no. 47 but One bell point controlled by one bell push.

All as per item no. 47 butOne light point controlled by two 2 way switches.

All as per item No 47 but point wiring with 2.5 sqmm and earth conductor of size 2.5 sqmm and incl providing circuit wiring complete all as specified and directed for One 6 pin 6/16 amps socket outlet point controlled by one 16 amps switch on independent board.

All as per item No. 54 One 6 pin 6/16 amps socket outlet point controlled by one 16 amps switch on same board.

All as per item No. 47 above ,but point wiring with 4.0 sqmm and earth conductor of size 4 sqmm incl providing circuit wiring complete all as specified and directed.

Supply & fixing and fixing in repairs modular type switch 10 Amps, single pole,1way,1 module,240V,AC, ISI Marked complete all as specified and directed.

Supply & fixing and fixing in repairs modular type switch 10 Amps ,2way,single pole,1 module,240V,AC, ISI Marked complete all as specified and directed.

Supply & fixing and fixing in repairs modular type bell push 6 Amps,1 module, single pole, 240 volts,AC, ISI Marked complete all as specified and directed.

Supply & fixing and fixing in repairs modular type switch 16 Amps, single pole,1way,1 module,240V,AC, ISI Marked complete all as specified and directed.

Supply & fixing and fixing in repairs modular type socket shuttered type 6 Amps, 2/3 Pin combined 2 module,240V,AC ISI Marked complete all as specified and directed.

Supply & fixing and fixing in repairs modular type socket 6 A/16 Amps, 6 Pin combined shuttered socket 2 module,240V,AC ISI Marked complete all as specified and directed

Supply & fixing and fixing in repairs red color lighting indication lamp 6 Amps, single pole,240volts,AC,50 Hz suitable for 1 module ISI Marked complete all as specified and directed.

Supply & fixing and fixing in repairs modular type step fan speed regulator 120W, 2 module,230volts,AC, 360 degree rotation 0 to 4/5 steps, ISI Marked complete all as specified and directed.

Supply & fixing and fixing in repairs call bell AC, 230 Volts single pole, multi music type ISI marked, complete all as specified and directed.

Supply & fixing and fixing in repairs call bell ding dong AC, 230 Volts single pole, multi music type ISI marked, complete all as specified and directed

Supply & fixing and fixing in repairs angle lamp holder, insulated body with back plate for batten fittings complete all as specified and directed.

Supply & fixing and fixing in repairs ceiling rose, 3 terminal ,PVC/polycarbonate body ISI marked, complete all as specified and directed.

Supply & fix decorative box type 20 watt light fitting,blue coloured end caps, pre-wired and including providing single/double side LED tubelight(tube rod) white/warm 20 watt-01 No made of aluminium extrusion with high efficient LED driver,IP-20, including PVC/Wooden round/square block -02 Nos and connected with LED fitting to ceiling rose and including removing old unserviceable fitting complete all as specified and directed.

Supply & fix decorative box type 9 watt light fitting,blue coloured end caps, pre-wired providing single side LED tube 9 watt-01 No, and including PVC/Wooden round/square block -02 Nos and connected with LED fitting to ceiling rose and including removing old unserviceable fitting complete all as specified and directed.

Supply and fixing, in repairs 20 watt LED pride plus triyca batten white decorative type,high quality materials,240V,50Hz, and slim integrated body,easy to install,PC diffuser and connected with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and directed.

Supply & fixing, in repairs 40 watt LED light fitting white lighting, high quality materials and intergrated design, PC diffuser, reliable and robust housing structure, easy to install, necessary arrangements for fixing with LED fitting to ceiling rose complete all as specified and directed.

S & F Energy efficient and energy saving new generation 10 watts LED bulk head light fitting IP-65 luminaire with opel diffuser pre-wired of luminaires including LED light driver and connected with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and directed.

Supply & fixing , in repairs LED bldg secruity light fitting of capacity 60 Watt LED street light fitting in aluminium PDC housing, toughened glass cover with IP65/66 protection and including removing of old unserviceable item complete all as specified and directed.

Supply and fix GI bracket pipe of size 25 to 32 mm dia as suitable medium grade of 1.2 mtr long bent to shape suitable degree of bending as per site requirement with hot or cold bending method of process for making the one end of GI pipe bracket suitable for fixing of any type street light fitting and shall be fixed on wall surfaces and including providing suitable fabricate galvanised flat iron clamps of 20X4 mm thick -02 Nos suitable for fixing at any place/height with hole fastners,nuts,bolts & washers including grouting on wall etc and including removing of old unserviceable item complete all as specified and directed.

Supply & fixing , in repairs in sheet metal enclosure with DD/AD type, 415 volts AC,TPN DB, 4 way,8+12 modules, flush mounting with 200amps copper busbar, 2 neutral/earth bars links and MCB incomer, and MCB SPN/SP/TPN as outgoing and complete for IP43&54 DBs protection and including removing old unserviceable DBs and incl making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed.Note for MCCB/MCB DBs and MCBs/MCCBs both are used same make only

Supply & fixing , in repairs in sheet metal enclosure , double door ,415 volts AC,VTPN DB, 4 way,8+12 modules, flush mounting with 200amps copper busbar, 2 neutral/earth bars links and MCCB incomer, and MCB SPN/SP/TPN as outgoing and complete for IP43&54 DBs protection and including removing old unserviceable DBs and incl making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed..Note for MCCB/MCB DBs and MCBs/MCCBs both are used same make only

Supply & fixing , in repairs sheet metal enclosure, double door, 240 volts AC,SPN,DB, 12 way, flush mounting with 100amps copper busbar,neutral bar,earth bar links and MCB incomer MCB SPN/DP and MCB SP as outgoing for IP 43& IP54 DBs protection nd including removing old unserviceable DBs and making good the disturbed surfaces to match with existing surface and colour shade acomplete all as specified and as directed.

Supply & fixing in repairs sheet metal enclosure, double door, 240 volts AC,SPN,DB, 8 way, flush mounting with 100amps copper busbar,neutral bar,earth bar links and MCB incomer MCB SPN/DP and MCB SP as outgoing for IP 43& IP54 DBs protection nd including removing old unserviceable DBs and making good the disturbed surfaces to match with existing surface and colour shade acomplete all as specified and as directed.

Supply & fix and fixing in repairs and sheet metal enclosure,double door, 240 volts AC,SPN,DB, 4 way, flush mounting with 100amps copper busbar,neutral bar,earth bar and MCB incomer,MCB SPN/DP, and MCB SP as outgoing for IP 43& IP54 DBs protection nd including removing old unserviceable DBs making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed.

Supply & fix and fixing in repairs MCB SP 6 to 32 Amps 10 KA,"C" series,AC,240Volts,50Hz , ISI marked and including removing old unsv items complete all as specified and directed.

Supply & fix and fixing in repairs MCB SPN 32 to 40 Amps 10 KA,"C" series,AC,240Volts,50Hz, ISI marked and including removing old unsv items complete all as specified and directed.

Supply & fix and fixing in repairs MCB SPN 40 to 63 Amps 10 KA,"C" series,AC,240Volts,50Hz, ISI marked and including removing old unsv items complete all as specified and directed.

Supply & fix and fixing in repairs MCB TPN 32 to 40 Amps 10 KA,"C" series,AC,440Volts,50Hz, ISI marked and including removing old unsv items complete all as specified and directed.

Supply & fix and fixing in repairs MCB TPN 40 to 63/100 Amps 10 KA,"C" series,AC,440Volts,50Hz, ISI marked and including removing old unsv items complete all as specified and directed.

M & L for sub main wiring complete in repairs with 2 run of 10 sqmm single core copper conductor (ISI marked)cable 1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn drawn through and including PVC conduit in concealed ISI marked medium grade(MMS) accessories such as Tee,corner, overlaping connector etc and including one run of 10 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked,FRLSH type as earth continuity conductor connected to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed. Note : - Two run of 10 sqmm single core copper conductor cable and one run of 10 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit.

All as per item No .86, but 2 run x 6 sqmm+1 run earth wire complete all as specified and directed.

All as per item No 86, but 2 run x 4 sqmm+1 run earth wire complete all as specified and directed.

All as per ditto item No .86, but 2 run x 2.5 sqmm+1 run earth wire complete all as specified and directed.

All as per ditto item No .86, but 2 run x 1.5 sqmm+1 run earth wire complete all as specified and directed.

Supply & fix and fixing in repairs suitable for flush mounting sheet steel enclosure metal clad plug and socket including MCB SP 20 Amps, 10KA 'C 'series, 230 Volts,50Hz suitable for AC's/Geysers complete all as specified and directed.

Supply & fix and fixing in repairs MCCB, 125 Amps,4 pole,415 Volts , 16/18KA thermal magnetic type with necessary lugs,thimbles, nuts bolts and washers and including removing old unserviceable item complete all as specified and as directed.

Material and labour for earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6mm thick buried directely in ground vertically ( earth pit not less than 2.25 metres deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanised iron strip of size 32 X 6 mm from earth electrode to test point or up to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate no 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade,GI funnel with wire mesh,including char coal, salt packed all around the earth electrode plate in layers,PCC earth pit chamber 1:3:6 type C1,RCC cover 1:2:4 type B1, including excavation,earth work in any strata and returning filling, removal of surplus soil and testing for required value complete all as specified and directed.

