WORK

Amount

Erection of various structures & equipments

Erection of main and auxiliary structure consisting of columns, beams, peaks, masts etc. and auxiliary structures required for installation of Bays ATM, AXM, YMM, XPM, BBL, BTI, BCT, ALP etc. including shifting of all material i.e. structure parts nuts, bolts washer etc. from store to site of erection, erection of structure as per drawings and practices using flat and spring washer with each bolt. Matching of holes, cutting, matching of member if required shall also be done by the contractor without any extra cost to complete the work satisfactorily. All material to be erected shall be supplied by the UPPTCL free of cost but all men, material and T&P required for satisfactorily completion of work shall be arranged by the contractor at his own cost.

Erection of Equipments :- Erection of following equipments as per instruction manual of various equipment and technical specification including shifting of material/equipment from store to erection site including all other associated work to complete the job satisfactorily :-

145 KV C.T. with JB

145 KV P.T. with JB

120 KV LAs.

145 KV Bus Isolator.

145 KV Line Isolator.

145 KV Tendom Isolator.

145 KV Post Isolator.

132 KV Control &Relay Panel

Control cable laying & interconnection

Laying of following sizes of control cable in the cable trench from control relay panel to various equipment/marshalling boxes/JB etc. in switchyard as per cable schedule, its saddling at every 75mm. distance with MS saddles of size 25x3mm. including carriage of cable drum from store to laying site & shifting back to store and all other associated works to complete the job satisfactorily as per technical specification.

Interconnection & termination of the above laid control cables between Control and Relay Panels & erected equipments i.e. СВ , СТ , СТ Junction Box, PT, PT Junction, box,ISO Box. Including making necessary holes in Gland Plates or Boxes whereever required along with supply of Cable glands of appropriate size and providing of Ferrules for each core of the cables & its termination with crimping type Copper Lugs alongwith preparation of interconnection Drawing and Commissioning of the Panel/ Feeders in co-ordination with T&C Wing including providing 02 sets of Hard Copies of as executed Interconnection Drawing including associated works required for the satisfactorily completion of the Job as per technical specification.

Bus bar and jumpering

Stringing of 132 KV New Mallawan bay-I and Mallawan Bay-II from dead end tower to main bus of ACSR panther conductor including fitting of tension clamp, hoisting of Disc Insulator, cutting of conductor and also shifting of all materials from store site.

Stringing of 132 KV Main bus bar 3 phase with ACSR Moose conductor including fitting of tension clamp, hoisting of Disc Insulator, cutting of conductor and also shifting of all materials from store site. (1 section =24Mtr)

Stringing of 132 KV Transfer bus bar 3 phase with ACSR moose conductor including fitting of tension clamp, hoisting of Disc Insulator, cutting of conductor and also shifting of all materials from store site. (1 section =24Mtr)

Stringing of 132 KV Jack Bus (3 phase ) for New Mallawan bay-I &II of ACSR Moose conductor including fitting of tension clamp, hoisting of Disc Insulator, cutting of conductor and also shifting of all materials from store site.

Stringing of 132 KV Jack Bus (3 phase ) for New Mallawan bay-I &II of ACSR panther conductor including fitting of tension clamp, hoisting of Disc Insulator, cutting of conductor and also shifting of all materials from store site.

Jumpering of newly erected equipments with ACSR Moose/panther conductors work includes jumper cutting,making& tightening of jumpers with specified tools.

Earthing details

Laying of Earth Mat in Extended 132 KV Switchyard of 132KV S/S Bangarmau,Unnao along with connecting the newly Laid Earth Mat with Existing Earth Mat columns including cost of all labour, T&P, Misc. Consumable material etc. for proper completion of work.

Laying of 40 mm din MS round bar, 700 mm below the ground level along with shifting of MS round bar from store to work site including cutting straightening welding painting excavation of trench etc. along with back filling of excavated trench after laying earth mat

Fabrication of 3 Meter long Electrode with 40 mm dia MS Round Bar having 150 mm long contont shape and then its pleroing vertieally, mside the Ground with top 700 mm below ground level including shifting of MS Round Bar from store to Switchyard.

Making of 150 mm long Lap Joint of above laid 40 mm dia Round bar by due cutting, Straightening welding on both sides.

Making of 150 mm long Lap Joint of above laid 40 mm dia Round bar to connect with existing Earth Mat of the sub station by due welding on bothe sides.

Making of cross Joint of abvoe laid 36 mm dia MS Round Bar, 700 MM below Ground Level by due welding at all 4 corners including providing & welding of suitable size MS Angle Piepe on opposited corners.

Making of End Joint of above laid 36 mm dia MS Round with Top of Vertically Pierced MS Electrodes, 700 mm below Ground Level by due welding.

2 point earthing of structure and equipments with 75x10 and 50x6 mm MS flats by digging 0.7 meter deep trench in earth from equipments to substation earthmat which includes providing,cutting,welding and bending of MS flats as well as shifting of materials from store to site.All materials including MS flat to be provided by contractor.

MS Flat 50x6 mm

MS Flat 75x10mm

MS Flat 25x6mm

Painting of earthing strip of various size with 1 coat of red oxide and 2 coat of Bus green ISI paint including vertical suppport. Paint to be provided by contractor.

MS Flat 50x6 mm

MS Flat 75x10mm

MS Flat 25x6mm

Making mesh earthing(AS per drawing) for 120KV LA and conecting with existing earthmate for 132KV Mallawan I&II

Miscellaneous work

Installation ,Laying,test & commissioning off links etc. of 48 fibre (DWSM) OPGW fibre optic cable alongwith all neccesary hardware

Supply & fixing of 150 watt LED Street light lattice Structure or 132KV GI Pipe bracket complete LED light with high power LED and unique lux value up to ensure uniform light distribution, luminaries single piece aluminum body suitable for 150 watt LED on GI pipe bracket complete in all respect including cost of lamp internal control gear Cat-"A" Philips / Bajaj / Crompton make with 02 year warrenty . This work including cable connection and all other associated work to complete the job as per technical specification including cost of man, material and T&P etc.

Installation, testing, and commissioning of a 63 kVA DG Set at 132kV S/S Bangarmau,Unnao for uninterrupted system operation. The contractor shall provide all required manpower, materials (DG set, AMF panel, cables, earthing system, foundation items), and T&P (crane, tools, test kits, safety gear). Work includes placement, interconnection, earthing, and commissioning of the DG Set with full-load testing. DG Set must conform to CPCB-II norms. A 24-month warranty with free service shall be ensured.

Installation, testing, and commissioning of outdoor 415V AC Lighting Distribution Board (LDB) at Bangarmau for proper functioning , as per instructions of the Engineer-in-Charge. All required manpower, tools, testing equipment, and earthing of the LDB shall be in the contractor's scope.

Installation, testing, and commissioning of Bay Marshelling Kiosk at Bangarmau for proper functioning , as per instructions of the Engineer-in-Charge. All required manpower, tools, testing equipment, and earthing of the Marshelling Kiosk shall be in the contractor's scope.

Obtaining No objection certificate from office of Electrical safety Directorate, Lucknow for first time energization of 02 Nos. 132 KV Bays with extension of 132 KV Main Bus and Transfer Bus. (including payment of fee as per challan)

Dismantling of 132 KV CT from existing main bus and shifting of dismantled CT to store.

Dismantling of main and auxillary structure including their shifting from dismantling site to safe storage place at the substation

Meena Elect & Engg. Works (BID ID -5509653)

Gupta Elect and Engg Works (BID ID -5509800)