PROVIDING AND FIXING OF FUR...

Amount

SUPPLY AND PLACING OF MODESTY CLASSROOM DUAL SEATER DESK (DIMENSIONS - 1065MM X 930 X 812MM) UNDERSTRUCTURE MADE OF MILD STEEL TUBE 75MM X 25MM(SEATING BASE),68 X25MM(SIDE FRAME), 50X25MM(CONNECTING SIDE FRAME), 25X25MM(CONNECTING SIDE FRAME) 1.6MM THK. APPROX WEIGHT OF THE MS FRAME=22-25KG WITH SINGLE TUBE CURVE BENT TUBE FOR BACK CREATING A 110 DEGREE ANGLE FRAME WILL HAVE DYE CAST MILD STEEL D SHAPED MOULD PLATE OF 65MM RADIUS ON SIDE STRUCTURE BOTH SIDE FOR SUPERIOR STRENGTH OF FRAME & GOOD AESTHETICS LEGS WILL HAVE PVC RUBBERISED BOTTOM SHOE OF 68X25 & 25X25. 75X5MM CURVE LIFT BENDERS WITH BULLET PRESS MODESTY SURFACE OF 9MMX3MM(150MM WIDE) & MODESTY SURFACE OF 12MM X 12MM (150MM WIDE) WITH A-R TREATMENT & PRESSURE POWDER COAT WITH HEAT TREATMENT FOR DURABILITY OF TEXTURE ON SURFACE TOP, BACK, SEAT TO BE MADE IN ISI GRADE HDHMR BOARD (MAKE: ACTIONTESA)USING MAIER FOR FLAKING OF WOOD CHIPS 18MM + BSL (BORER RESISTANT & DENSITY NOT LESS THEN 850 KG/M3 DULY EDGE BANDED WITH 2MM RIHAU (ISI TAPE) WITH A COAT OF SIMIULATEOUS SANDING & A BUFFING COAT OF SHIELD SURFACE PROTECTOR( VISUAL ENCLOSED).COLOUR AS DESIRED BY ENGINEER IN CHARGE

Revolving High Back Chair (with Headrest) as per following specification. : The seat is made up of insert moulded Polyurethane Foam upholstered with foam laminated mesh fabric. The insert moulded foam is assembled over a load bearing plastic seat cover. The back is made up of two piece injection moulded frame. The inner frame is upholstered with mesh fabric and mounted on the main assembly. The back has adjustable lumbar support for achieving comfortable seating posture. Average size (+5cm) Sub Assembly Seat size = 52.5 cm Width, 51 cm Depth. Sub Assembly Back size= 48.5 cm Max Width, 62 cm Ht. Effective Back Ht from Seat = 57 cm The polyurethane foam for seat is moulded with density = 75 ±4 kg/m3 and Hardness = 34 ± 4. The armrest top is injection moulded in polyurethane and mounted on the injection moulded height adjustable type armrest. The armrest height is adjustable up to 4-5cm in 3 steps & width adjustable. Arm Top Out to Out Dim = 62 to 65 cm, Arm Top Centre to Centre Dim = 53 to 56 cm. The mechanism is designed with the following features: - 360 degrees revolving type - Single point control - Front pivot for tilt 5 with feet resting on ground ensuring more comfort - Tilt tension adjustment - 3position locking with anti shock feature.Spine bracket is made of Aluminium diecast piece connecting back with mechanism.The pneumatic height adjustment has an adjustment of 8.5(+2) cm. Pedestal is made of Die cast Aluminium fitted with 5 nos. twin wheel castors castor wheel dia. 6.0 + 1cm). The pedestal have to be 65 + 2cm. Pitch center dia. (71.0 cm with castors) + 3cm.The twin wheel castors are injection moulded in Nylon. Make : Geeken Signature 1, Kwality 1015, Godrej AEROSD010

Providng and fixing of Modular cum reading table made up of both side laminated HDHMR of 18mm thickness. Tabl dimensions with drawer are : 5ft x 2ft x 3.6ft (H) Top 5ft x 2ft Monitor Top 6inch x 5ft Modesty height 3.6ft Right Gabel 3.6ft x 2ft Left gabel 3.6ft x 2ft Modesty 3.6ft x 2ft 6inches Foot rest 3ft x 6 inches (double ) CPU unit 2ft x 2ft Mid partition between CPU unit & Footrest 2ft x 6 inches

DCD ENGINEERING SOLUTIONS PVT LTD

Bimlraj Outsourcing Private Limited

SDV ENTERPRISES