Loading…
Loading…
Tender Value
₹22.7 L
EMD Value
₹45,400
Closing Date
29 Jun 2026, 6:00 pm3d left
Similar tender results from the same govt authority in the past 3 years.
XEN
bda office
Installation of motors and construction of tin-shed rooms as required within the jurisdiction of the Bharatpur Development Authority (Annual).
2026_UITBR_569822_1
online nit 22(2026-2027)03 bharatpur Development Authorit
Open Tender
Miscellaneous Works
bharaptur
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
Secretary, BDA
₹45,400
Yes
20 Jun 2026
20 Jun 2026
30 Jun 2026
20 Jun 2026
29 Jun 2026
20 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | Item Code |
|---|---|---|---|---|---|---|
| 1 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils | 115.2 | Cum | 178 | ₹20,505.6 | BI01010001010000000000000515BI0100001122 |
| 2 | GALVANISED IRON SHEET
ROOFING
Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape whenever required. 1.00 mm thick with zinc coating not less than 275 gm/m2 | 328 | Sqm | 904 | ₹2,96,512 | BI01010001010000000000000515BI0100001123 |
| 3 | Random rubble dry stone Kharanja under floor. | 28.8 | Cum | 932 | ₹26,841.6 | BI01010001010000000000000515BI0100001124 |
| 4 | Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish : 20mm thick . | 72 | Sqm | 202 | ₹14,544 | BI01010001010000000000000515BI0100001125 |
| 5 | CEMENT CONCRETE (CAST-IN-SITU):
Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M20 grade Nominal Mix
1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size). | 16.2 | Cum | 4,915 | ₹79,623 | BI01010001010000000000000515BI0100001126 |
| 6 | CEMENT CONCRETE (CAST-IN-SITU):
Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). | 59.4 | Cum | 3,302 | ₹1,96,138.8 | BI01010001010000000000000515BI0100001127 |
| 7 | Brick masonry with F.P.S. bricks of class designation 75 in foundation and plinth with bricks Cement mortar 1 : 6 (1 cement : 6 coarse sand) | 5.52 | Cum. | 4,263 | ₹23,531.76 | BI01010001010000000000000515BI0100001128 |
| 8 | Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in: Cement Mortar 1:6 ( 1-Cement : 6-Sand). | 70.2 | Cum. | 2,838 | ₹1,99,227.6 | BI01010001010000000000000515BI0100001129 |
| 9 | Providing, lowering, laying in trenches, aligning, fixing in position and jointing Ductile Iron (DI) ISI marked K-7 grade S&S pipes as per IS:8329-2000 (amended up to date), with internal cement mortar lining suitable for potable water with rubber ring (EPDM) joints as per IS: 5382-1985 including transportation and freight charges, inspection charges, loading/ unloading charges, including cost of labour and material, specials (Tee, bend etc.) satisfactory hydraulic testing, disinfection, commissioning etc. complete as per technical specifications and direction of Engineer-in-charge. (excluding earth work)
Note: Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately.
Rates are exclusive of GST. 300 mm | 92 | R. Mtr. | 3,577.12 | ₹3,29,095.04 | BI01010001010000000000000515BI0100001130 |
| 10 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths DI standard specials with rubber ring (EPDM)/ nut bolt and insertion sheet and jointing as per IS: 9523-2000 or as amended up to date, such as tees, bends, tapers, caps etc. within trenches in Dl pipe line complete including all material, labour, testing and commissioning along with pipe line as per technical specifications and direction of Engineer-in-charge (excluding earth work).
Rates are exclusive of GST.
up to 300 mm diameter | 30 | Kg | 122.88 | ₹3,686.4 | BI01010001010000000000000515BI0100001131 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.70 MB
BOQ_1013961.xls
BOQ • 0.24 MB
Download all tender documents and submit your bid