Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹48.4 LAccepted-Finance | L1 | Accepted-Finance Responsive | |
| 2 | L2₹54.7 L+₹6.2 L (12.9%)Accepted-Finance 124 JN ROAD DELANIPUR PORT BLAIR 744102 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744102 | L2 | Accepted-Finance Responsive | |
| 3 | L3₹56.8 L+₹8.4 L (17.3%)Accepted-Finance | L3 | Accepted-Finance Responsive |
Tender Value
₹57.3 L
EMD Value
₹1.1 L
Closing Date
14 Nov 2022, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EE PBSD APWD, Port Blair
EE PBSD APWD, Port Blair
Face-lifting of ITF Complex for forthcoming Island Tourism Festival at VIP Road during 2022-23
2022_APWD_7940_1
NIT No.100/EE/PBSD/2022-23
Open Tender
Civil Works - Others
Works
30 days
ITF Complex at VIP Road, Port Blair
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹1.1 L
22 Nov 2022
3 Nov 2022
14 Nov 2022
3 Nov 2022
14 Nov 2022
3 Nov 2022
Amount
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)
Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete in shelves, including setting in cement mortar 1:3 (1cement : 3 coarse sand), cost of required centering, shuttering and finishing with neat cement punning on exposed surfaces but , excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
Thermo-Mechanically Treated bars of grade Fe-500D or more.
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.
40 mm thick with 20 mm nominal size stone aggregate
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).
Dark shade pigment using ordinary cement
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
110 mm diameter
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :
Water thinnable cement primer
Finishing walls with Acrylic Smooth exterior paint of required shade :
New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
Applying priming coat:
With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :
Two or more coats on new work
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
Two or more coats on new work
Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:
One or more coats on old work
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :
One or more coats on old work
Painting with aluminium paint of approved brand and manufacture to give an even shade:
One or more coats on old work
Polishing on wood work with ready made wax polish of approved brand and manufacture :
Old work
Finishing walls with Acrylic Smooth exterior paint of required shade :
Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.
With cement mortar 1:4 (1 cement : 4 fine sand)
Renewing glass panes, with wooden fillets wherever necessary:
Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)
Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead :
Of sectional area 40 square centimetres and above
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brasspillar taps, 32 mm C.P. brass waste of standard pattern, includingpainting of fittings and brackets, cutting and making good the wallswherever require:
White Vitreous China Wash basin size 630x450 mmwith a pair of 15 mm C.P. brass pillar taps
Providing and fixing controlled flush, low level cistern made of vitreouschina with all fittings complete.
10 litre (full flush) capacity-white
Providing and fixing solid plastic seat with lid for pedestal type W.C.pan complete :
White solid plastic seat with lid
Providing and fixing P.V.C. waste pipe for sink or wash basin includingP.V.C. waste fittings complete.
a) Flexible pipe i) 40 mm dia
Providing and fixing 600x450 mm beveled edge mirror of superiorglass (of approved quality) complete with 6 mm thick hard boardground fixed to wooden cleats with C.P. brass screws and washerscomplete.
Providing and fixing toilet paper holder :
C.P. brass
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall
25 mm nominal dia Pipes
Providing and fixing brass bib cock of approved quality :
15 mm nominal bore
Providing and fixing brass stop cock of approved quality :
15 mm nominal bore
Providing and fixing uplasticised PVC connection pipe with brass unions :
a) 45 cm length i) 15 mm nominal bore
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :
100 mm diameter
Providing and fixing stainless steel sopa dish Holder having length of 138mm, breath 102 mm, height of 75mm with concealed fitting arrangements, weighting not less than 106 gms.
Providing and fixing wood work in rough dressed mill sawn timber wrought framed and fixed in roof frames, purlin, ceiling frames and post etc.
Superior Hard Wood Cat - II (A)
Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position :(Materials to be taken back by the contractor by dismantling/removing the same after the function).
Superior hard wood Cat-II B
Providing and fixing Plywood of different size and different thickness wherever required screeing all complete.(Materials to be taken back by the contractor by dismantling the same).
With 12 mm thick Plywood IS :303
With 6 mm thick Plywood IS :303
Providing and fixing Stage flooring with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work, complete as per direction of Engineer-in- charge (Frame work shall be paid for separately).
19mm thick Marine ply conforming to IS : 710
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.(Materials to be taken back by the contractor by dismantling/removing the same after the function)
Providing and fixing WPC (Wood Polymer Composite) board with ordinary cutting excluding frame work with:
12 mm thick
8 mm thick
Providing and fixing WPC (Wood Polymer Composite) board with computerised ornamental cutting excluding frame work with:
12 mm thick
Providing and fixing CPVC ball valve of approved qaulity.
25 mm nominal bore
Providing and fixing C.P. two way bib cock of approved quality as direction of Engineer - in - charge.
15 mm nominal bore
Providing and fixing CP finished Health Faucet with1 Meter long easy flex tube in Chrome Finish & Wall Hook
15 mm nominal bore
Providing and fixing single Towel rail 600mm long, Stainless Steel complete with brackets fixed to wooden cleats with CP Brass screws with concealed fittings arrangement of approved quality as per the direction of Engineer in charge
Providing and fixing Angle Valve for basin mixer and geyser points of approved quality.
15 mm nominal bore
Providing and laying hollow cement concrete block walling upto floor five level 200mm thick consisting of hollow block of size 400x200x200mm of mix 1:3:6(1 :cement 3 :coarse sand 6 :graded stone aggregate 10mm nominal and down size) having a crushing strength of 3.5N/sqmm at 28 days as per IS:2185 (part-I) 1979 laid in cement mortar 1:6(1 :cement 6 :coarse sand) upto floor five level.
Providing and fixing 19 mm plywood ornamental cutting including frame work of MS steel (flate & angle of 25x6mm and 40x 6mm thickness) and painting of ITF 2022 on top portion of main gate.
Wall painting with plastic emulsion paint of approved brand and manufacture of Asian Apex ultima weather shade Terracota (Code 0427) or equivalent to give an even shade as directed by Engineer In -Charge :
One or more coats on old work
Providing and fixing of Pre-coated colour or mill finish Aluminium Roofing Accessories in 0.71 mm thickness ,Alloy 31500 (IS designation) [Aluminium Alloy (AA) 3004 (ISO designation)] For color, coating shall be 5-7 microns epoxy primer on both sides of the sheet and polyester top coat 15-18 microns, using self drilling/tapping SS screws of size 6 x 50mm with 3mm thick EPDM seal and SS plain washer complete :
Precoated/mill finish aluminium Ridges (600 mm over all girth)
Supplying of Nylon tarpolin to protect stage during rainy time
Errection of G.I.Pole of 40 mm dia for flag mast including cplourful flag of shiphone cloth (Labour cost Only).
Providing and applying tack coat using hot straight run bitumen ofgrade VG - 10, including heating the bitumen, spraying the bitumenwith mechanically operated spray unit fitted on bitumen boiler,cleaning and preparing the existing road surface as perspecifications :
On bituminous surface @ 0.50 Kg / sqm
2 cm premix carpet surfacing with 1.8 cum and 0.90 cum of stonechippings of 13.2 mm size and 11.2 mm size respectively per 100sqm and 52 kg and 56 kg of hot bitumen per cum of stone chippingsof 13.2 mm and 11.2 mm size respectively, including a tack coatwith hot straight run bitumen, including consolidation with road rollerof 6 to 9 tonne capacity etc. complete (tack coat to be paid for separately).
With paving Asphalt grade VG - 30 with no solvent
Providing and laying Bitumen Penetration Macadam with hard stoneaggregate of quality, size and grading as specified, with bitumen ofsuitable penetration grade, including required key aggregate asspecified, spreading coarse aggregate with the help of self propelled/tipper tail mounted aggregate spreader and applying bitumen by apressure distributor and then spreading key aggregate with the helpof aggregate spreader complete, including consolidation with roadroller of minimum 8 to 10 tonne capacity to achieve specified valuesof compaction and surface accuracy :
For 50mm compacted thickness using coarse aggregateof size 50-20 mm graded @ 0.60 cum per 10 sqm keyaggregate of size 12.5 mm graded @ 0.15 cum per 10sqm. With paving asphalt grade VG - 10 @ 50 kg/ 10sqm.
Providing and laying seal coat of premixed fine aggregate ( passing2.36 mm and retained on 180 micron sieve) with bitumen using 128kg of bitumen of grade VG - 10 bitumen per cum of fine aggregateand 0.60 cum of fine aggregate per 100 sqm of road surface, includingrolling and finishing with road roller all complete.
Scarifying the existing bituminous road surface to a depth of 50 mmand disposal of scarified material within all lifts and lead upto 1km(by mechanical means).
Temporary arrangement for main sitting Pandal for VIP person made of G.I Pipe Post @ 15' c/c with profile sheet roofing fixed with J or L hooks over G.I pipe purlins and rafters 7.5' c/c or as required at site. The ceiling and post should be covered with cloth, frill around (Mateials to be taken by removing dismantling after completion of the function)
Providing and laying 1 layers of 19 mm thick plywood flooring (IS 303) on ground/existing lawn wherever found to be slusly area as per the direction of Engineer-in-charge. The plywood used for the flooring should be all around framed with 2"x3" superior Hard wood cat-II (not required plaining) including fixing the same with necessary nails and jointing with necessary tape etc. complete as per the direction of engineer-in-charge. (Required Materials will be arranged by the contractor themself and taken back by dismantling/ removing after the completion of function).
Hire charge of wooden carpet 4 mm of required shade over the plywood flooring.(Mateials shall be taken by removing /dismantling after completion of the function)
Providing and fixing of Canopee at ITF ground made of G.I Pipes.The ceilingshould made of G.I pipes. The Ceiling should be coverd with white cloth-frill all around (Mateials shall be taken by removing /dismantling after completion of the function)
Mega Engineers and Builders
J K CONSTRUCTION
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .