GE(P)AF/GUR-04/2021-22 CERTAIN REPAIR AND REPLACEMENT TO B R WORKS TO INTERNAL WATER SUPPLY, SANITARY ITEMS, DAY TO DAY AND PETTY REPAIR AND CONNECTED B R WORKS AT AF STN GURGAON UNDER GE (P) AF GURGAON

Amount

Schedule-A

M&L for Repair to high/low level flushing cistern by adjusting the float valve and stop leakage of PVC connection and PVC/CI bend including replacing of rubber washer, check nuts, etc for any type of flushing cistern complete all as specified and as directed by Engineer-in-Charge.

Taking down and refixing PVC flushing cistern, flush handle, coupling, waste pipe, grating, PVC connection, flush pipe, seat cover etc complete all as specified and as directed by Engineer-in-Charge.

Taking down and refixing of wash basin, EWC, IWC, urinal, Sink with drainage board etc incl white cement and gas kit complete all as specified and as directed by Engineer-in-Charge.

S&F in repair MS angle of size (35x35x5) mm and 350 mm long for bash basin or sink wash embedded in brick wall and making good of destroed surface complete all as specified and as directed by Engineer-in-Charge.

M&L for Petty repairs to taking down steel/wood window/ventilator frame with shutters, repairing, tightening of hinges or changing the position of hinges adjustment of tower bolts sliding bolt etc, replacement of minors such as screws, clamps, cleats etc and refixing in the same opening (no extra payment will be paid for external window shutters of upto 2nd floor) complete all as specified and as directed by Engineer-in-Charge.

M&L for Petty repairs to taking down wooden/PVC door shutters, repairing, tightening of hinges or changing the position of hinges adjustment of tower bolts sliding bolt etc ,replacement of minor items such as screws, cleats, clamps etc and refixing on the same opening (no extra payment will be paid for welding of new hinges on steel chowkat frame) complete all as specified and as directed by Engineer-in-Charge.

M&L for Petty repairs to taking down aluminium door frames with shutters exc 1.5 Sqm and n.exc 4.00 sqm of any description, tightenining of all screws repair of floor spring , necessary fittings and refixing in the same opening etc complete all as specified and as directed by Engineer-in-Charge.

M&L for Petty repairs to Taking down aluminium window/ventilator shutters n.exc 1.5 sqm of any description,tightenining of all screws replacement of hinges , necessary fittings and refixing in the same opening complete all as specified and as directed by Engineer-in-Charge.

Easying of steel doors and steel windows shutters for easy closing/opening , tightening of hinges, or changing the postion of hinges, adjustment of tower bolts, sliding bolts with new screw etc incl welding complete all as specified and as directed by Engineer-in-Charge.

M&L for welding in repair, exc 2.5 cm but n.exc 5 cm in length thickness of metal to be welded exc 20mm but n.exc 25mm all as specified and directed by Engineer-in-Charge.

S&F in repair float valve of PTMT with polythene ball and rod for 25mm dia pipe complete all as specified and as directed by Engineer-in-Charge.

S&F in repair float valve of PTMT with polythene ball and rod for 20mm dia pipe complete all as specified and as directed by Engineer-in-Charge.

S&F in repair float valve of PTMT with polythene ball and rod for 15 mm dia pipe complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 60 cm long PVC connection with two nos PTMT nut and rubber washers suitable for 15mm bore GI Pipe of existing one complete all as specified and as directed by Engineer-in-Charge.

S&F in repair PTMT flush handle with adjustable lever and hook for low level flushing system complete all as specified and as directed by Engineer-in-Charge.

S&F in repair PTMT bib tap 15mm dia with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule with check nut 15mm bore, complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 10ltr capacity PVC valveless syphonic action type flushing systern low level white with inlet ball valve ,float & handle including brackets complete all as specified and as directed by Engineer-in-Charge.

S&F in repair PTMT waste coupling 31/32mm bore of discharge (Half or full threaded) Min weight 45 gms, complete all as specified and as directed by Engineer-in-Charge.

S&F repair in of PTMT waste pipe 31/32 mm bore 80 cm long complete all as specified and as directed by Engineer-in-Charge.

S&F in repair PTMT Urinal waste pipe of standard pattern, 80 cm long, 50 mm diacomplete all as specified and as directed by Engineer-in-Charge.

S&F in repair PVC tank cover for 500/1000 Ltrs. complete including locking arrangement complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Rotational moulded Polyethylene (HDPE) Water Storage Tank 500 LITRE Capacity (Cylindrical Vertical with Closed Top), Black in Colour, Three Layered Construction, hoisted and fixed in Position all specified in MES Schedule Part-I, including tank nipple, union and Lowering of unserviceable Water Storage Tank with Float Valve of any description complete all as specified and directed by Engineer in charge.

S&F in repair Rotational moulded Polyethylene (HDPE) Water Storage Tank 1000 LITRE Capacity (Cylindrical Vertical with Closed Top), Black in Colour, Three Layered Construction, hoisted and fixed in Position all specified in MES Schedule Part-I, including tank nipple, union and Lowering of unserviceable Water Storage Tank with Float Valve of any description complete all as specified and directed by Engineer in charge.

Dismantling of cast iron , concrete, asbestos, PVC pipes of any dia and discription from trenches or with walls etc complete all as specified.

S&F in repairs PVC pipes single socketed in any length with rubber ring joints fixed to wall ( 110mm bore) including flat iron claimp for proper fixing complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs PVC pipes single socketed in any length with rubber ring joints fixed to wall (75mm bore) including flat iron claimp for proper fixing complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs PVC bends 110mm dia complete all as specified by Engineer-in -Charge

S&F in repairs PVC bends 75mm dia complete all as specified and directed.

S&F in repair plastic WC seat cover of any colour for pedestial pan , closed pattern with flat bottom & cover including MS chromium plated ,aluminium hinging devices complete all as specified and as directed by Engineer-in-Charge.

S&F for steel water tubing 15mm bore, galvanised, medium grade with and including provision of all fittings of ISI marked and connected complete incl taking down old GI pipe all as specified and as directed by Engineer-in-Charge.

S&F for steel water tubing 20mm bore, galvanised, medium grade with and including provision of all fittings of ISI marked and connected complete incl taking down old GI pipe all as specified and as directed by Engineer-in-Charge.

S&F in repair brass spindle for 15mm bib cock heavy duty complete all as specified and as directed by Engineer-in-Charge.

S&F in repair brass spindle for 15mm pillar cock heavy duty all as directed by Engr in Charge.

S&F in repair 15mm dia concealed stop cock chromium plated with long screwed down high pressure with cruteh or butterfly handle screwed both end for iron pipe complete all as specified and as directed by Engineer-in-Charge.

S&F in repair bib taps 15mm bore long body cast copper alloy fancy type chormium plated butter fly handle screwed down including complete all as specified and as directed by Engineer-in-Charge.

S&F in repair pillar taps 15mm bore cast copper alloy fancy type chormium plated butter fly handle screwed down including complete all as specified and as directed by Engineer-in-Charge.

S&F in repair angle/ stop valves 15mm bore (for iron pipe) fancy type chromium plated screwed down high pressure with butterfly handle screwed both ends complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 75 mm dia fancy type shower roses brass chromium plated with C P arms of length upto 60 cm for 15mm bore GI pipe. complete all as specified and as directed by Engineer-in-Charge.

S&F in repair brass CP mixer for mixing hot and cold water screwed down for iron pipe and fixed for 15mm bore pipe complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement Sink with drainage board made of stainless steel 1 mm thick kitchen or laboratories with plugs, washer and wastes pipe, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915x 460x bowl size 410x330x160mm complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement Sink without drainage board made of stainless steel 1 mm thick kitchen or laboratories with plugs, washer and wastes pipe, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size bowl size 410x330x160mm complete all as specified and as directed by Engineer-in-Charge.

Cleaning and removing all scale and dirt, etc, from Overhead tank (R.C.C./PVC) and from mouths of circulating pipes etc capacity exc 500 and not exc 100Ltr each (Note - Over head tank cleaning each quarter/ two time in contract period) Date of cleaning in white paint to be marked on the tank in 50mm ht letters.complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs vitreous China squatting pan 'orrisa' pattern white colour of size 580x440mm with integral foot rests including provision of lime concrete including P traps complete all as specified and as directed by Engineer-in-Charge.

S&F in repair wash down water closet (pedestal pattern) of any colour including fixing of bolts complete all as specified and as directed by Engineer-in-Charge.

S&F in repair for vitreous china wash basin hand white flat backsize 550x400 including cutting for and pinning in ends of brackets including fixing of 32 mm low dencity polylethyne pipes (LDPE)of pressure rating 6kg/cm2,cupling ,PVC connection with 15 mm dia PTMTcheknuts ,brackets all complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs vitreous china coloured half stall urinal brass chromium plated brackets , fitting and waste coupling, CP bottle trap , urinal spreder , PVC connection etc complete all as specified and as directed by Engineer-in-Charge.

S&F stainless steel wire cloth with 8% nickle . 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple complete all as specified and directed by Engr-in-Charge.

S&F in repair ISI marked hydraulically regulated door closer aluminium (extruded section) body type complete suitable for door shutter width upto 1.50 mtr and weight between 61 to 80 kg complete all as specified and as directed by Engineer-in-Charge.

S&F in repair MS Helical door spring including roller & roller plate complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 4mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 1 Sqm in each pane with glazing pins incl hacking out old broken galss (any thickness size, quality) complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 4mm thick figured or pin headed glass ordinary quality and glazing with oil putty in square n exc 0.5Sqm in each pane with glazing pins all as specified and directed by Engineer-in-Charge

S&F in repair rubber beading heavy duty good finished fixed around the glass complete all as specified and as directed by Engineer-in-Charge.

S&F in repair double action floor spring hydraulically regulated made up to min 1.25 mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty & fixed, complete all as specified and as directed by Engineer-in-Charge.

S&F in repair aluminium alloy door seal 1m long fixed to wooden doors complete all as specified and as directed by Engineer-in-Charge.

S&F in repair, Mortice latch with two levers (vertical type), mild steel body and fixed (length of latch 100mm) complete all as specified and as directed by Engineer-in-Charge.

Demolition in cement concrete in any description and any position not other wise specified and provided as in ground floor and paving nexc. 15 cm thickness (below above ground floor ) all as directed by Engr-in-Charge.

M&L for providing 75 mm thick cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base of floor complete all as specified and directed by Engr-in-Charge.

M&L for 75 mm thick in PCC 1:3:6 type C-2 using 40mm graded aggregate as in Plinth protection including 6x10mm grove in every 3Mtr including bitumen mastic filling in joints complete all as specified and directed by Engr-in-Charge.

S&F in repair to 9 feet pully operated cloth drying system, aluminium anodised 20mm dia pipe, channel assembly, locking system to hide reope knot , ropes 4 mm dia HDPE double core& fitting materials etc complete all as specified and directed by Engr-in-Charge. Make:- Easy dry or other equivalent made as approved by GE.

Cutting and removing with the chiesel and taking out the roots of plants grown on the roof/wall and repair with cemnt mortar 1:3 with chemical for quick setting complete all as specified and as directed by Engineer-in-Charge.

Dismantling of wall/ floor tile including backing coat any description or any thickness led beded and pointed in any cement motar and removal to out of MD land complete all as specified and as directed by Engineer-in-Charge.

M&L for glazed ceramic colour designer concept glazed ceramic tiles in patches matching with existing tile 200x300x7mm or 450x350x 7mm size as in walls set and jointed in neat cement slurry over and including 10mm thick backing coat in cement mortar (1:3) and pointed in coloured cement to match for work on vertical surface such as skirting dado etc complete all as specified and as directed by Engineer-in-Charge.

M&L for joint free coloured non skid coloured ceramic tiles in patches matching with existing tile 7 to 8mm thick (squar / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white/coloured cement to match over and including 15 mm thick screed bed in cement mortar in (1:6) complete all as specified and as directed by Engineer-in-Charge.

M&L for vitrified tiles in patches matching with existing tile 7 to 8mm thick (squar / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white/coloured cement to match over and including 10 mm thick screed bed in cement mortar in 1:4 complete all as specified and as directed by Engineer-in-Charge.

M & L Granite (of any type) work 16-18mm thick (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platform, verticle surfaces and any position in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl screed bed 15 mm th in CM 1:6 incl chamfering and rounding of edges where required all as specified and directed by Engr-in-Charge.

M&L for 60 mm thick rubber moulded Machine pressed pre casted pressed cement concrete inter locking paver blocks glazed coloured up to 6mm on the top in any shape and size, strength not less than M-35 incl 20mm thick sand cushioning completed all as specified and as directed by Engr-in-Charge.

S&F in repair vertical blinds for windows/door/ventelator of any colour and pattern as approved including connected items ie. rod, hook etc and complete fitting all as specified and as directed by Engineer-in-Charge.

S&F in repair stainless steel 25mm thick tubular curtain rods fancy type with brackets ,stops, rollers etc all as specified and direced by Engr-in-Charge.

S & F in repair bracket/stops and roller for tubular courtain rods/ pelmets fancy type all as specified and direced by Engr-in-Charge.

S & F in repair stainless steel peg set hook rail 300 to 350 mm long having 6 to 8 prongs with 3 nos screws complete all as specified and directed by Engr-in-Charge.

S&F in repair stainless steel floor grating with hole or without hole all as specified and directed by Engr-in-Charge.

S&F Towel Ring 600mm long of stainless steel fixed with and including Chromium plated brass screws and wooden/plastic cleats all as specified and directed by Engr-in-Charge.

S&F Towel rack of size is 600mm long of stainless steel fixed with and including Chromium plated brass screws and wooden/plastic cleats all as specified and directed by Engr-in-Charge.

S&F in repair, stainless steel handle fabricated type, anodised 150mm size complete all as specified directed by Engr-in-Charge.

S&F in repair mild steel cold rolled medium weight butt hinges 100mm long complete all as specified directed by Engr-in-Charge

S&F as in repair two legged aluminium floor door stopper with rubber shoe 140mm long complete all as specified and directed.

S&F in repair 150mm stainless steel door bolts with hasp stapple (bolt type) and fixing clips of sheet cast of extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloycomplete all as specified and as directed by Engineer-in-Charge.

S&F in repair 150 mm stainless steel barrel tower bolts of extruded section and fixed to shutter complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 300mm dia Stainless steel sliding door bolts, Clip type with bright bolt not less than 12mm dia with a minimum of 6 bolts and nuts, four on bolt plate and two on stapple plate complete all as specified by Engineer-in -Charge.

S&F in replacement plate rack stainless steel made out of sheet not less than 1 mm thick, size 30 inch 36 inches 10 inche with bracket all necessary fittings all as specified and directed by Engr-in-Charge.

S&F in repair health faucet (brass) with hook & 1.5mtr tube all as specified and directed by Engr-in-Charge. Make : jainko/ shakti/prayag

S&F in repair jet spray brass with hook & 1.00 mtr tube all as specified and directed by Einr-in-Charge. Make : jainko/ shakti/prayag

S&F in repair 20 mm bore gun metal globe or gate valve with iron wheel heads screwed both ends for iron pipe complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 15 mm bore gun metal globe or gate valve with iron wheel heads screwed both ends for iron pipe complete all as specified and as directed by Engineer-in-Charge.

Taking down Chowkhats or frames n exc 1.5 sqm each without taking of shutter from the frame complete all as specifed and directed by Engr-in-Charge.

Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq m each without taking off shutters form the frame all as specified and directed by Engr-in-Charge.

Taking down shutter of any discription n.exc 1Sqm each complete all as specified and directed by Engr-in-Charge.

Taking down shutter of any discription exc 1Sqm and n exc 2 Sqm each complete all as specified and directed by Engr-in-Charge.

M&L for second class Hardwood 35 mmthickness, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified by Engr-in-Charge.

S&F factory made 30mm thick solid core Flush door shutter with block board with BWP plywood on both side all as specified directed by Engr in Charge.

M&L for second class hardwood 35mm thickness plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats all as specified and directed by Engr-in-Charge

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and wood grain printed PVC Sheet used 5mm thick x 15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beaading of 10mm x 10mm used instead of exposed portion of PVC sheet beading for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; supplying & fixing in the frame at site complete all as shown in sketch in SSR Pt-II and directed by the Engineer in Charge.

S&F factory made solid PVC door framing of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube incl fixing in opening as per specification and drawing as shown on page No 150 of SSR Part II complete all as specified and directed by the Engineer in Charge. .

S&F stainless steel wire cloth with 8% nickle . 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple complete all as specified and directed by Engr-in-Charge.

M & L for preparation of new wooden surfaces of any description not otherwise described, over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of pink wood primer all as specified and directed by Engineer-in-Charge.

S&F in repair 100mm long medium grade stain less steel but hinges bright polished fix to steel chowkhat with nut and bolt all as specified directed by Engr in Charge.

S&F 250mm long, 16mm dia stain less steel bright polished door sliding bolt hasp and staple type with fixing of clips 3 Nos with fixing with nut & bolt all as specified directed by Engr in Charge.

S&F in repair mild steel cold rolled medium weight butt hinges 100mm long complete all as specified directed by Engr-in-Charge.

S&F mild steel pressed handles, oval type, stove enamelled black 150mm long fancy type complete all as specified and as directed by Engineer-in-Charge.

S&F polyester powder coated aluminium frame/chowkhat for door shutter of section 101.0x44.4 mm of gauge 16 fixed in brick masonery or conrcrete work by necessary drilling and rawl plug aggangement etc incl S&F polyester powder powder coated aluminium door shutter top rain and middle rail of section 85x44.4 of 16 gauge and bottom rail of section 150x44.4 mm 16 gauge (all section of such type having arrangement for fixing glass/prelaminated board on one or both sides as required) incl aluminium fittings such handle (2 Nos each shutter), tower bolt, locks (mortise type lock) glazing clips, rubber packing, anodised aluminium snap beading screw, hinges type B-21 150mm long (3 Nos each shutter) etc and one door stopper two legged with each leaf (shutter) complete (Glass and prelaminated board to be measured separately under appropriate item of sch A) complete all as specified and directed by Engr-in-Charge (Make of aluminium section shall be hindalco/Jindal)

M&L, for 12 mm thick pre-laminated particle board, exterior grade, pre-laminated on both side with decorative choice laminations fixed between aluminium section with and including snap fitting aluminium clips of polyester powder coated along with the glass with rubber gasket, as in door shutters complete all as specified and directed by Engr-in-Charge.

S&F aluminium anodized grill DG 208 design as per approved pattern including aluminium beads etc complete all as specified and directed by Engr-in-Charge.

S&F polyester powder coated aluminium frame/chowkhat for window/ ventilator of section 63.5x38.1 mm of 16 guage fixed in brick masonery or conrcrete work by necessary drilling and rawl plug aggangement etc incl S&F polyster powder coated of any colour anodised aluminium window & ventilator shutters side hung type without sash bars aluminium with section 44.4x44.4mm of 16 guage including necessary jointing cleats, glazing clips, rubbers packing powder coated anodised aluminium snap beading, screw, powder coated aluminium anodised fittings such as peg stays 150mm long (1Nos), Hinges type B-21 100mm long (2Nos) suitable handle 1 Nos complete all as specified and directed by Engineer-in-Charge.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded all as specified and directed by Engr-in-Charge.

All as per item No 107 hereinbefore but without galzing bars.

M&L in repair fabrication of aluminium compositre panel of 4mm thick with .5 mm aluminium core/skin as a tap and bottom layer, middle ;ayer 3mm thick of polythincore (LDPE) and finally with PVDF coating 28 to 32 micron and joints filed with silicon sealant and including aluminium frame of section 37.5mm x 25mm x 1.6mm fixed on the wall/ columns as a cladding and on ceiling of steel structure/ RCC celing withscrew complete incl dismantling of old decayed panels all as directed and as per manufacture's instruction, coloured/texture pattern as diesided by Engr-in-Charge all as specified and as directed.

S&F in repair one piece square model water closet floor mounted Square Commode (White) S trap - white ceramic western commode (white) shape-Elongated type, size 685x360x720mm weight not less 20 Kg 'S' trap and slim seat cover & fitting as per Cera Cat Part No S1013164 or equivalent complete all as specified and directed by Engr-in-Charge.

S&F in repair 25mm dia curtain rails, mild steel, of anodised aluminuum alloy with fixing brackets, stops rollers all as specified and directed by Engr-in-Charge.

S&F single side writing informatory stainless steel reflective sign board size 4'x3' having with aluminium sheet base of 2 mm thickness having retro reflective tape base and font. Colour and matter of sign board will be furnished by Engr-in-Charge. The frame of sign board should be 2 " outer dia square Stailness steel pipe and having 2 legs of stainless steel square pipe 9' ling each of 2" outer dia swuare pipe the board should be grouted in PCC work of size 300x300x450 mm including taking down of existing all as specified and directed by Engr-in-Charge. (a) SS Sign Board = 4'x3' =12 sq ft. (b) Stainless steel post with f type shape 50 mm OD =m 9'x2= 18 R ft

M&L for polyester powder coated aluminium sliding cupboard shutter panel meduim weight aluminium section as Horizontal members size 63.5x38.10mm at 0.75 Kg/M and verticle member size 63.5x38.10 mm at 0.75Kg/M cupboard panel incluing clips, rubbers beading aluminium beading and sicing to the adjoining/ existing wall/ partition etc with all necessary fitting/ fizture etc complete all as spectified by ENgr-in-Charge incl aluminium frame/ chowkhat for sliding door shutter cupboard of section 101.0x44.44 mm of gauge 16 fixed to masonery/concrete surface (all section of such type having arrangement for fixing glass/prelaminated board on one or both sides as required) incl aluminium fittings such handle (1 Nos each shutter), tower bolt, locks (mortise type lock) glazing clips, rubber packing, anodised aluminium snap beading screw, Steelness steel hinges 150mm long (3 Nos each shutter) etc and one door stopper two legged with each leaf (shutter) complete (Glass and prelaminated board to be measured and paid separately under appropriate item of sch A) complete all as specified and directed by Engr-in-Charge. Make JINDAL/ HINDAL/ INDALCO

M&L, for 12 mm thick pre-laminated particle board, exterior grade, pre-laminated on both side with decorative choice laminations fixed between aluminium section with snap fitting aluminium clips and rubber gasket, as in cup board shutters complete all as specified and as directed by Engr-in-Charge.

S&F single side writing informatory mild steel reflective sign board/ plate size 30x30 CM rectangular having 1.5 mm thickness having retro reflective tape base and font. Colour and matter of sign board will be furnished by Engr-in-Charge. The board should be hanging on wall with fastener and heavy duty screw including taking down of existing all as specified and directed by Engr-in-Charge.

S&F in repair 15mm push pillar cock (auto closing system) of Jaguar (Code PRS-031) or equivalent brand and manufacutre all as specified and directed by Engr-in-Charge.

S&F in repair Urinal 15mm Push Cock (auto Closing system of Jaguar (Code PRS-077) or equivalent brand and manufacrure all as specified and directed by Engr-in-Charge.

S&F in repair 15mm bib cock (auto closing system) jaguar (Code PRS-043) or equivalent brand and

S&F in repair 15mm CP Brass spreader for urinal of apporved brand all as specified and directed by Engr-in-Charge.

S&F in repair Sensor tap super control box set battery operated / electrice operated Make Cera of cat Part No. F6010103 Cera or equvalent out of makes specified in list of makes.

S&F in repair chromium plated brass pillar taps 15mm bore long body cast copper alloy fancy type, Make- Hindware Cat part No- F-130001, or equivalent of Jaquar/Marc/Hindware.

S&F CPVC water tubing 15mm bore pipe, SDR 11 including provision of all fittings and connected completed in concealed and surface, along with primer & slovent cement for joint as per ASTM D 2564, pipe material shall be as per ASTM D 1785, fitting/ flanges shall be as per ASTM D2467, incl taking down old pipe line in concealed and surface all as specified and directed by Engr-in-charge. Note : Pipe and fittings made from CPVC shall be clearly marked with manufactures name and trade mark. manufacturer test certificate (MTC) shall be provided.

S&F CPVC water tubing 20 mm bore pipe, SDR 11 including provision of all fittings and connected completed in concealed and surface, along with primer & slovent cement for joint as per ASTM D 2564, pipe material shall be as per ASTM D 1785, fitting/ flanges shall be as per ASTM D2467, incl taking down old pipe line in concealed and surface all as specified and directed by Engr-in-charge. Note : Pipe and fittings made from CPVC shall be clearly marked with manufactures name and trade mark. manufacturer test certificate (MTC) shall be provided.

Note The amount of Rs 1,18,630/- against Schedule of Credit on Page No 142 to 143 shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance

PAWAN KUMAR

M/S ujjwal associates