MOEI , Fans , Compound light , RMO 100 KVA capacity DG Sets and AC equipment installed at Chief Electoral officer, Kashmere Gate, Delhi (Up-gradation of existing Local Area Network System consisting of CISCO make switches for Block B)

Supplying, Installation Testing and Commissioning of Managed 24 port L2 switch compatible for 19" rack mountable 1U having minimum 2GB RAM and 1 GB Flash memory, through put of minimum 90 NPPS, with retardant hot swappable power supply, modules/SFP, fan tray and should support MAC address 16000, stacking with dedicated stacking/MLAG ports of 80 GBPS stacking bandwidth, stackminimum 4 switches, Minimum 4 number of uplink interface , +. Power Output Capability 30W per port simultaneously, Minimum 24 x 1000Base-T (from Day 1), 4 x 1G/10G Uplink Interfaces. Should be loaded with 2X10Gbps MM SFPs from Day 1, should support protocol support SVIs (inter VLAN Routing), Static routing, OSPF, PIM, IEEE Standards 802.1d, 802.1s, 802.1w, 802.3ad, 802.3x, 802.1p, 802.1q, 802.3, 802.3u, 802.3ab, 802.3z, 802.3ae, 802.3 , minimum 500 IPV4 routes, 500 IPV6 routeswith IPv6 ready logo, 802.1x authentication and accounting, IPv4 and IPv6 ACLs, Dynamic VLAN assignment, IP Source Guard, 802.1x, DHCP Option 82 or equivalent, Dynamic ARP Inspection (DAI), MAC Limiting, Sticky MAC or equivalent, Proxy ARP, IPv6 Security IPv6 RA Guard, IPv6 DHCP Guard/DHCP Snooping, IPv6 Neighbor Discovery Inspection and IPv6 Source Guard, Access List/ Firewall Filters, QoS, IPv6, SSHv2, SNMPv2c, SNMPv3, NTP, RADIUS and TACACS+, Jumbo frame, Telemetry & Visibility using Netflow /jflow/sflow, SPAN, RSPAN, management functionality using open APIs/ NETCONF/RESTCONF using https/ YANG/ XML data models for external tools to automatically provision network resources/configuration or through https, switch should be EAL3/ NDPP/ NDcPP certified under Common Criteria OR should satisfy the TEC -ER /IR/GR standard complete with 1 Years Guarantee and software/firmware support etc complete as required.

Supplying, Installation, Testing and commissioning of small form-Pluggable (SFP) for Network Switches. Must be hot Pluggable, RoHS Complaint, etc. complete as required. i) 10 G SFP + Single Mode/Multi Mode

Supplying and fixing Patch Cord of Optical Fiber Multi Mode or Single Mode LC to LC Fiber Duplex having high precision ceramic ferrule with good concentricity, Fiber corning single mode G652D, Cable Type 2mm with Mechanical specification Apex Offset < 50 μm, Fiber Height + 100 nm, End-face radius of Curvature 7mm < R <25mm, Repeatability < 0.2 db, Working ambient Temperature – 5 0C to +50 0C, Storage Temperature – 10 0C to +50 0C, Length -- 2meter, Type -- LC-LC Duplex etc complete as required.

Supplying, drawing, Installation, Testing andcommissioning of CAT6 UTP LSZH 23AWG Twisted Pair Cable in existing conduit/ on surface, Category 6 Unshielded Twisted Pair, 4 pair should be complied as per UL/ETL verification program for compliance with ANSI/TIA-568.2-D standard. Outer diameter should be in the range of 6.1mm nominal with Operating Temperature Range : -5° to +60°C, Bending Radius : < 4 X Cable Diameter at –5°C ± 1°C and Pulling Force : 11.5Kg etc. complete as required. a) 1 Run of cable

Supply and fixing following port Rack Mount loaded LIU withpigtail, Front-mounted cable saddles for jumper management, suitable to manage both splices and terminations, Preassembledshelves in multiple configurations, Rubber fiber slotted bracket built-in, metal splice shelf to protect the fibers, 2 fiber spools built-in for 900μm tight buffered fiber storing, Capable of storing up to 3 meters of 900μm tight buffered fiber per adapter, Removable front and rear covers for better access to interior of LIU, Should be Single / Multi mode LC Type fully loaded. Accessory kit consists of cable ties, mounting ear screws, and spiral wrap tube etc complete as required.

Supplying and drawing following core Multi mode Fiber Optic Cable having corrugated steel armoring, leser optimize 50/125 μm with HDPE jacket, LSZH (Low smoke Zero Halogen), ightbuffered or loose tube, maximum attenuation: < 3.5 dB/km at 850 nm, < 1.5 dB/km at 1300 nm, bandwidth > 2000 MHz-km at 850 nm, > 500 MHz-km at 1300 nm compliance and certifications: ISO/IEC 11801 Ed. 2.2, ANSI/TIA-568-C.3, ITU-T G.651.1 RoHS compliant. Multi Mode Fiber shall be Centralloose tube filled with Thixotropic jelly, duly following Standards: ISO 11801, IEC 60793-1/60794-1-2, ITU-T-REC G.652D and Telecordia GR-20-core, High quality Electro Chromium Coated Corrugated Steel tape (ECCS ) and HDPESeath, Operating ambient Temperature should be – 5 deg C to +50 deg C and Storage Temperature should be – 5 deg C to +50 deg C, Maximum Attenuation ± 3.5 db / km at Operational Wavelength 850 nm and ± 1.5 db / km at Operational Wavelength 1300 nm . type of fiber should be 50/125 / G.652D & Refractive Index should be 1.483/1.478, The value for Mode-filed,Cladding Diameter 50 ± 2.5 μm and 125 ± 1μm corrospondingly etc complete as required. a) 6 Core Multi Mode Optical Fiber Cable

24 port Cat6 Patch Panel loaded. Must be of 1U height with clear label holders and white label with the panel. 24 Ports Cat-6 Patch Panel should have ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D following CAT6 Patch Cord should have ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D etc as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. a)25 mm

Supplying and drawing 20 Pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, armored telephone cable in the existing surface/ recessed steel/ PVC Conduit etc. complete as required.

Supplying & fixing of 50 Pair Krone Teg Block in 18 SWG Sheet duly powder coated with locking arrangement on door and should have openable slots. The box is to be provided with suitable size S.S frame etc