Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹13.0 LAccepted-Finance | 1 | Accepted-Finance L1 | |
| 2 | 2₹13.0 L+₹3,538.26 (0.27%)Accepted-Finance | 2 | Accepted-Finance L2 |
Tender Value
₹16.3 L
EMD Value
₹32,522
Closing Date
26 Mar 2024, 3:00 pmClosed
Executive Engineer (PRI), N MAD
Office of the Executive Engineer (PRI), N MAD
Construction of Sitting Benches near main Road form Helipad Ground to STB Lodge Mayabunder Gram Panchayat, Mayabunder.
2024_RDPRI_14019_1
108/EE/PRI/MB/23-2024
Open Tender
Civil Works - Others
Works
180 days
Mayabunder
Refer tender Document
5 documents required · 5 mandatory
₹500
Executive Engineer (PRI), N MAD
₹32,522
28 Mar 2024
15 Mar 2024
26 Mar 2024
15 Mar 2024
26 Mar 2024
15 Mar 2024
Amount
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
All kinds of soil.
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
1:4:8 (1 Cement : 4 Pulverised sand (zone-III) derived from natura sources : 8 graded stone aggregate 40 mm nominal size derived from natura sources)
1:3:6 (1 Cement : 3 Pulverised sand (zone-III) derived from natura sources : 6 graded stone aggregate 40 mm nominal size derived from natura sources)
Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete.
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
1:1.5:3 (1 cement : 1.5 Pulverised sand (zone-III) derived from natura sources: 3 graded stone aggregate 20 mm nominal size derived from natura sources).
Centering and shuttering including strutting, propping etc. and removal of form for:
Foundations, footings, bases of columns, etc. for mass concrete
Columns, Pillars, Piers, Abutments, Posts and Struts
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
Thermo-Mechanically Treated bars of grade Fe-500D or more.
12 mm Cement Plaster of mix:
1:4 (1 Cement :4 River Sand)
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.
G.I. pipes
Finishing walls with water proofing cement paint of required shade :
New work (Two or more coats applied @ 3.84 kg/10 sqm)
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
Two or more coats on new work
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
Manufacturing or Fabrication and supplying of street light pole made out of 100 mm dia class B ISI standard GP Pipe 3 mtrs long earth stud and necessary GI reducer/ coupling fixed with 80 mm dia class B GI Pipe 1.5 mtrs long bended to 120 Degree 40 mm dia GI of 0.6 mtrs. long for fixing light fitting along with necessary clamp and 300mmx12mm thick MS Base Plate welded to bottom of pole along with nuts and bolts with painting of one coat of mettlic primer and two coats of synethetic enamel paint, etc as required.
BHAGWAN SINGH
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .