REPAIR/REPLACEMENT OF WOODEN AND STEEL FURNITURE UNDER BSO (AF) RAJOKRI OF GE (AF) GURGAON

Amount

Chair Dining JCO/OR FD/MAP-II/05 Repair to chair dining including dismantling of old parts and replace with new parts made out of well seasoned teak wood as mentioned below and setting right all other existing parts. Removing of unsv PVC Seat of Chair Dining MAP and Supply and fixing of 12mm thick plywood with 50mm 40 density cushion duly covered with leather cloth as approved by Eng-in-Charge, complete on the top of the seat of chair dining. Chair shall be polished with French polish in original shade after properly smoothening the surface with emery paper and apply wooden putty to fill up the gaps and cracks complete all as specified and as directed .

Front Leg

Rear Leg

Stiffner

Stiffner H type

Nylone buffer

Chair Dining FD 279 Repair to chair Dining including dismantling of old parts and replace with new parts made out of well seasoned teak wood as mentioned below and setting right all other existing parts. Chair shall be polished with French polish in original shade after properly smoothening the surface with emery paper and apply wooden putty to fill up the gaps and cracks complete all as specified and as directed .

Front Leg

Rear Leg

Stiffner

Stiffner H type

Side and back rail with drill canning hole suitable for 2mm thick cane

Chair Easy FD-229 Repair to chair easy including dismantling of old parts and replace with new parts made out of well seasoned teak wood as mentioned below and setting right all other existing parts. Chair shall be polished with French polish in original shade after properly smoothening the surface with emery paper and apply wooden putty to fill up the gaps and cracks complete all as specified and as directed.

Front Leg

Rear leg

Stiffner

Side/back rail with duly drill holes for 2 mm caning

Chair Writing FD-280 Repair to chair Writing including dismantling of old parts and replace with new parts made out of well seasoned teak wood as mentioned below and setting right all other existing parts. Chair shall be polished with French polish in original shade after properly smoothening the surface with emery paper and apply wooden putty to fill up the gaps and cracks complete all as specified and as directed .

Front Leg

Rear leg

Stiffner

Side/back rail with duly drill holes for 2 mm caning

Recaning of chair dining, chair writing and chair easy with 2mm wide half round cane plastic white in Godrej pattern with border of 3mm wide cane plastic, cane shall be of Premier/Ajay brand complete all as specified and as directed

Chair computer FD/E6/MAP/01 Taking out unserviceable seat and back of chair computer, supply and fixing of new seat and back 50mm foam cushion for seat, 50mm foam cushion for back covered with tapestry cloth as approved by Engr-in-charge complete all as specified and as directed.

Removing old unserviceable coaster wheel and S&F new coaster wheels of chair computer complete all as specified and as directed.

Removing old unserviceable base and S&F new Base of Godrej/Newage complete all as specified and as directed.

Removing old hydraulic system and S&F new hydraulic system complete all as specified and as directed.

Removing old unserviceable handles and S&F new handles complete all as specified and as directed.

Chair Verandah FD/E6/MAP/06 Repair to chair verandah by way of taking down UNSV PVC seat and Back from chair and cleaning by scrapping and making smooth surface and apply two coats of synthetic white enamel of ultra white colour Make (Asian/Apcolite/Burger) complete all as specified and as directed.

Taking down deteriorated portion of frame and providing new 19mm round tube of 16 gauge as in legs, frame stiffner etc (Each not exceeding 40 cm long) as required fixing with necessary welding and finishing as per existing with two coats of existing colour of synthetic enamel paint complete all as specified and as directed.

Supply and fixing of new PVC Seat and Back with 4mm thick with weight not less than 1.85 kg and grooves 90x10mm 10 nos on seat and back of approved best quality, complete all as specified and as directed

Supply and fixing of new PVC shoe of best quality as per drg.

Chair Verandah FD-256 M&L for preparation of old steel surface of chair verandah and welding loose joints. If any including de-rusting the surface and painting with one coat of synthetic enammel paint white colour( 1st Grade Quality) and recaning with 4-5 mm half round 0.8 mm thick plastic cane made out of virgin plastic, in existing pattern complete. Rest all as specified and directed by engr-in-charge. (Drg No FD 359/259/19) .

Supply & Fixing Hard Rubber Shoes suitable for chair verandah of approved quality

Dressing mirror FD/E6/MAP/16 Repair to dressing mirror including dismantling of old broken parts and replace with new parts as mentioned below. Dressing mirror shall be set right and repolished with French polish in original teak shade after properly preparation of surface by applying putty and smoothened with ambry paper.Rest all as directed by Engr-in-charge.

Taking out unserviceable mirror, supply and fixing of new Electro copper plated mirror 5.5mm thick with teak wood frame as per Drg.

Table computer FD/E6/MAP/03 Repair to table including dismantling of old broken parts and replace with new parts as mentioned below. Table shall be repainted with two coat of synthetic enamel paint OG/Black including denting and welding complete all as specified and as directed.

Taking out unserviceable top of table computer, supply and fixing of new top of pre-laminated particle board 18mm exterior grade BWR with all round 4mm teak wood beading as per Drg.

Taking out UNSV key board tray, supply and fixing of new key board tray as per Drg.

Taking out unserviceable drawer, supply and fixing of new drawer of teak wood except bottom which shall be of 6mm ply wood commercial.

Taking out old UNSV nylone buffers, S & F new nylone buffers superior quality as approved by Engr-in-Charge.

Table bed side Drg No. FD/E6/MAP/15 ( R) Taking out unserviceable top of table bed side, supply and fixing of new top made out of pre-laminated particle board 18mm exterior grade as per Drg.

Taking out unserviceable left/right sides of table bed side, supply and fixing of new right/left side of table bed side made out of pre-laminated particle board 18mm exterior grade..

Taking out unserviceable bottom of table bed side, supply and fixing of new bottom of made out of pre-laminated particle board 18mm exterior grade.

Taking out unserviceable partition of table bed side, supply and fixing of new partition of 6mm ply wood commrcial as per Drg.

Taking out unserviceable handles of table bed side, supply and fixing of new handles superior quality as approved by Engr-in-charge.

Sofa Set 5 Seater (Drg No FD/E6/MAP-II/02) Repair to sofa sets including dismantling of old back and seat cushions and replace with new back and seat cushions. Foam 50mm thick 32 density shall be fixed on back and covered with velvet cloth of superior quality as approved by GE, cost shall not be less than Rs 200/- per mtr. Foam cushions 100mm thick 32 density of size 530mmx500mm of make Sleepwell, Kurlon duly covered with malmal cloth and same velvet cloth as provided in back seat. Wooden frame of sofa set shall be set right and polished after repair in original teak shade. The under mentioned unserviceable/broken parts/components of the Sofa set shall be taken out and supply and fixing new parts/components made out of well seasoned teak wood free from knots and cracks as per existing shape, design and size all as shown on drg complete all as specified and as directed.

Long rail

Short rail

Rear leg

Handle/Arms

Charpoy IP Hard Top( Drg No. FD/MAP-II/01) Taking out old UNSV ply wood, Supply and fixing 12 mm thick ply wood commercial type of size 1980x900mm and fixed to GI pipe frame with nut bolts 6mm dia & 62 to 65mm long Make of ply wood Green/Duro/Archit with ISI marke

Removing of old UNSV PVC cap, supply and fixing new PVC cap of best quality as per Drg.

Painting of Charpoy IP hard Top with two coat of synthetic enamlel paint black including denting/painting and preparation of surfaces complete all as specified and as directed.

Locker Bed side steel(Drg No FD-257) M&L for preparation of surfaces external and internal by removing old paint, removing dents/bends, apply putty to obtain smooth surface and apply two coats of synthetic enamel paint olive green/smoke gray colour on internal and external surfaces over a coat of red oxide primer complete all as specified and as directed. Note: (i) Painting work shall be carried out after carrying out following reapair work. (ii) Repair work will be measured and paid separately under respective items.

Removing of old unserviceable CP handles, supply and fixing new mild steel chromium plated handles 100mm long as per Drg complete all as specified and as directed.

Removing of old unserviceable Hasp & Staple, supply and fixing of new mild steel chormium plated 100mm x 3mm thick Hasp & Staple complete all as specified and as directed.

Removing of old unserviceable shelves from locker steel, supply and fixing of new shelves of 1mm thick PBI Sheet as per Drg complete all as specified and as directed.

Removing of old unserviceable leg of locker steel, supply and fixing of new leg made of 1mm thick PBI Sheet as per Drg complete all as specified and as directed.

Removing of old unserviceable bottom sheet of locker steel, supply and fixing of new bottom of 1mm thick PBI Sheet complete all as specified and as directed.

Removing of old unserviceable hanging rod, supply and fixing of new steel hanging rod 18 gauge 20mm dia as per drg complete all as specified and as directed.

Charpoy GI Pipe(Drg No FD-220): Taking out existing old/ unserviceable ply wood from charpoy GI pipe and Supply and fixing 12 mm thick ply wood commercial type of size 1980x900mm and fixed to GI pipe frame with nut bolts 6mm dia 62 to 65mm long Make of ply wood Green/Duro/Archit with ISI mark complete all as specified and as directed.

Taking down unsv/broken long rails of charpoy GI pipe and S&F new long rails of charpoy made out of GI pipe 32 mm bore medium grade ISI marked and approved by Engr-in-Charge including threading as shown on drg complete all as specified and as directed. Make of pipe Prakash Surya/Tata/Zindal

Taking down unsv/broken short rails of charpoy GI Pipe and fixing the short rail (Short rail shall be made from long rail obtained from serial item No 15.01 above) including cutting and threading complete all as specified and shown on drg.

Taking down unsv legs of charpoy GI pipe & fixing legs in charpoy (Legs shall be made from short rail obtained from serial items 15.02 above) incl cutting & threading. The bottom of legs shall be provided with Cap (Plug) complete all as specified and shown on drg.

Taking out unserviceable elbow 3 way 32 mm bore of charpoy GI pipe and S&F of new elbow 32mm bore ISI marked as approved by Engr-in-Charge, complete all as specified and shown on drg.

Taking out unsv check nut from Charpoy GI Pipe & supply & fixing new check nut suitable for GI pipe as approved by Engr-in-Charge complete all as specified and shown on drg.

R C Sharma and Co

NAVEEN TRADERS

Rana Construction Co

SMS Enterprises