REPAIR TO FENCING AND MISC BR WORKS AT MIL STN NABHA AND SANGRUR UNDER GE(S) PATIALA

Amount

Excavating in post holes (or similar holes) each n exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cm, complete all as specified and directed by Engr-in-charge.

Dismantling posts or struts (wood,steel,or RCC) any section, including taking out embedded portion including demolition of concrete foundation and removal of waste material and making good disturbed ground complete all as directed.

M & L for PCC 1:3:6, type B-1, using 40mm graded stone aggregate as in foundation for post holes complete all as specified and directed by Engr-in-charge.

S & F Joist, channel, angle, or tee sections, fixed independently, without connecting plates,Gde Fe-410-S as in fencing post / struts incl necessary flat iron,10mm dia MS round bars,drilling holes and binding etc. complete all as specified and directed.

Dismantling Chain link fencing of any size and any dia of wire, complete all as specified and directed.

S&F in repair Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia dia barbs at 75mm spacing and straining and fixing to any type standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc., complete all as directed by Engr-in-charge. Note : Each line wire to be measured

Restraining, resecuring including making good staples of Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia dia barbs at 75mm spacing and provisin of galvanised mild steel wire, staple or steel pins etc as directed by Engr-in-charge.

Preparing new steel surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed by Engr-in-charge.

Removing excavated material (soils & sludge) exc 250m but not exc 500m and deposited at a level not exc 1.50m high from base, complete all as specified and directed

Demolition of Brick work including all quoins and arches pillars etc built in cement mortar or cement lime mortar and removal of unserviceable material from site complete all as specified and directed.

M&L for brick work in cement mortar (1:6) using sub class 'B' old size bricks staight or curved on plan exc 6.0 m mean raidus complete all as specified and directed

All as per serial item 11.00 above but except bricks.

Taking down cement plaster or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. and removal of debris from site complete all as specified and as directed

M & L for rendering 15mm thick cement plaster in cement mortar 1:6 on fair faces of brick or concrete surfaces on walls etc, finished even and smooth without using extra cement, complete all as specified and directed.

Preparation of new plastered or unplastered surfaces of walls etc and applying two coat of cement base paint over a coat of chalk whiting (as primer) complete all as specified and as directed.

Preparation of old plastered or unplastered surfaces of walls etc and applying one coat of cement base paint complete all as specified and as directed.

Demolition of cement cocrete of any description and in any position not otherwise specifically provided for, including removal of debris from site, complete all as specified and as directed by Engineer in charge.

M & L 75 mm thick PCC 1:4:8, type D-2, using 40mm graded stone aggregate as in foundation, mass filling or sub base of foors complete all as specified and directed by Engr-in-charge.

Chequered cement concrete tiles With mixture of white and grey cement in equal proportion and no pigments, machine pressed, of size 20cm x 20cm x 25mm thick or any larger size upto 30cm x 30cm x 25mm as approved by Engineer in charge laid over 20mm thick cement screed in CM 1:4, complete all as specified and as directed

Supply only MS Galvanized chain link fencing, any size or any type, complete all as specified and directed.

Fixing only chain link fencing including line, wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire, complete all as specified and directed.

Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long, complete all as specified and directed.

Mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending and binding, complete all as specified and directed.

Arneja Builders

FAVOURITE ENGINEERS

M/s Pawan Kumar Goyal