REPAIR/MAINT OF B/R WORKS OF WSA AT AF STATION GORAKHPUR

Amount

Taking down cement or cement lime plaster of any description on brick or stone walls or on concrete surface etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

Demolition of brick work built in cement mortar of any description complete all as specified and as directed.

M&L Brick work with sub class B bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L 15mm thick rendering in cement mortar 1:4 on brick work or concrete surface as in wall, surface finished even and fair complete all as specified and as directed.

M&L 15mm thick rendering in cement mortar 1:6 on brick work or concrete surface as in wall, surface finished even and fair complete all as specified and as directed.

M&L applying two coats of exterior emulsion paint of approved shade in camouflage pattern (Two or more colour combination) over a coat of primer including preparation of newly plastered surfaces of wall complete all as specified and as directed.

M&L applying two coats oil bound distemper of approved shade over a coat of alkali resistant primer over including preparation of newly plastered surfaces of wall complete all as specified and as directed. .

M&L applying two coats of exterior emulsion paint of approved shade in camouflage pattern (Two or more colour combination) including preparation of old plastered surfaces of walls by scraping and removal of existing treatment complete all as specified and as directed.

M&L applying one coat oil bound distemper of approved shade including preperation of old decorated plastered surfaces of wall complete all as specified and as directed. .

Dismantling of PVC Sheet/ linoleum sheet in floor of any description complete all as specified and as directed.

S&F 3.30 mm thick linoleum sheet, plain/ coloured, laid dry in floors sealed down with an approved adhesive including stretching, cutting and fitting complete all as specified and as directed.

Repair/easing/ readjusting of aluminium door/window shutters by taking down shutters from frame and dismantling members of shutters like, glass, rails and styles by necessary cutting, grinding of members etc and refixing of same including rubber gasket ,hinges , handle, screws etc area of shutters not exceeding 2 Sqm complete all as specified and as directed.

Demolition of cement concrete as in ground floor and paving not exceeding 15 cm thickness below or above ground level complete all as specified and as directed.

M&L 150mm thick cement concrete 1:1.5:3 using 20mm graded stone aggregate as in flooring as in panels including necessary use and waste of form work, top surface finished with broom complete all as specified and as directed.

M&L 100 mm thick cement concrete1:2:4 type B-2 using 40mm graded stone aggregate as in hardstanding /pavement, surface finished even and fair without using extra cement complete all as specified and as directed.

S&F machine pressed rubber moulded precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigment including taking out existing paver block complete all as specified and as directed.

Dismantling of wall panelling/ false ceiling board ,fiber insulation board any thickness including wooden cover fillets/ aluminium frame work complete all as specified and as directed.

S&F anodised aluminium snap grid ( size 605mm x 605mm) frame work for false ceiling with hangers 6 mm dia. galvanised iron (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of galvanised iron flat 40mm x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long and fixing 4mm thick non asbestos fibre cement building boards on aluminium framework complete all as specified and as directed.

Taking down chowkhats or frame with shutter (without taking out shutter from the frame) exceeding 1.50 sqm and not exceeding 4 sqm each and removing from site complete all as specified and as directed.

M&L for framed work such as doors or gates angle or other section with gusset plate, rails, braces etc complete drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering , running rails and guides and hangiing also fastening and fixing complete all as specified and as directed.

M&L cement concrrete 1:3:6 type C-1 using 20 mm graded stone aggregate as in filling of hold fasts including necessary use and waste of form work complete all as specified and as directed.

S&F 35mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides fixed to chowkhats complete all as specified and as directed..

S&F 200 mm long aluminium anodized barrel tower bolt of extruded section, complete all as specified and as directed.

S&F 150 mm extruded aluminium alloy handle, fabricated type omplete all as specified and as directed.

S&F 100mm size butt hinges medium weight cold rolled mild steel and fixed complete all as specified and as directed.

S&F 250 mm long aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint of approved shade over one coat of pink primer including preparation of wood or wood based material of any description over 10 cm width or girth not otherwise described complete all as specified and as directed.

M&L for applying two coat of synthetic enamel paint of approved shade over one coat of red oxide primer including preparation of newly steel or iron work of any description, over 10 cm in width or girth not otherwise described complete all as specified and as directed.

M&L applying one coat of synthetic enamel paint of approved shade including preparation of old painted surfaces of steel or iron work of any description over 10 cm width or girth not otherwise described complete all as specified and as directed.

S&F rubber gasket 50 to 70 mm wide duly fixed on chowkhats of door/window with screws or other fixing articles complete all as specified and as directed.

Taking up or down 15 mm dia steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down 20 mm dia steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed.

Supply and Laying of 20 mm outer diameter of CPVC pipes SDR 11 and Plain CPVC SDR 11 fittings on walls or ceiling or in floors complete all as specified and as directed.

Supply and Laying of 25 mm outer diameter of CPVC pipes SDR 11 and Plain CPVC SDR 11 fittings on walls or ceiling or in floors complete all as specified and as directed.

M&L in repair weep holes for ventilation purpose of frame of approx size 150mmx150mm including fitted to expanded metal of aluminium wire not less than 0.9 mm dia of weight not exceeding 4Kg /Sqm complete all as specified and as directed.

SAI KRIPA BUILDERS (BID ID -3215684)

M/S EASTERN TECHNOCRAFTS (BID ID -3217021)

JYOT BUILDERS (BID ID -3214719)

DEEP ENTERPRISES (BID ID -3222647)

M/S SHAILZA TRADERS (BID ID -3216810)

M/S GUPTA TRADERS (BID ID -3217124)

M/S RAJEEV KUMAR (BID ID -3222542)

sanjay enterprises (BID ID -3222484)

H AND Y GROUP (BID ID -3222663)

H R ENGINEERS (BID ID -3222623)