SPECIAL REPAIR TO TOILET BLOCK AT 151 BASE HOSPITAL UNDER GARRISON ENGINEER GUWAHATI

Amount

B/R PORTION

Taking down chowkhats or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkhats or frames area exc. 1.50 Sqm but not exc. 4.00 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down shutter of any description n exc 1 sqm each complete all as specified and directed.

Taking down shutter of exc 1 and n.exc 2 Sqm each complete all as specified and directed.

M&L 2nd class hardwood, Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

Supply and fixing of 30 mm thick 2nd class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.

Supply and fixing 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commerical type on both sides complete all as specified and directed.

Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes far top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC “C” channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Paneling of plain colour PVC sheets to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and as directed.

Supply and fixing factory made solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed single piece extruded PVC profile reinforced with MS square tube in opening & edges shall be painted to match with printed sheet as per specifications complete all as specified.

Supply and fixing Powder coated aluminium frame for doors, windows, ventilators, partitions with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed Note:- Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed

Supply and fixing Powder coated (minimum thickness of powder coating 50 micron) anodised aluminium doors shutters including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, along with standard locking arrangements, handles, tower bolts etc as required. complete all as specified and directed Note:-(i) Labour charges for fixing of glass/wire guage is inclusive in the unit rate quoted. Glass/Wire Guage shall be measured and paid seperately at supply only rates (ii) Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed

Supply and fixing anodized aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 Nos), suitable handle (1 No.) complete all as specified & as directed. Note:- (i) Labour charges for fixing of glass/wire guage/aluminum grills is inclusive in the unit rate quoted. Glass/Wire Guage/aluminum grills shall be measured and paid seperately at supply only rates (ii) Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed

Supply only 4mm thick tinted glass ordinary quality and glazing with beads fixed with metal panel pins or spring clips in squares not exc 0.50 sqm in each pane complete all as specified and as directed.

M & L for 12 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed to aluminium frame work complete all as specified and directed

Supply and fixing stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stable complete all as specified and as directed.

M&L for preparing new wooden surfaces of any description, not otherwise describe over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Supply and fixing 125 mm long aluminium anodized, barrel tower bolts of extruded section and fixed, complete all as specified.

M&L 300mm long, Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast, cast section and fixing bolts and sliding bolts of cost aluminium alloy complete all as specified.

Supply and fixing 150 mm aluminum handle cast type anodized, complete all as specified.

Supply and fixing butt hinges, medium weight cold rolled, MS steel of size 100 mm complete, all as specified and as directed.

Supply and fixing mild steel hold fasts; for securing chowkhats and similar small articles conforming to Fe-290 Gde-E-165 incuding treating hold fast with tar or coal tar black paint, sanding complete all as specified and as directed.

M&L providing plain cement concrete type C-1, (1:3:6), (using 20 mm graded stone aggregate), as in copings, fixing of hold fast, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.

Supply and fixing powder coated aluminum alloy interlocking snap grid 600mmx600mm consists of main tee runners of size 38mm x 25mm x1.5mm and cross Tee of size 25mm x 25mm x 1.5mm spaced between the main Tee at 600mm centre to cntre to form a grid of 600mm x 600mm etc complete including notching preparing holes and supporting hanger comprising of J hooks soffit cleat holding clip, level clip etc as per manufacturere's instructions complete all as specified and as directed

M&L for 4mm thick non asbestos fibre cement building boards fixed or laid/inserted to timber /GI/Aluminium frame work with complete all as specified and as directed

Supply and fixing mild steel framed work such as grills, gratings, gusset plates, rail braces, wind ties etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing frame work of water tanks and similar works of Gde E-165 (Fe 290) including welding etc. complete all as specified & as directed.

M&L preparing new Steel surfaces of any description, not otherwise describe over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Demolition of brick work/ block masonry or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles and removal all rubbish material complete all as specified directed.

M&L Brick work with sub-class 'B' bricks, straight or curved on plan to any radius in full brick thick walls, built in cement mortar 1:6 complete all as specified and as directed.

Taking down cement or cement lime plaster any description on any walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for 15mm thick rendering in two layer on fair faces of brick masonry or concrete surfaces of walls consisting of 1st layer of 10mm thick plaster in CM (1:6) and 2nd layer (setting coat or top layer) of 5 mm thick plaster in CM (1:4) mixed with water proofing compound (ISI marked) @ 3% by weight of cement or as per manufacturer’s instructions, finished fair & even without using extra cement complete, all as specified. Note : - Supply only water proofing compound shall be measured and paid for separately.

Supply only liquid water proofing compound. Note :- Dose of WPC shall be used as per manufacturer's instruction.

M&L rendering 10mm thick on other than fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete as specified and directed.

M&L Preparation of new plastered surfaces of walls and applying two coats of acrylic distemper over a coat of primer complete all as specified and as directed.

M&L for preparation of old surfaces of walls and distempering one coat with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 75 mm thick PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in plinth protection and width shall be as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing and removing debrires from the site complete all as specified and as directed.

M&L for glazed ceramic tiles (coloured) 450mm x 350mm x 7mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick rendering (as screed bed) in cement & sand mortar 1:4 complete all as specified and as directed.

Material and labour coloured non skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed.

M&L for 18-20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in over and including 20mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match withshade of granite complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed

Supply and fixing as in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls as in rain water/soil waste etc complete all as specified and as directed.

Supply and fixing as in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls as in rain water/soil waste etc complete all as specified and as directed.

Supply and fixing as in repair 110mm bore PVC (SWR) bends of any radius complete all as specified and as directed.

Supply and fixing as in repair 75mm bore PVC (SWR) bends of any radius complete all as specified and as directed.

Supply and fixing as in repair 110mm bore PVC (SWR) junction single (Single "T") equal or unequal with access door complete all as specified and as directed.

Supply and fixing as in repair 75mm bore PVC (SWR) junction single (Single "T") equal or unequal with access door complete all as specified and as directed.

Supply and fixing as in repair 110mm PVC (SWR) floor trap or Nanhi trap, plain with grating including jointing with solvent cement complete all as directed.

Supply and fixing as in repair 75mm PVC (SWR) floor trap or Nanhi trap, plain with grating including jointing with solvent cement complete all as directed.

Supply and fixing as in repair 110mm bore PVC (SWR) vent cowl complete all as specified and as directed.

Supply and fixing as in repair 75mm bore PVC (SWR) vent cowl complete all as specified and as directed.

Taking up or down 15 mm bore GI pipe and connection complete all as specified and as directed.

M&L for 15mm dia steel tubing medium grade galvanised, with all fitting and fixed complete walls, ceiling and laid in floors complete all as specified and as directed.

Taking up or down 20 mm bore GI pipe and connection complete all as specified and as directed.

M&L for 20mm dia steel tubing medium grade galvanised, with all fitting and fixed complete walls, ceiling and lain in floors complete all as specified and as directed.

Taking up or down 25 mm bore GI pipe and connection complete all as specified and as directed.

M&L for 25mm dia steel tubing medium grade galvanised, with all fitting and fixed complete walls, ceiling and lain in floors all as specified and as directed.

Supply and fixing 500 liters rotational moulded polyethylene water storage tank, multi layered (cylindrical vertical with closed top cover) as per IS-12701-1996, hoisted and fixed in position including necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I including dismantling of old existing water tank and removing from site complete all as directed.

Supply and fixing 1000 liters rotational moulded polyethylene water storage tank, triple layered (cylindrical vertical with closed top cover) as per IS-12701-1996, hoisted and fixed in position including necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I including dismantling of old existing water tank and removing from site complete all as directed.

Supply and fixing as in repair ball valve high pressure of PTMT suitable for 20mm bore pipe (minimum weight -210Gm) with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed

Supply and fixing as in repairs vitreous china wash down water closet pan (Pedestal pattern), white including connection to drain (or outgoing pipe) with plastic WC seat cover white closed pattern with flat bottom and cover (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified & as directed.

Supply and fixing as in repairs vitreous china wash hand basin white flat back of size 550mm x 400mm including a pair of cast iron brackets embedded in PCC 1:3:6 type C-1 blocks of size 10 x 7.5 x15 cm with & including 32 mm dia PVC waste pipe and 32mm chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed complete all as specified.

Supply and fixing Hand shower (Health Faucet) (ABS BODY) with 8mm dia, 1m long flexible tube and wall hook as in repair complete all as specified and directed.

Supply and fixing Chromium plated toilet paper holder recessed type with stainless steel flap complete as directed.

Supply and fixing as in repairs 10 ltr capacity PVC valve less, symphonic action type, flushing cistern, low level, with inlet ball valve, float and brackets including flush pipe and PVC connection pipe 15mm bore with PTMT nuts of length 450mm, complete all as per directed.

Supply and fixing tubular towel rail 600 mm long of PTMT fixed with and including chromium plated brass screws and wooden / plastic cleats (mimimum weight 190 gms), complete all as directed.

Supply and fixing as in repairs 15mm bore Bib taps chromium plated, cast opper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

Supply and fixing as in repairs cast Copper alloy, chromium plated, fancy type, 15 mm bore angular stop valve with wall flange, screwed down, high pressure with crutch handle, screwed both ends for iron pipe or for union complete all as specified and directed.

Supply and fixing as in repairs pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'hot' or 'Cold' with long screwed shanks and flynuts screwed for iron pipe and fixed complete all as specified and directed.

Supply and fixing as in repairs grating doom 100 mm dia of PTMT (Minimum weight 25 gms) complete all as specified and as directed.

Supply and fixing as in repairs PVC connection 15 mm bore 450mm long directed with PTMT nuts complete all as specified and as directed.

E/M PORTION

Material and labour for concealed Point wiring with 1.5 sq. mm (nominal area) single core PVC insulated FRLS unsheathed multi-stranded copper conductor cable (maintaining colour code), 1100 volts grade in and including non metallic rigid PVC cconcealed conduit medium grade, not less than 20mm in dia ISI marked with all fittings and accessories ifixed on recesses of wall/ceiling/roof and chiselling on wall complete and making good the disturbed surfaces of wall/ceiling by cement sand mortar 1:4 including painting to existing surfaces etc with sunken type pressed steel/welded MS terminal boxes made out of 1.2mm thick MS sheet, 3mm thick modular top cover for mounting of modular fittings, switches, sockets outlets, regulators etc and provisioning of 1.5Sqmm PVC insulated unsheathed FRLSH cable 1100 volt grade with multi stranded copper conductor to common earth and connected to earth dolly for for one light/ /ceiling/ exhaust fan point controlled by one oneway modular switch including taking down of unsv wiring complete all as specified and as directed.

All as per Item No. 2.01 above but wiring with 4Sqmm multistranded copper conductor unsheathed and 4sqmm copper conductor unsheathed cable as earth continuity conductor for one 3 pin 15Amps socket outlet point on independant board complete all as specified and as directed. Note for serial item No. 2.01 & 2.02: chase cutting & making good surfaces shall deemed to be included in the quoted rate.

Supply and fixing LED Tubelight lights fitting 1x 20W, 220V, AC decorative box type with CRCA body precoated white and pre wired for driver, holder connecting up with LED down rod with three core flexible copper conductor cable of suitable size from ceiling rose including 1x20W LED tube rod complete all as specified and as directed.

Supply and fixing LED tubelight fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fixing Lamp holder PVC / polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.

Supply and fixing exhaust fan, steel body, AC, single phase, 230V of size 380mm sweep with blades metal frame and louvers complete all as specified and as directed.

Supply and fixing Modular switch, one way, 5/6 Amps one module 240V complete all as specified and as directed.

Supply and fixing Modular switch, one way, 16 Amps one module 240V complete all as specified and as directed.

Supply and fixing Modular socket outlet 16 Amps, 6 pin, 3 module complete 240V all as specified and as directed.

Supply and fixing ceiling rose, surface bakelite two to three terminal 65x50mm three terminal 250/230Volt, ISI marked complete all as specified and as directed.

Supply and fixing factory made board distribution in sheet steel enclosure double door glazed with 200 Amps rated bus bar, SPN, 4 ways, 240 Volts suitable for housing MCBs complete all as specified and as directed.

Supply and fixing MCB, SPN, 240 volts, C Curve, 32 Amps 10 KA complete all as specified and as directed.

Supply and fixing MCB, SP, 240 volts, 20-32 Amps 10 KA, C Curve, complete all as specified and as directed.

M&L for earthing complete with galvanized steel earth plate electrode of 60 cm x 60 cm x 6mm thick buried directly in ground [earth pit not less than 2.25 metre deep below normal ground level] with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized earth wire of 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of MES SI Part I all as specified and testing on completion including provision of earth lead protected by 15 mm dia light grade GI pipe & watering pipe shall be 20 mm bore medium grade GI pipe including all excavation and earth work, PCC pit with RCC cover, char coal, salt, funnel etc including taking down old earthing complete all as specified and as directed. Note:- Rate quoted by tenderers shall be deemed to include for following provisions-[i]. Excavation & earth work in any type of soil including removing of surplus material upto 50 m. [ii].PCC 1:3:6 type C1 using 20mm graded stone aggregate in pit & 40mm thick precast RCC 1:2:4 type B1 cover 50x50 cm with 8mm TMT bars @ 10 cm C/C both ways with handles.[iii]. Main earthing lead from earth electrode to test point upto 7.5 mtr.[iv]. Funnel with watering pipe [GI pipe] 20mm bore medium grade & copper lugs, charcoal & salt as reqd.[v]. GI protection pipe of size 15 mm bore light grade 7.5m.

M/s Rohan Enterprise (BID ID -3144758)