S&F for PVC non-metalic rigid conduit incl boxes,junctions boxes 1 to 4 way & terminals but incl of all tees,bends,elbows,reducers,bell mouth tube ends and fixing accessories such as couplers lock nuts,saddles,pipes hookes etc ISI marked heavy duty of size 20/25 mm dia for LAN,telephone and TV connections cablesincluding cutting,chasses and making good disturbed surfaces to match with existing surfaces with plaster/putty and including removing of old unserviceable item complete all as specified and directed.

Supply & fix and fixing in repairs copper conductor cable, PVC insulated, sheathed,flexible, multistranded,ISI marked, 1100 volts grade 3 core ;2.5 sqmm and including electric connection through PVC conduit in concealed/casing caping in surface from ceiling fan to ceiling rose and including removing old unserviceable item complete all as specified and directed. Make:-Havells/Finolex/Polycab

Supply & fix and fixing in repairs 20 watts LED post top lantern made in cast aluminium spigot housing with decorative opal polycarbonate diffser and IP65 protection and providing suitable fixing arrangements,nuts,bolts and washers and including removing old unserviceable item complete all as specified and directed.

Supply & fix and fixing in repairs 40 watts LED post top lantern made in cast aluminium spigot housing with decorative opal polycarbonate diffser and IP65 protection and providing suitable fixing arrangements,nuts,bolts and washers and including removing old unserviceable item complete all as specified and directed.

Supply & fix and fixing in repairs LED flood light light fitting of capacity 170 Watt LED, light fitting in aluminium PDC housing, toughened glass cover with IP-65 protection and including removing of old unserviceable item complete all as specified and directed.

Supply & fix and fixing in repairs LED flood light light fitting of capacity 120 Watt LED, light fitting in aluminium PDC housing, toughened glass cover with IP-65 protection and including removing of old unserviceable item complete all as specified and directed.

Supply & fix and fixing in repairs LED flood light light fitting of capacity 100 Watt LED, light fitting in aluminium PDC housing, toughened glass cover with IP-65 protection and including removing of old unserviceable item complete all as specified and directed.

Supply & fix and fixing in repairs LED flood light light fitting of capacity 70 Watt LED, light fitting in aluminium PDC housing, toughened glass cover with IP65 protection and including removing of old unserviceable item complete all as specified and directed.

Supply and fixing and in repairs galvanised metal flush box 1/2 module, ISI marked,and suitable for existing type as per site requirement and including removing old unserviceable item from existing loaction complete all as specified and as directed.Make:-Legrand/Crabtree/Schneider or equivalent make approved by GE

All as per item No- 102 but metal box 3 module

All as per item No-102 but metal box 4/5 module

All as per item No-102 but metal box 6 module

All as per item No-102 but metal box 8/9 module

All as per item No-102 but metal box 12 module

All as per item No-102 but metal box 16 module

All as per item No-102 but metal box 18 module

Supply and fixing in repairs modular white/wood/glazed type cover plate with frame 1 module,ISI marked and suitable for existing type as per site requirement and incl screws,washears etc and including removing old unserviceable item from existing loaction complete all as specified and as directed.

All as per item No-110 but modular any type cover plate with frame 2 module

All as per item No-110 but modular any type cover plate with frame 3 module

All as per item No-110 but modular any type cover plate with frame 4/5 module

All as per item No-110 but modular any type cover plate with frame 6 module

All as per item No-110 but modular any type cover plate with frame 8/9 module

All as per item No-110 but modular any type cover plate with frame 12 module

All as per item No-110 but modular any type cover plate with frame 16 module

All as per item No-110 but modular any type cover plate with frame 18 module

Supply and fix in repairs of PVC/bakalite sheet round cover blanking plate as per site requirement with screws of existing fan junctions/ wiring junctions boxes etc

M&L for preparation of new plastered of wall/ceiling or concrete surface of walls or concrete and applying two coats of 3 mm thick wall care putty complete all as specified and directed

M&L for preparation of old decorated surface of wall and apply two coats of white wash complete all as specified and directed

M&L for applying two coats of oil bound distember on wall or concrete over a coat of primer on prepared surfaces including,rubbing with sand paper after complete removal of existing treatment complete

M/s Bapujee Builders and Traders (BID ID -3393728)

P JAGANNADHARAJU (BID ID -3394769)

M/S. KISHAN ENGINEERING (BID ID -3391105)

TECHNO SOFT SOLUTIONS (BID ID -3394796)

B.Veerabhadra Rao (BID ID -3395284)