Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹57.1 LAccepted-AOC C O BACHH RAJ BUCHA WARD NO 1 NT ROAD PO PS KHARUPETIA DARRANG ASSAM PIN 784115 | KHARUPETIA | DARRANG | ASSAM | 784115 | ₹57.1 L | L1 | Accepted-AOC Work Order Issued |
| 2 | L2₹57.6 L+₹54,727.70 (0.96%)Rejected-AOC C O LT BASANTA TALUKDAR WARD NO 3 DIPTI NAGAR PO PS RANGIA KAMRUP ASSAM PIN 781354 | RANGIA | KAMRUP | ASSAM | 781354 | ₹57.6 L+₹54,727.70 (0.96%) | L2 | Rejected-AOC L2 |
| Sl No | Description | Qty | Unit | MANOJ TALUKDAR L2 | DEEPAK KUMAR BUCHA L1 |
|---|---|---|---|---|---|
| 1.00 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :
Of area beyond 3 sq. metres | 4 | Each | 414 ₹1,656 Lowest | 414 ₹1,656 Lowest |
| 2.00 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.
For thickness of tiles above 25 mm and up to 40 mm | 28.14 | Sqm | 95 ₹2,673.3 | 93 ₹2,617.02 Lowest |
| 3.00 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of:
G.S. Sheet | 427.74 | Sqm | 140 ₹59,883.6 | 136 ₹58,172.64 Lowest |
| 4.00 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | 13.28 | Sqm | 45 ₹597.6 Lowest | 45 ₹597.6 Lowest |
| 5.00 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:
Cement mortar 1:4 (1 cement : 4 coarse sand) | 5.02 | Cum | 7,500 ₹37,650 Lowest | 7,500 ₹37,650 Lowest |
| 6.00 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :
1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | 22.35 | Cum | 12,000 ₹2,68,200 Lowest | 12,000 ₹2,68,200 Lowest |
| 7.00 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) | 21.16 | Cum | 6,500 ₹1,37,540 Lowest | 6,500 ₹1,37,540 Lowest |
| 8.00 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. | 146.88 | Sqm | 750 ₹1,10,160 Lowest | 750 ₹1,10,160 Lowest |
| 9.00 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.
With cement mortar 1:4 (1cement: 4 coarse sand) | 4.26 | Sqm | 478 ₹2,036.28 Lowest | 478 ₹2,036.28 Lowest |
| 10.00 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free,straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | 95.32 | Kg | 433 ₹41,273.56 Lowest | 433 ₹41,273.56 Lowest |
Tender Value
₹54.7 L
EMD Value
₹1.1 L
Closing Date
10 Oct 2025, 2:00 pmClosed
SE, PWD, Tezpur Building Circle, Tezpur
O/O The Superintending Engineer, PWD, Tezpur Building Circle, Tezpur
Construction of boundary wall, repairing of the hospital and doctor and staff quarters at Batashipur NPHC (Lerelakachari NPHC)
2025_PWBNH_47650_1
SE/TB/TEN/02/2025-26/531 Dated 16.09.2025
Open Tender
Civil Works - Building
Item Rate
180 days
Dhekiajuli
Please refer Tender documents.
5 documents required · 5 mandatory
₹1,100
₹1.1 L
Yes
O/O The SE, PWD, Tezpur Building Circle, Tezpur
15 Nov 2025
22 Sept 2025
13 Oct 2025
22 Sept 2025
10 Oct 2025
24 Sept 2025
24 Sept 2025
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .