Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.5 LAccepted-Finance | ₹8.5 L | L1 | Accepted-Finance Selected in Lottery |
| 2 | L1₹8.5 LRejected-Finance | ₹8.5 L | L1 | Rejected-Finance Not Selected in Lottery |
| 3 | L1₹8.5 LRejected-Finance | ₹8.5 L | L1 | Rejected-Finance Not Selected in Lottery |
| 4 | L1₹8.5 LRejected-Finance 233 ANAND NAGAR RATAPUR KANPUR UTTAR PRADESH | KANPUR | KANPUR | UTTAR PRADESH | ₹8.5 L | L1 | Rejected-Finance Not Selected in Lottery |
| 5 | L1₹8.5 LRejected-Finance | ₹8.5 L | L1 | Rejected-Finance Not Selected in Lottery |
Tender Value
₹9.9 L
EMD Value
₹99,500
Closing Date
30 Mar 2026, 3:00 pmClosed
Chief Engineer, KNN
Chief Engineer, KNN
Work of thermoplast penting and rambal strip at Sharda nagar for the work of zero fetility district under kanpur nagar
2026_NNKAN_1130651_1
48/AA(T)/25-26
Open Tender
Civil Works
Fixed-rate
45 days
sharda nagar
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,180
₹99,500
26 Apr 2026
26 Mar 2026
30 Mar 2026
26 Mar 2026
30 Mar 2026
26 Mar 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and laying hot applied thermoplastic compound 2.5 mm thick reflectorising glass beads@ 250gms pe sqm area. Thicness of 2.5mm is exclusive of surface opplied glass beads as per IRC 35 the finised suurface to the level, uniform and free from atreaks and holes (Thermoplastic repeated bar marking) | 465 | Sqm | - | - |
| 2 | Soler cats eye Solar road studs of powerful mode with bright LED light. Aluminium die cast body of matt finish having high intensity 3x2 Nos. flashing light throughout the light. Amber or Red Colour, all weather resistant with superior solar cell and side reflectors. | 80 | Nos | - | - |
| 3 | Retro -reflectorised traffic sign as per IRC-67-2012 providing &fixing of retro reflectonsed cautionary mandatory & informatory sign as per IRC;67-2012 made of high intersity grade sheeting type 1.5mm thick supported on a mild steel. 1-60cm tringle with diffinitation plate (20cmx60cm) p | 8 | Nos | - | - |
| 4Cat Eye (3M) Providing and fixing of raised pavement markers having moulded body of polycarbonate ASA HIPS or ABS able to support a load of 13.635 M.T.tested in accordance with ASTMD 4280 type H and other requirement mentioned in MORT&H Circular,its reflective lens made of micro prismatic lens (capable of providing total. | |||||
| 5providing & applying tack coat with bitumen cmulsion using cmulsion pressure distributor at the rate of 0.20kg per sqm on the prepared bituminous surface clcaned with mechanical broom . | |||||
| 6providing & laying debse graded bituminous macadam (DGBM)with higher capacity batch type HMP using crushed aggregetes of specified grading premu=ixed with bituminous binder @4.5 per cent by weight of total mix and filler transporting the hot mix to work site laying eith a hydrostatic paver and alignment ,rolling with smooth wheeled. vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause no 505 complete in all respects | |||||
| 7providing & laying bitminos concrete with higher capacity batch type hot mix plant using crushed aggregates of specified prading premixed with bituminous binder @5.4 per cent of mix amd filler transporting the hot mix to work site laying with a hydrostatic paver finisher with sensor control to the required grade,level and alignment rolling with smooth wheeled vibratory and tandem rollers to achieve the desired | |||||
| 8 | ROAD MARKING with hot applied thermoplastic compound with reflectorising glass besds on bituminous surface. Providing and laying hot applied thermoplastic compound 2.5 mm thick reflectorising glass beads@ 250gms pe sqm area. Thicness of 2.5mm is exclusive of surface opplied glass beads as per IRC 35 the finised suurface to the level, uniform and free from atreaks and holes (Thermoplastic repeated bar marking) | 82.5 | Sqm | - | - |
| 9 | ROAD MARKING with hot applied thermoplastic compound with reflectorising glass besds on bituminous surface (Repeated /tranvers bar). Providing and laying hot applied thermoplastic compound 5 mm thick reflectorising glass beads@ 500gms pe sqm area. Thicness of 5 mm is exclusive of surface opplied glass beads as per IRC 35 the finised suurface to the level, uniform and free from atreaks and holes (Thermoplastic repeated bar marking) | 55.2 | Sqm | - | - |
| 10Add 18 % G.S.T. | |||||
stage.html
html • 0.05 MB
tech_eval.pdf
fin_eval.pdf
finance_2109341.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 5.59 MB
BOQ_2109341.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .