Special Repair of ITI (for Women) at Rewari District.

Amount

Removing door and windows (wood and steel) with chowkats by making recesses in walls when the walls is not to be dismantlled (HSR 8.18 (a)) Doors

(b) Windows

Pressed steel sheet frames (chowkats), consisting of 2 mm thick steel sheet of the specified section, including iron lugs (hold fasts), iron hinges, conforming to P.W.D. specifications, including bolts for fixing stops, lock notch, provision for receiving tower bolts, and finished with one coat of ready-mixed paint red lead non-setting primer, of approved quality, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame, and cement concrete 1:3:6 for lugs complete: - (d) door and window frame of size 114 mm X 50 mm with 35 mm wide double rebate (HSR 18.34) (d)

Factory manufactured panelled door or glazed window, shutters of commercial hard wood, such as hollock, champ, chikrassy and chaplash etc. (non-conferous timber other than teak,conforming to I.S.specification No.1003,kiln-seasoned),with 100 mm wide verticle styles, 150 mm wide lock rail, 200 mm wide bottom rail and 100 mm wide other rails, with panels of 15 mm thick, tongued and grooved of commercial hard wood and including cost of iron hinges, screws, chocks/cleats, stops, nails etc., complete, fixed in position (excluding the cost of any fittings,other than specified above,but including labour for fixing the same in position). [HSR 17.90 b] 35 mm thick

Factory manufactured solid flush door shutters, with block board core as per I.S.No.16591969 bonded with water proof type phenol formaldehyde synthetic resin, hotpressesd, conforming to I.S.2202 part I and II, fixed in position, including iron hinges, screws, chocks /cleats and stops etc.(excluding the cost of any fittings other than specified above, but including labour for fixing the same in position)- (HSR 17.93 (a) (i)) (a) Commercial veneering with vertical grains or cross bands and face veneer on both sides commercial facing with laminated core and lipped edges.) (i) 30 mm thick

Commercial veneering with vertical grains or cross bands and face veneer on both sides commercial facing with laminated core and lipped edges.) (iii) 35 mm thick

Applying pink primer or aluminium priming ocat on wood work including preparation of surface, Knotting and stopping etc. (HSR 16.2 + 16.3)

Applying priming coat with metal primer on new steel or iron work including preparation of surface. (HSR 16.9 + 16.3)

Scraping (a) white wash and colour wash (HSR 8.32 (a))

12 mm thick cement plaster 1:4 (HSR 15.5)

Providing and applying two coats white cement based putty over plastered surface and grinding the surface smooth with sand paper to get an even and smooth finish including cost and carriage of all material, labour charges, scaffolding, sundries etc. complete (J.K. / Birla make) (HSR 16.81)

Applying priming coat with cement primer in all shades on newly plastered or concrete exterior surfaces. (HSR 16.25)

Providing two coats of exterior acrylic emulsion paint. (b) Ist Quality (HSR 16.79)

Preparation of plastered or concrete surfaces for painting, including sand papering the surface, applying one coat of linseed oil and filling with approved quality filler, consisting of white lead, linseed oil, varnish and chalk mitti including finishing surface to the required finish, complete. (HSR 16.24)

Distempering with washable oil bound distemper (of approved manufacture) two coats on old distempered work. (HSR 16.60)

Painting two coats with synthetic enamel paint in all shades on old wood-work or metallic or plastered or concrete surfaces to give an even shade including rubbing down old paint. (HSR 16.5)

Dismantling Brick Work, Tile Masonry or Tile Lining and Tile Terracing (b) in cement (HSR 8.5 (b))

Dismatnling Roofing (g) demolishing mud phaska in tile terracing (HSR 8.8 (g))

Stripping and stacking slates or tiles of a roof (HSR 8.10)

Terracing consisting of tiles 22.86 cm X 11.43 cm X 3.81 cm laid over 87.50 mm mud filling on a layer of 25 mm mud plaster and on other layer of mud mortar for laying the tiles, including two coasts of bitumen laid hot at 1.65 Kg per sqm on top of R.C.C. slab including grouting with cement sand mortar 1:3 and top surface to be left clean etc. (HSR 13.13)

Providing & fixing vitrified tiles of size 600 x 600mm of approved made in flooring laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles. Note:- Tiles shall be of premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, & RAK. (HSR 14.89) (Note: double charged tiles shall be used)

Providing and fixing vitrified tiles of size 600x600mm of approved make in skirting / dado laid in any pattern as specified over base of 12mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles. Note:-Tile shall be of premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA,RAK(Note: double charged tiles shall be used) (HSR 14.90)

Dismantling cement conglemerate / terrazzo floors 25 mm to 50 mm thick including concrete base (HSR 8.25)

Conglomerate floor 50 mm thick cement concrete topping 1:2:4 (HSR 14.10)

Dismantling white or coloured glazed tiles (to be carefully removed) (HSR 8.38) Floor:-

Walls :-

Providing and fixing ceramic-tiles / anti-skid tiles of size 400x400mm or above size of approved make in floors laid in any pattern over base of 20 mm thick Cement Sand Mortar 1:3 and jointed with white cement slury mixed with pigment to match the shade of tiles. [HSR 14.91] Note:-Tile shall be of premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA,RAK.

Providing and fixing 1st quality ceramic-glazed wall tiles confirming to I.S. 15622 (thickness to be specified by the manufacturer) of approved make in all colors, shades except burgundy, bottle green, black of any size as approved by Engineer -In-Charge in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 coarse and jointed with grey cement slurry, including pointing in white cement mixed with pigment of matching shades complete. (b) Size of ceramic Giazed tiles 300mm x 450mm. [HSR 14.92]

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE EUROPEAN TYPE WATER CLOSET SUITE WITH CONCEALED ‘P’ or ’S’ TRAP with or without vent (as approved by the Engineer-in-Charge) and all other necessary fittings as fully described in item no.30.3 above. (i) White (HSR 30.6 (i) + 30.12)

PROVIDING AND FIXING POSITION BEST INDIAN MAKE FLAT BACK OR ANGULAR LIPPED FRONT URINAL 465 MM HIGH CONSISTING OF : - (i) Flat back lipped or angular urinal basin of VITREOUS CHINA WARE (to the approval of the Engineer-in-charge). (ii) 5 LITRES CAPACITY mosquito proof INDIAN MAKE C.I.AUTOMATIC FLUSHING CISTERN, PAINTED WITH non-yellowing white enamel paint or other approved shade enamel paint on outside and superior black bitumastic paint on inside complete with screwed 15 mm pipe; (iii) PAIR OF R.S.PR C,I. PAINTED BRACKETS AND BRASS COUPLINGS; (iv) Standard size G.I.FLUSH PIPE WITH C.P.BRASS WALL CLIPS AND UNIONS COMPLETE INCLUDING CUTTING AND MAKING GOOD THE WALLS AND FLOOR AND PAINTING OF FITTINGS ETC. (as required by the Engineer-in-charge). (i) White (HSR 30.19 (i))

Providing and fixing HDPE WATER STORAGE TANKS of Sintex, Diplast, O.K. Supreme make with covers/lids marked with IS: 12701 on roof top of buildings including cost of hoisting and placing in position, making connections with inlet and outlet pipes, providing over flow & scour provisions with suitable plug on scour pipe including cost of nipples, washers, flanges for connections in tanks completein all respects to the satisfaction of Engineer-In-Charge. (Except civil work).(HSR 30.119)

Providing and fixing in position best Indian make lavatory suites (with full anit splash rim in vitreous chinaware and all other necessary fitting as fully described in item No. 30.41 above. WHITE (i) Size 510mm X 400 mm with one no. tap (HSR 30.42 (i) + 30.44 (i))

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE TOWEL RAILS FIXED in with raw slugs embedded in walls with C.P. brass screws. Complete in all respect INCLUDING CUTTING AND MAKING GOOD THE WALLS ETC. (e) C.P. brass towel ring (HSR 30.68 (E))

Providing and fixing in position best Indian make Soap dish fixed into wall with C.P. brass screws and complete in all respects including cutting and making good the wells etc. (a) C.P.BRASS (i) Soap dish large (HSR 30.70 (a) (i))

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE BEVELLED EDGE 5.5 MM THICK MIRROR mounted on ASBESTOS sheet GROUND FIXED IN POSITION BY MEANS OF 4 NOS. CHORMIUM PLATED BRASS SCREWS AND WASHERS over rubber washers and rawl plug embedded in the wall of chromium plated brass clamps with C.P. brass screws (as required by the Engineer-in-charge) COMPLETE INCLUDING CUTTING AND MAKING GOOD THE WALLS ETC. (a) INDIAN MAKE (i) 600mm X 450mm (HSR 30.71 (a) (i))

Providing and fixing in position 15mm i/d C.P. brass bib cocks of best quality (as required by the engineer-in-charge). (a) Bib cock long body (HSR 30.75 (a))

Providing and fixing 25mm thick marble partition for different type of urinals. (a) Size 375 mm X 750 mm (HSR 30.40 (a))

Providing & fixing PVC Rain Water pipe of 6 Kg Pressure of ISI mark in cement mortar during masonary work. (HSR 13.89)

Providing & fixing PVC Bend ISI Mark. 150mm dia PVC Bend. (HSR 13.90 (b))

Supplying and fixing glass panes including special metal sash putty of approved make (b) (b) glass panes 4 mm thick, exceeding 40 sq dm areas. (HSR 18.30)

Cement Concrete 1:4:8 with stone aggregate 20mm nominal size in foundation and plinth. (HSR 10.38)

Providing and laying 80 mm thick interlocking paver block of all shapes and colours in design mix M-35 over bed of 30mm thick fine sand complete in all respect. [HSR 10.159]

Providing and laying aluminimum work for doors, windows, ventilators and portions with excluded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS,733 and IS,1285 fixed with rowel plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions hold fasteners, at top, button, and sides with required neoprene felf etc aluuminimum sections shall be smooth, rust free straight mitered and jointed mechanically wherever required incljuding clear angle, aluminimum snap beading for glazing/paneling C.P. brass/ stainless steel/ screws, etc. complete, shutters of doors, windows & ventilators including providing and fixing hinges/pivots and making for fixing of fittings wher4ever required including the cost of PVC/neoprence gasket required including aluminimum fitting kg (HSR 17.96)

Providing and fixing 12mm thick pre-laminated particle board flat pressed three layer of graded wood particle board to IS 12823 grade I typw II in paneling fixed in aluminum doors, windows shutters and partition frames with C.P. brass/ stainless steel scres etc. complete. (HSR 17.97 (a)) Pre-laminated particale board with decorative lamination on one side & balancing lamination both side

Recovery items: The rates quoted against recovery items will not be included in the total amount rather is will be deducted while calculating financial statement of the agency. Material obtained from dismantling of existing brick work, bituminous layer and granular layer have been calculated taking assumption that 80% of theoretical material will be retrieved. The dismantled material can used in any of the item for the work after modification (bringing it to required specification) after approval from employer. In case it is not possible to use this material on the work, the agency can take away this material. This material can be taken away by the agency at the price quoted by the agency but minimum price to be quoted is limited to reserve price as fixed and mentioned as under:- Good Brick @ 4.00 Each

Brick bats @ 400 P.Cum

Old Door with Chowkats @ 500 Each

Window with Chowkats @ 400 Each

Old Rusted G.I.Pipe 25 mm i/d @ 20.00 Kg Note: - All quantities of the above materials have been worked out on the basis of theoretical quantities laid on this road. However, agency may visit site before quoting rates and assess the extent of retrieved material. There shall be no measurement after actual dismantling and if material after dismantling is found on lesser side, no claim of agency on this score will be entertained and full recovery on the basis of quoted rate and quantity exhibited in the BOQ shall be made. The reserve rates are minimum rates to be used as base for quoting purchase rate by the agency. No rates below the reserve price will be entertained and reserve price will be considered for all purposes in case the agency quotes lesser than reserve price. Note:- In Case of any difference in the unit & nomenclature of any of the HSR items depicted in this DNIT and that given in HSR, the unit and nomenclature given in HSR shall be applicable.

sahil

prashant construction company