11/KM/ Kalimpong Town dt.05.01.2026

Earthwork in excarvation of foundation of structures as per drawing and technic specification , including setting out, removing, spreading or stacking of spoils within a lead of 150m. As directed and including trimming the sides of the trenches, leveling, dressing and ramming the bottom, and backfilling with approved material as per direction of Engineer-in- Charge.(a) In ground floor including roof.I. In all sorts of soil excluding marshy soil & rocks (soft or hard) by manual means.a) upto 3 m depth (i) Without pumping out water and shoring as required.

Labour for laying 150 mm to 200 mm boulder soling including rough dressing hand packing and ramming down small pieces in the interstics including rolling and preparing the bed to proper level and filling up all joints with sandy clay or earth,without rolling but including ramming.

Cement concrete with 30 mm down graded shingles excluding shuttering.N.B. Variety

Hire and labour charges for shuttering with centering and necessary stagingupto 4 m using approved stout props and thick hard wood planks of approvedthickness with required bracing for concrete slabs, beams and columns,lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)

Plum concrete work with 40 % cement concrete with 30 mm down graded stone metal and 60 % stone boulder of size 150 mm and above, placed in position as directed excluding shuttering if any.(1:3:6) proportion

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (i) With 1:4 cement mortar (b) 15 mm thick plaster

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mmnominal size)excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at inter-section, complete as per drawing and direction.

Labour welfare cess @1%