Loading
Loading…
Loading…
Tender Value
₹67.2 L
EMD Value
₹1.3 L
Closing Date
19 Jun 2026, 3:00 pmClosed
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
DEN/HQ
14 conditions · 3 needing a document upload
Item no 10.2 of GCC 2022: Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure- VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. As per Clause 10.2 of Indian Railways Standard General Conditions of Contract'2022 with upto date correction slip. [Authority: Executive Director/Civil Engineering(G), Railway Board's letter No.2022/CE-I/CT/GCC-2022/Policy dated 14.07.2022]
SIMILAR NATURE OF WORK FOR THIS TENDER WILL BE - ANY CIVIL ENGINEERING WORKS.
24 conditions · 6 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Para 5(3) ii. Part I of GCC shall be read as under: The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document before closing date for submission of bids [i.e. excluding the last date of submission of bids] [Advance Correction Slip No.5 to Indian Railways Standard General Conditions of Contract, April 2022 vide Executive Director, Civil Engineering(G), Railway Board No.2022/CE-I/CT/GCC- 2022/Policy dated 20.10.2023].
The participating Bidder must submit self certificate [Annexure V & VA as applicable] duly downloaded from the link given in Submission of Document Verification Certificate or documents uploaded along with tender. [Advance Correction Slip No.3 vide Executive Director, Civil Engineering(G), Railway Board No.2022/CE-I/CT/GCC-2022/Policy dated 26.04.2023 and Advance Correction Slip No.4 vide Executive Director, Civil Engineering(G), Railway Board No.2022/CE-I/CT/GCC-2022/Policy dated 07.08.2023 ].
Maintenance period of contract - The Earnest Money/Bid Security deposited by the contractor will be converted into Security Deposit and will be refunded after six months of the date of completion of the work in all respect to the entire satisfaction of the Railway and on receipt of a certificate from the Assistant Engineer concerned.
All documents in support of fulfillment of eligibility criteria with respect to completion of similar nature of work for Technical Eligibility Criteria and Total contract value for Financial Eligibility Criteria should be submitted/ uploaded online in the website with scanned copy at the time of tender bidding with details showing in Annexure I, IV. No post tender communication, in any form will be made or entertained, after opening of tenders, in this regard. Railways may however call for the originals of the credentials for verification or any clarifications/confirmations on the contents of the documents submitted. Eligibility of tenderers shall be decided solely of the basis of the documents submitted along with the tender offers and any subsequent document whatsoever submitted in this connection would not be given any cognizance for finalization of the tender.
Payment through Letter of Credit is applicable for this tender as per Railway Board's letter no 2017/ACII/9/10 Pt I dated 20.02.2018 & 2018/CE-I/CT/9 dt. 04.06.2018 (Annexure B & C attached).
INSTRUCTION TO BIDDERS: A] The Railway reserves the right to verify all statements, information and documents submitted by the bidder in his tender offer, and the bidder shall, when so required by the Railway, make available all such information, evidence and documents as may be necessary for such verification. Any such verification or lack of such verification, by the railway shall not relieve the bidder of his obligations or liabilities hereunder nor will it affect any rights of the railway there under. B] In case of any wrong information submitted by tenderer, the contract shall be terminated, Earnest Money Deposit [EMD], performance Guarantee [PG] and Security Deposit [SD] of contract forfeited and agency barred for doing business on entire Indian Railways for 5[five] years.
Shramik kalyan Contractor[s] are requested to get themselves registered on Railways Shramik kalian portal at www.shramikkalyan.indianrailways.gov.in after issuance of letter of acceptance.
Contractor(s)/ Bidders are requested to refer to Clause 46A of Indian Railways Standard General Conditions of Contract'2022 with up to date correction slip for Price Variation Clause (PVC) in works contract. Item no 46A.1 of GCC 2022: Price Variation Clause (PVC) shall be applicable only in tender having advertised value above Rs. 2 Crores. [Authority: Executive Director/Civil Engineering(G), Railway Board's letter No.2022/CE-I/CT/GCC-2022/Policy dated 14.07.2022]
For further details related to 'Bid Security' Bidders are requested to please connect para no 23 of the tender documents.
Bidders are requested to refer to para no 9 of tender document [Para 41 & 42 of Part II Standard General Conditions of Contract for "Variations in extent of Contract" of GCC 2022]
In case Agency desires submission of Bid Security in the form of Bank Guarantee, then please refer to para no 23(3) of Instruction to Tenderers for e- tenders, chapter I for further guidance. [Clause 5.0 of Part I of GCC 2022]
Bidders may also upload any relevant document as deemed fit.
Due to inbuilt rate of Delhi schedule of Rates [Vol.-2]-2021 of Central Public Works Department, GST has been taken into consideration @ 12% upon items of Delhi schedule of Rates [based on CPWD DSR-2021 ver-2] during assessment of this instant tender. Tenderer should quote rate inclusive of applicable GST.
Participants tenderer(s) are requested to go through the Railway Board letter no.2022/CE-I/CT/GCC-2022/POLICY/Pt.I(E-3320424) Dtd.13.03.2026 Indian Railways Standard General Conditions of Contract, April 2022 (Advance Correction slip No.11) which is enclosed in documents.
At Belvedere Park officer's Enclave, New Alipore Railway Officer's Colony and Burn standard colony [14 Alipore Avenue and 26 Raja Santosh Road] : Inside thorough repairs of different flats, bunglows in connection with change of occupation and its other ancillary works under Assistant Engineer/Works/II/Sealdah.
TN-54-26-27~ER
TN-54-26-27
Open
Works - General
8 Months
Kolkata, West Bengal
₹0
₹1.3 L
19 Jun 2026
22 May 2026
5 Jun 2026
173 items across 2 schedules · ₹9,13,333.63 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil. | cum | 5 | 286.85 | 1,434.25 |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | cum | 5 | 253.95 | 1,269.75 |
| 3 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. | cum | 4 | 2,161.2 | 8,644.8 |
| 4 | With Chlorpyriphos E.C. 20% with 1% concentration | Metre | 300 | 35.75 | 10,725 |
| 5 | Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same. | Metre | 50 | 257.55 | 12,877.5 |
| 6 | 1:1.5:3 (1 Cement: 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 8 | 7,783.65 | 62,269.2 |
| 7 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 2 | 7,365.15 | 14,730.3 |
| 8 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 1 | 8,364.2 | 8,364.2 |
| 9 | 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 3 | 10,185.05 | 30,555.15 |
| 10 | cum | 2 | 10,719.3 | 21,438.6 | |
| 11 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 40 | 307.95 | 12,318 |
| 12 | Suspended floors, roofs, landings, balconies and access platform | Sqm | 25 | 766.55 | 19,163.75 |
| 13 | Shelves (Cast in situ) | Sqm | 50 | 766.55 | 38,327.5 |
| 14 | Lintels, beams, plinth beams, girders, bressumers and cantilevers | Sqm | 25 | 608.35 | 15,208.75 |
| 15 | Under 20 cm wide | Metre | 20 | 181.9 | 3,638 |
| 16 | Thermo-Mechanically Treated bars of grade Fe-500D or more. | Kg | 80 | 89.65 | 7,172 |
| 17 | Thermo-Mechanically Treated bars of grade Fe-500D or more. | Kg | 450 | 89.65 | 40,342.5 |
| 18 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 3 | 6,658.25 | 19,974.75 |
| 19 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 2 | 8,288.35 | 16,576.7 |
| 20 | Cement mortar 1:4 (1 cement :4 coarse sand) | Sqm | 20 | 1,018.05 | 20,361 |
| 21 | Area of slab upto 0.50 sqm | Sqm | 5 | 4,679.35 | 23,396.75 |
| 22 | Area of slab over 0.50 sqm | Sqm | 25 | 4,425.35 | 1,10,633.75 |
| 23 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 650 | 1,063.45 | 6,91,242.5 |
| 24 | Kiln seasoned and chemically treated hollock wood | cum | 1 | 74,199.7 | 74,199.7 |
| 25 | 30 mm thick shutters | Sqm | 30 | 2,333.5 | 70,005 |
| 26 | Kiln seasoned and chemically treated hollock wood | Sqm | 2 | 2,039.8 | 4,079.6 |
| 27 | 4 mm thick glass pane (weight not less than 10kg/sqm). | Sqm | 30 | 1,897.1 | 56,913 |
| 28 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 30 | 2,818.5 | 84,555 |
| 29 | 25 mm dia | Metre | 15 | 482.3 | 7,234.5 |
| 30 | Fixed to steel windows by welding | Kg | 350 | 181 | 63,350 |
| 31 | With 12 mm mild steel U beading | Sqm | 50 | 812.4 | 40,620 |
| 32 | 250x16 mm | Each | 20 | 165.9 | 3,318 |
| 33 | 100X58X1.90 mm | Each | 80 | 86.15 | 6,892 |
| 34 | 250x10 mm | Each | 15 | 374.35 | 5,615.25 |
| 35 | 150x10 mm | Each | 15 | 232.3 | 3,484.5 |
| 36 | 100x10 mm | Each | 15 | 160.3 | 2,404.5 |
| 37 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. | Each | 10 | 723.8 | 7,238 |
| 38 | Providing and fixing bright finished brass night latch of approved quality including necessary screws etc. complete. | Each | 10 | 1,004.8 | 10,048 |
| 39 | 50 mm | Each | 30 | 306.4 | 9,192 |
| 40 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. | Each | 10 | 109.6 | 1,096 |
| 41 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. | Each | 7 | 1,025.65 | 7,179.55 |
| 42 | Size 50 mm | Each | 20 | 286.3 | 5,726 |
| 43 | 125 mm | Each | 15 | 226.5 | 3,397.5 |
| 44 | Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. | Metre | 20 | 702.6 | 14,052 |
| 45 | 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. | Sqm | 16 | 3,496.75 | 55,948 |
| 46 | 1.5 mm thick | Sqm | 60 | 890.55 | 53,433 |
| 47 | Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of the Engineer-in- Charge | Sqm | 10 | 1,982.7 | 19,827 |
| 48 | With 12 mm mild steel U beading | Sqm | 40 | 1,051.75 | 42,070 |
| 49 | 12mm thick commercial ply conforming to IS : 1328 BWR type | Sqm | 20 | 1,084.6 | 21,692 |
| 50 | Casement window double panels with S.S. friction hinges (300 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 +/- 0.2 mm and single glazing bead of appropriate dimension. (Area of window above 0.75 sqm upto 1.50 sqm). | Sqm | 10 | 9,635.4 | 96,354 |
| 51 | Providing and fixing 6mm thick both sides Pre-laminated cement bonded wood particle board as per IS : 15786:2008 of approved brand and shade with suitable full threaded steel screws etc. on the backing of racks, drawer, cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge. | Sqm | 20 | 902.55 | 18,051 |
| 52 | Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineer-in-charge.(Payment of providing and fixing auto closing hinges shall be paid separately) | Sqm | 10 | 2,563.75 | 25,637.5 |
| 53 | Providing and fixing 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand boxes,shelves,racks,almirah,cupboard and drawer etc. including necessary nails,screws etc. complete as per direction of Engineer-in-charge. | Sqm | 80 | 2,339.6 | 1,87,168 |
| 54 | 200 mm | Each | 80 | 153.15 | 12,252 |
| 55 | Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge. | Each | 70 | 226.75 | 15,872.5 |
| 56 | Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per directions of Engineer- in- charge. | Set | 20 | 749.7 | 14,994 |
| 57 | Providing and fixing ready made 304 grade stainless steel Modular kitchen basket and accessories such as right angle basket (Plain Cup & Saucer, plant, Partition, Bottle rack, Thali, Cutlery) kitchen utensil basket, Dinner set basket, kitchen grain basket, Multipurpose basket as per site requirement including finishing (wherever required) and fittings. The same shall be fixed with necessary stainless steel nuts & bolts, Stainless Steel screws & telescopic channel etc. as per direction of Engineer-in-charge. (For payment purpose only weight of Stainless steel basket shall be considered excluding weight of all fixing accessories such as nuts, bolts, fasteners telescopic basket channels etc. Payment of providing and fixing telescopic channel shall be paid separately) | Kg | 50 | 423.7 | 21,185 |
| 58 | Providing and fixing 2mm thick 16 to 19mm wide PVC edge binding tape of approved quality for cupboard/wardrobe shutters including necessary synthetic resin hot pressed to edges on binding machine etc. complete as per directions of Engineer- in-charge. | Metre | 200 | 38.45 | 7,690 |
| 59 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 250 | 93.05 | 23,262.5 |
| 60 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. | Sqm | 6 | 9,397.35 | 56,384.1 |
| 61 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). | Kg | 25 | 612.25 | 15,306.25 |
| 62 | 1:4 (1 cement : 4 coarse sand) | Sqm | 40 | 937 | 37,480 |
| 63 | 40 mm thick with 20 mm nominal size stone aggregate | Sqm | 25 | 545 | 13,625 |
| 64 | Medium shade pigment using 50% white cement 50% Grey cement | Sqm | 30 | 1,160 | 34,800 |
| 65 | Acid and alkali resistant tile | Sqm | 10 | 1,515.45 | 15,154.5 |
| 66 | Acid and alkali resistant tile | Sqm | 10 | 1,637.7 | 16,377 |
| 67 | 25 mm thick | Sqm | 35 | 1,706.6 | 59,731 |
| 68 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. | Sqm | 8 | 2,038.55 | 16,308.4 |
| 69 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. | Sqm | 150 | 1,142.8 | 1,71,420 |
| 70 | Size of Tile 600x600 mm | Sqm | 750 | 1,416.65 | 10,62,487.5 |
| 71 | 110 mm diameter | Metre | 40 | 319.75 | 12,790 |
| 72 | 75x75x75 mm | Each | 14 | 141.55 | 1,981.7 |
| 73 | 110 mm bend | Each | 20 | 132 | 2,640 |
| 74 | 110 mm | Each | 26 | 309.5 | 8,047 |
| 75 | 12.5 mm thick tapered edge gypsum moisture resistant board | Sqm | 60 | 1,300.5 | 78,030 |
| 76 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 32 | 671.55 | 21,489.6 |
| 77 | 1:6 (1 cement: 6 fine sand) | Sqm | 150 | 282 | 42,300 |
| 78 | 1:3 (1 cement: 3 fine sand) | Sqm | 40 | 374.15 | 14,966 |
| 79 | 1:3 (1 cement : 3 fine sand) | Sqm | 50 | 253.05 | 12,652.5 |
| 80 | Water thinnable cement primer | Sqm | 400 | 64.45 | 25,780 |
| 81 | New work (Two or more coats applied @ 3.84 kg/10 sqm) | Sqm | 120 | 97.6 | 11,712 |
| 82 | Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm | Sqm | 2250 | 158.95 | 3,57,637.5 |
| 83 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture | Sqm | 400 | 144.9 | 57,960 |
| 84 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture | Sqm | 250 | 140.05 | 35,012.5 |
| 85 | Two or more coats on new works including a coat of wood filler | Sqm | 63 | 368.3 | 23,202.9 |
| 86 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | Sqm | 250 | 123.85 | 30,962.5 |
| 87 | Two coats | Sqm | 1800 | 116.05 | 2,08,890 |
| 88 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | Sqm | 2500 | 20.85 | 52,125 |
| 89 | One or more coats on old work | Sqm | 150 | 86.55 | 12,982.5 |
| 90 | One or more coats on old work | Sqm | 2500 | 50.6 | 1,26,500 |
| 91 | Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface | Sqm | 500 | 108.6 | 54,300 |
| 92 | Orissa pattern W.C Pan of size 580x440 mm | Each | 10 | 3,850.65 | 38,506.5 |
| 93 | 3 mm thick | Sqm | 200 | 534.1 | 1,06,820 |
| 94 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) | cum | 8 | 2,007.1 | 16,056.8 |
| 95 | In cement mortar | cum | 3 | 1,698.45 | 5,095.35 |
| 96 | Of area 3 sq. metres and below | Each | 70 | 118.3 | 8,281 |
| 97 | Of sectional area 40 square centimetres and above | cum | 2 | 3,674.5 | 7,349 |
| 98 | For thickness of tiles 10 mm to 25 mm | Sqm | 390 | 60.5 | 23,595 |
| 99 | 15 mm to 40 mm nominal bore | Metre | 40 | 124.1 | 4,964 |
| 100 | Above 40 mm nominal bore | Metre | 40 | 134.25 | 5,370 |
| 101 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | Sqm | 30 | 45.05 | 1,351.5 |
| 102 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. | Sqm | 22 | 46.5 | 1,023 |
| 103 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in- charge, beyond 50 m initial lead, for all leads including all lifts involved. | cum | 60 | 219.35 | 13,161 |
| 104 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer | Each | 15 | 3,459.05 | 51,885.75 |
| 105 | 510x1040 mm bowl depth 250 mm | Each | 8 | 6,008.45 | 48,067.6 |
| 106 | 10 litre capacity - White | Each | 15 | 1,023.05 | 15,345.75 |
| 107 | White solid plastic seat with lid | Each | 15 | 586.55 | 8,798.25 |
| 108 | 32 mm dia | Each | 30 | 90.95 | 2,728.5 |
| 109 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | Each | 15 | 1,411.15 | 21,167.25 |
| 110 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. | Each | 15 | 942.15 | 14,132.25 |
| 111 | C.P. brass | Each | 10 | 680.8 | 6,808 |
| 112 | Sand cast iron S&S pipe as per IS: 1729 | Metre | 100 | 1,018.05 | 1,01,805 |
| 113 | Sand cast iron S&S as per IS - 1729 | Each | 20 | 412.95 | 8,259 |
| 114 | Sand cast iron S&S as per IS - 1729 | Each | 20 | 1,038.75 | 20,775 |
| 115 | Sand cast iron S&S as per IS - 1729 | Each | 20 | 399.6 | 7,992 |
| 116 | Sand Cast Iron S&S as per IS: 1729 | Each | 20 | 1,403.45 | 28,069 |
| 117 | 75 mm dia | Metre | 100 | 442.2 | 44,220 |
| 118 | Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms | Each | 50 | 325.1 | 16,255 |
| 119 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. | Each | 50 | 146.3 | 7,315 |
| 120 | 20 mm nominal dia Pipes | Metre | 200 | 325.1 | 65,020 |
| 121 | 25 mm nominal dia Pipes | Metre | 100 | 408.55 | 40,855 |
| 122 | 20 mm nominal dia Pipes | Metre | 160 | 513.75 | 82,200 |
| 123 | 40 mm nominal dia Pipes | Metre | 130 | 559.2 | 72,696 |
| 124 | 50 mm nominal dia Pipes | Metre | 60 | 811.85 | 48,711 |
| 125 | 25 mm dia nominal bore | Metre | 50 | 417.95 | 20,897.5 |
| 126 | 40 mm dia nominal bore | Metre | 50 | 558.35 | 27,917.5 |
| 127 | 50 mm dia nominal bore | Metre | 50 | 654.2 | 32,710 |
| 128 | 40 mm nominal bore | Each | 20 | 707.3 | 14,146 |
| 129 | 50 mm nominal bore | Each | 20 | 878.25 | 17,565 |
| 130 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | Litre | 8000 | 9.7 | 77,600 |
| 131 | 15 mm nominal bore | Each | 70 | 594.75 | 41,632.5 |
| 132 | Making hole up to 20x20 cm and embedding pipes up to 150 mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement : 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) including disposal of malba. | Metre | 20 | 198.4 | 3,968 |
| 133 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | Kg | 100 | 433.95 | 43,395 |
| 134 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | Kg | 200 | 531.8 | 1,06,360 |
| 135 | With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | Sqm | 60 | 1,019.8 | 61,188 |
| 136 | Upto 5mm depth and 5 mm width | Metre | 40 | 85.25 | 3,410 |
| 137 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. | Sqm | 70 | 516.6 | 36,162 |
| 138 | Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) | cum | 2 | 7,510.75 | 15,021.5 |
| 139 | Providing and mixing integral crystalline admixture for water proofing treatment to RCC structures like basement raft, retaining walls, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc. at the time of transporting of concrete into the drum of the ready-mix truck , using integral crystalline admixture @0.80% (minimum) to the weight of cement content per cubic meter of concrete) or higher as recommended by the manufacturer's specification in reinforced cement concrete at site of work. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e. by reducing permeability of concrete by more than 90%, compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure. The crystalline admixture shall be capable of self- healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. | Kg | 15 | 332.4 | 4,986 |
| 140 | Providing and applying antifungal wash treatment using 3% solution of sodium pentachlorophenate, of reputed brand and manufacturer, on cleaned sand stone surface at desired locations as per direction of Engineer-in-charge (The rate is inclusive of all materials & labours involved except scaffolding). | Sqm | 50 | 64.1 | 3,205 |
| 141 | Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.25.2) For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm. (i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement. | Sqm | 10 | 3,377.5 | 33,775 |
| 142 | Providing, erecting, laying and fixing in position in 3.5 to 4 mm thick bamboo mat corrugated sheet (BMCS) as per IS: 15476-2004 in roofing with self drilling screws along with EPDM washers complete or with galvanized iron J or L hooks 8mm dia G.I. plain and bitumen washers etc, all complete as per direction of Engineer-in-Charge. | Sqm | 7 | 5,188.65 | 36,320.55 |
| 143 | Providing and fixing in position ridges of 3.5 to 4 mm thick bamboo mat ridge cap (BMRC) as per IS: 15476-2004 in roofing with self drilling screws along with EPDM washers complete or with galvanized iron J or L hooks 8mm dia G.I. plain and bitumen washers etc, all complete as per direction of Engineer-in-Charge. | Metre | 7 | 4,152.45 | 29,067.15 |
| 144 | Providing and fixing at all height false ceiling of 4mm thick phenol bonded Bamboo Mat board (595x595mm) conforming to IS:13958-1994 including providing and fixing of frame work made of GI angle 25x25x0.4 mm thick all around suitably fixed to wall with the help of dash fastener and hanger frame (600x600 c/c) made GI slotted Tee having powder coating on bottom side (30x25x0.3 mm thick for main member & 25x25x0.3 mm for cross member) connected to ceiling with 2.64mm GI wire and anchor fastener at every junction and also including cost of making openings for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed all complete as per direction of Engineer-in-charge. | Sqm | 10 | 3,375.5 | 33,755 |
| 145 | 9mm thickness | Sqm | 12 | 4,459.7 | 53,516.4 |
| 146 | Providing and fixing factory made Kitchen Cabinet Shutter/Partition 20 mm nominal thickness of approved shade, quality and make, made from rigid foam sheets (Single extruded) having density 600 Kg/cum and laminated on both side by laminate Sheet/PVC foil lamination. The exposed edges shall be sealed with PVC edge beading of same shade and colour. The shutter shall be fire retardant having necessary screw holding capacity. Shutter shall be fixed to frame using approved hinges with necessary stainless steel screws, all complete as per direction of Engineer-in-charge. | Metre | 45 | 399.9 | 17,995.5 |
| 147 | Providing and fixing factory made Kitchen Cabinet Shutter/Partition 20 mm nominal thickness of approved shade, quality and make, made from rigid foam sheets (Single extruded) having density 600 Kg/cum and laminated on both side by laminate Sheet/PVC foil lamination. The exposed edges shall be sealed with PVC edge beading of same shade and colour. The shutter shall be fire retardant having necessary screw holding capacity. Shutter shall be fixed to frame using approved hinges with necessary stainless steel screws, all complete as per direction of Engineer-in-charge. | Sqm | 15 | 4,767.8 | 71,517 |
| 148 | 50mm average thickness | Sqm | 15 | 211.55 | 3,173.25 |
| 149 | Bars above 12 mm diameter | Metre | 15 | 13.35 | 200.25 |
| 150 | SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer | Sqm | 35 | 117.75 | 4,121.25 |
| 151 | 50mm thick in Grade M 25 with cement content not less than 330 kg per cum | Sqm | 15 | 1,073.45 | 16,101.75 |
| 152 | Providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of "L" shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants as approved by Engineer-in-charge. | Sqm | 20 | 820.8 | 16,416 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .