WELCOME MAINTENANCE INCL PETTY REPAIRS TO OFFRS MD ACCN UNDER AGE B/R-II OF GE (EAST) JALANDHAR CANTT

NOTE:- The work for periodical services shall include the following and the rates quoted by the bidders shall include the same:- (a) The work pertaining to periodical services shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials like exterior emulsion paint, putty etc after approved by the GE. (b) The contractor shall upload with the documents under cover ''Memoradum of Understanding" (MoU) with at least one of the manufacturers mentioned in the contract, faling which the bid shall be laible to be rejected. (c) Use of scaffolding, trestles, ladders, cradles etc neccessary for execution of work and protective measures. (d) Removing of nails, making good holes, cracks etc. (e) Work in patches and in narrow/widths, bands, cornics, pilasters etc and cutting in edge of line where necessary. (f) Spreading and removing covering to doors, windows, floors, fittings etc to protect them from splashes. (g) Washing floors, cleaning glass, joinery, electric fittings, wirings etc. drops and splashes of paint to be cleaned.

Taking down Cement Plaster of any description on Brick Walls, Concrete Surfaces including racking out joints, hacking for key, scrubbing down with Water remove Dust, debries/ rubbish etc., complete all as specified and as directed.

M&L Rendering (Internal) 15mm thick in Cement Mortar 1:6 on Brick Walls or on Concrete Surfaces, plastered surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed.

M & L for preparation of newly plastered surface of wall and apply two coats of oil bound distemper over a coat of 1mm average thick wall putty, all as specified & directed.

Material and labour for 15mm thick cement plaster on brick or concrete surfaces in cement mortar (1:4) mixed with integral water proofing compound in the proportion recommended by manufacturer, surfaces finished fair and even complete all as specified and as directed. (WPC shall be measured and paid separately under appropriate item of this BOQ).

Supply only integral water proofing compound all as specified and as directed.

M&L for prepartion of new plastered surface of wall and applying two coat of cement base paint, complete all as specified and as directed.

M&L 5 mm thick cement plaster in cement mortar 1:3 on ceiling surfaces finished even and smooth without using extra cement all as specified and as directed.

M & L for preparation of newly plastered surfaces of walls and apply three coat of white wash complete all as specified and as directed.

Material and labour for preparation of old surfaces of walls including cornices, plasters etc (Plastered or unplastered surfaces) and applying one coats of cement base paint complete all as specified and as directed.

M&L for washing, rubbing down, preparing and stopping of old surfaces, removing nails, making good holes,cracks etc and applying one coat of cement base paint, complete all as specified and as directed.

M&L for washing, rubbing down, preparing and stopping of old surfaces, removing nails, making good holes,cracks etc and applying Two coat of cement base paint, complete all as specified and as directed.

Material and labour for preparation of old decorated surfaces of walls, washing rubbing down and stopping of distempered and painted surfaces and applying one coat of oil bound distemper complete all as specified and as directed.

Material and labour for preparation of old decorated surfaces of walls, washing rubbing down and stooping of distempered and painted surfaces and applying two coat of oil bound distemper complete all as specified and as directed.

M&L for washing, rubbing down, preparing and stopping of old distempered surfaces, removing nails, making good holes,cracks etc and applying one coat of oil bound distemper on wall incl making good necessary doubing out where required with wall putty white cement base (J K & Birla) and making smooth finish, complete all as specified and as directed.

Ditto all as per srl item No. 14 above, but two coat oil bound distemper complete all as specified.

M&L for complete removal of existing treatment of old plastered surface of wall and applying two coat of oil bound distemper over a coat of 1mm average thick wall putty white cement base (J K & Birla) and making smooth finish, complete all as specified and as directed.

M&L for one coat of white wash old plastered surfaces of ceiling including preparation of surface complete all as specified

M&L for two coat of white wash on old plastered surfaces of ceiling including preparation of surface complete all as specified

M&L preparing New Wood and Wood Based Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (1st quality/ grade) over a Coat of Pink Primer, complete all as specified and as directed.

M&L preparing Old Painted Wood and Wood base Surfaces of any description, not otherwise described over 10 Cm Width or Girth and applying One Coat of Synthetic enamel Paint (1st quality/grade), complete all as specified and as directed.

M&L preparing Old Painted Wood and Wood base Surfaces of any description, not otherwise described over 10 Cm Width or Girth and applying Two Coats of Synthetic enamel Paint (1st quality/grade), complete all as specified and as directed.

M&L for prepration of new steel surfaces and applying two coats of synthetic enamel paint over a cot of primer, complete all as specified and as directed.

M&L for prepration of old painted surface of steel and applying one coats of synthetic enamel paint, complete all as specified and as directed.

M&L for prepration of old painted surface of steel and applying Two coats of synthetic enamel paint, complete all as specified and as directed.

Material and labour for 50mm PCC 1:3:6 type C1 using 20mm graded aggregate as in plinth protection and path finishing the surfaces even and smooth with using extra cement complete all as specified and as directed.

Material and labour for 25mm thick cement concrete (1:2:4) type B-1 (12.5 mm graded aggregate) to receive the top layer of tiles complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing) and disposal of rubbish outside MD land complete all as directed.

Material and labour for non-skid ceramic coloured tiles (premium quality) 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors set and jointed in neat cement slurry and pointed in while or coloured cement to match over and including 15mm thick bedding layer CM 1:6 in complete all as specified

Material and labour for coloured glazed tiles (premium quality) of size 450x 350x7 mm thick fixed with neat cement slurry in vertical surface to wall pointing in white/coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and as directed.

M&L Vitrified Ceramic tiles (premium quality) light shade, 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour tiles over and incl 15mm thick screed bed in CM 1:6 all as specified.

Ditto all as per srl item No. 30 here-in-before, but in skirting and 10mm thick rendering as backing coat of CM 1:4

M&L for 20 mm thick machine cut granite (of any type ) tiles stone jointed with neat cement slurry mixed with pigment to match the colour of stone incl cutting and polishing and making hole in stone and RCC shelves suitable for gas pipe, with round edges where required and incl 15mm screed bed with CM1:6 including dismentling of existing granite complete all as specified and as directed.

Taking down chowkhats or frame with shutter w/o taking off shutter from the frame area not exc 1.5 Sqm each all as specified.

Ditto all as per srl item No.33 above, but area exc 1.5 Sqm and not exc 4 Sqm each.

Taking down shutters of any description exc 1 Sqm and not exc 2 Sqm each complete all as specified and as directed.

Material and labour for framed work as in doors or gates of angle or other section with gusset plates, hold fast rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete all as specified and as directed.

S & F pressed steel frames 125x60mm as per IS for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including PCC 1:5:10, type B0 (20mm aggregate) filling in steel frame complete all as specified

All as above but 105x60mm size

S&F for for 35mm thickness of factory made flush shutter solid core construction with block board core & ply wood face panels, commercial type on both side including 35 x 6 thick 2nd class Hard wood lipping on edge, complete all as specified and as directed.

S&F for for glazed and skelton shutters factory made 35mm thick open rebated and prepared to receive glass, gauge etc (without sash bars) edging of framing plain, chamfered or rounded with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I, Section 8, Clause 8.24(a) complete all as specified and as directed.

Supplying and fixing steel windows/ventilators 1.25 mm thick Box type (primer coated) ERW hollow 'P' section of size 60 mm x 25 mm single rebated comprises of glazed sutter EWR sec 50 mm x 20 mm and 1 mm thick and two openable leaf conisting two Nos sash bar of 'T' section 20 mm x 3 mm complete welded to frame with one vertical mullion of EWR bot 'T' section of size 60 mm x 25 mm and 1.25 mm thick including cuttings holes and making good dismantled portion in PCC (1:2:4) type B1, four Nos for each window including following fittings welded to failed shutter:- (a) Holdfasts 150 mm long 12mm x 3 mm made to shape- 4 Nos per window (b) Handle of Z sec 20 mm x 25 mm, 100 mm long - 1 nos per leaf. (c) MS tower bolt 150 mm long - 2 Nos per leaf. (d) 'Z' sec 20 mm x 25 mm , 100 long stopper-01 Nos per leaf, (e) Cleat 55mm long of hollow square 15 mm x 20 mm x 63 mm welded to hinges - 1 Nos per leaf (f) MS pintal hinges of size 75 mm x 12 mm - 2 Nos per leaf. (g) fabriction and fixing arrangement complete. Note:- Grill / guard war , glass pane, wire and painting shall be measured and Paid saperately.

Ditto all as per serial item No. 41 above, but in gauged shutters without sash bars all as specified and as directed.

Ditto as per description of item no 41 above, but in ventilators

S & F mild steel framed work for such as guard bars/grills,grating atc with end of bars shouldered and/ or riveted forged into spikes, framed guard bars barred iron door ,railings and similar work complete conforming to Fe-290 Gde E 165 including one shop coat of zinc chromate primer complete all as specified and as directed.

S&F for for sheet glass ordinary quality 3.0 mm thick in square not exc 0.50 Sqm each pane glazing with oil putty, clip in metal frame and wooden beading in wooden frame complete all as specified

M&L for 3 mm thick plain glass fixing and glazing with oil putty/nails wire including haking out old broken glass in wooden/steel frame complete all as specified and as directed.

S&F for for galvanized mild steel wire cloth 0.56 mm nominal dia and average width of aperture 1.18 mm and fixed with tinned tacks complete all as specified and as directed.

S&F for for in repair galvanized mild steel wire cloth 0.56 mm nominal dia and average width of aperture 1.18 mm and fixed with tinned tacks complete all as specified and as directed.

M&L for powder coated aluminium door shutter having 150mm x 44mm x 2.85mm thick bottom rail, 150 mm x 44mm x 3mm thick middle rail, 100mm x44mm x2.85 mm thick stile and top rail including necessary fitting joinery cleat, glazing packing snap beading 10 mm x 10 mm , Powder coated aluminium handle 200 mm long (02 Nos) , 3 Nos 100 mm size chromium plasted butt hinges, 2 Nos 200mm size Alu tower bolt and Aluminium body hydraulically door closer , designation No-3, universal type, weight between 61 to 80 kg etc inlcuding frame of section 100 mm x 44 mm x2.85 mm and door shutter, bottom portion covered with 9mm thick prelaminated particle board, interior grade, prelaminated on both sides with decorative choice lamination (colour/design approved by Engr-in-Charge) fixed to Aluminium frame work and top portion covered with 5.00 mm thick tinted glass and pattern, one mortion lock (Make: Harrison ) with shutter and fixing including taking down of existing Chowkat with Shutter complete all as specifies and as directed. by Engineer-in-Charge Make of aluminium section Hindalco/Jindal

M&L for powder coated aluminium window shutters (Glass shutter and wire gauge shutter) side hung having 75 mm x 44 mm x 2.85 mm thick stiles bottom rail and top rail including necessary ftting joinery cleat glasing packing snap beading 10 mm x 10 mm , 4 x nos of anodised aluminium handle 150 mm size, 8 x nos of chromium plated butt hinges 75 mm size and 4 x nos of 100 mm long Alu tower bolt etc inlcuding frame of section 100 mm x 44 mm x 2.85 mm and including 5.00 mm thick tinted glass and including aluminium grill and fixing including taking down of existing Chowkhat with Shutter complete all as specified & directed by Engineer-in-Charge. Make of aluminium section Hindalco/Jindal

M&L for 5.50 mm thick glass sheet, ordinary quality and glazing with oil putty in square complete all as specified.

S & F factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Plain Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with density not less than 650 kg/cbm Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen/Balcony Doors & Cabinets.

Ditto all as per item No 52 above, but One side laminated board complete all as specified and as directed.

Resecuring or earsing and adusting without taking down of shutters of any description exc 1 sqm and n-exc 2 sqm each complete all as specified and as directed.

S & F in repair 12 mm plywood, grade BWR type BB fixed with screw to timber frame work for shutter,shelves etc including removing old work from site any thickness complete all as specified

Petty repair to wooden/PVC Cup Board shutters by making minor adjustment to hinges etc easing shutter incl taking down of shutter if required and refixing in same position including welding to angle iron chowkhats

S & F in repair steel window handle MS painted with black japan left or right side complete fixed as directed by Engineer-in-Charge

S & F in repair steel peg stay 250mm long black japan fixed with screw or weleded if required.

Welding in repairs not exceeding 2.5 cm in length & thickness of metal to be welded not exceeding 6 mm complete all as specified including material & labour.

S&F for 2nd class hard wood plain fillets square or rectangular or tri angular in section and bull- nosed, splayed, chamfered or rounded on one edge or face, clean sawn planed on both sides secured with nails or beads in section exc 3 sq cm but not exc 6 sq cm including painting all as specifier and as directed.

Petty repair to existing built in steel cup board, locks, hinges including necessary welding and making the lock/ steel cup boards complete serviceable all as per existing pattern as directed including provision of new keys.

M&L in repair for mild steel pipe 25 mm dia curtain rod with PVC coating fixed in the MS hooks, and finials/side brackets (both side), shade as approved by GE all as specified.

S & F in repair 20mm dia curtain rails , mild steel , chromium plated fixing in cup board with brackets, stops, rollers etc, all as specified

S & F 100 mm Hasp & Staple extruded aluminium alloy , fabricated type, anodised including bolt to hinge plate and fixed with screws with Cup Board shutter, all as specified and as directed.

Petty repair to Steel rolling shutters system of any size and any description including reparing of ball bearing, top cover, anchoring rod, hasp and staple,gear operated system,crank handle, chain wheel and hand chain including necessary welding, grreesing etc and making the shutters complete serviceable all as per existing pattern as specified

M&L Racking out joints/pointing hacking for Key, scrubbing down with water and Flush pointing in cement mortar 1:3 on brick tiles laid flat complete all as specified and as directed.

M&L for repairing of RCC projections, chajjas , roofs, facia etc. in patches not exceeding 3 Sqm in each patch by necessary preparation i.e. scrapping, cutting, chiseling, derusting and cleaning exposed reinforcement, sufaces of damaged, loose RCC surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1:1.5:3) using 12.5mm graded crushed stone aggregate and reinforced with welded mesh of weight exc 2kg per sqmtr but n.exc 3kg/sqm with or without facia and finished with cement sand mortar (1:3) using coarse sand in patches are n.exc 70mm including applying two coats of finishes to match with the existing surfaces in at any height complete all as specified. Note:- Cost of formwork and welded mesh shall be deemed to be included in unit rate quoted by the contractor.

S&F for for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. Tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at the site as per specification & drawing

S&F for for PVC solid door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing

S&F for for 250mm long CP mild steel sliding door bolts stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified.

S&F for for in repair 250mm long CP mild steel sliding door bolts stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed.

S&F for for 100mm size mild steel butt hinges, medium weight, cold rolled all as specified and as directed.

S&F for for 100mm size stainless steel butt hinges for fixing to PVC doors all as specified.

S&F for for 200mm long mild steel tower bolt stove enamelled black with bright bolt all as specified.

S&F for for 150 mm mild steel pressed handles oval type, stove enamelled black all as specified.

S&F for for aluminium alloy door pull/bow Handles 150 mm size fixed with machine screws.

S&F for for in repair Bib tap chromium plated, cast copper alloy suitable for 15mm bore iron pipe with long body fancy type complete all as specified and as directed.

S&F for in repair fancy CP 2 way Bib Cock with Flange of Make Jaquar Cat No OPP-15041PM or equivalent in Kohler or Cera as approved by GE suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed.

S&F for in repair fancy CP center hole basin mixer (Swan Neck) of Make Jaquar Cat No FLR-5167NB or equivalent in Kohler or Cera as approved by GE suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed.

S&F for in repair fancy CP pillar cock with lift type operating, chromium plated of make Jaquar CAT No FLR-5015 or equivalent in Kohler or Cera as approved by GE suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed.

S&F for in repair fancy CP Concealed Stop Cock with Adjustable Wall Flange make Jaquar CAT No OPP-15083KPM or equivalent in Kohler or Cera suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed.

S&F for in repair fancy CP angular stop Cock with Wall Flange of make Jaquar CAT No OPP-15053PM or equivalent in Kohler or Cera as approved by GE suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed.

S&F for in repair fancy CP 2 way angular stop Cock with Wall Flange Make Jaquar Cat No 6811 or equivalent in Kohler or Cera as approved by GE suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed.

S&F for in repair fancy Wall Mixer 3-in-1 with provision for both Over Head Shower and Hand Shower complete with 115mm long bend Pipe, connecting legs & wall flange of makes of Make Jaquar Cat No FLR-5281N or Kohler or Cera suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed.

S&F for in repair fancy CP Sink cock swinging spout (Wall mounted) with connecting legs & wall flanges of Make Jaquar Cat No FLR-5347N or Kohler or Cera as approved by GE suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed

S&F for in repair fancy Over Head Shower square wall shower (Adjustable) of size 100mm including all fittings of Make Jaquar Cat No OHS-1661 or equivalent in Kohler or Cera as approved by GE suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed

S&F for in repair fancy Hand Shower 100mm round shape(ABS Body chrome plated with Gray face plate) with 1.50 Mtr flexible tube and hook of Make Jaquar Cat No HSH-1937 or equivalent in Kohler or Cera as approved by GE suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed.

S&F for in repair fancy towel rail/rod, D type, 600mm long of Make Jaquar Cat No CAN-1111SM or equivalent in Kohler or Cera as approved by GE fixing with Chromium plated Brass Screws and Wooden/Plastic Cleats, complete as all specified and as directed.

S&F for in repair fancy towel ring square type flange of Make Jaquar Cat No CAN-1121N or equivalent in Kohler or Cera as approved by GE fixing with Chromium plated Brass Screws and Wooden/Plastic Cleats, complete as all specified and as directed.

S & F in repair health faucet 1.00mtr long flexible tube & wall hook of Make Prayag Cat No BEA-41 or equivalent Jaquar/Kohler/Cera suitable for 15mm dia for iron pipe or for brass ferrule all as specified & directed.

S & F in repair Jet spray with holder for EWC 1.00 mtr long of Make Prayag Cat No BEA-17 or equivalent makes of Group I of Appx “B” suitable for 15mm dia for iron pipe or for brass ferrule all as specified and as directed.

S&F for in repair, toilet paper holder of MAKE: Jaquar CAT No. CAN-1153S or equivalent in Kohler or Cera and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and as directed.

S & F in repair PVC connection, heavy duty 15 mm bore, 45 cm long with 2 Nos PTMT nuts of approved quality complete all as specified and as directed.

S & F in repair new flexible PVC waste pipe of approved quality 32 mm bore, 75 cm long with one end socketed fixed to waste coupling including one PVC reducer 32mm complete all as specified and as directed.

S&F for in repair, Coloured PVC bath Cabinet of size 450x450x90mm with Looking Mirror (as approved) fixing with Chromium plated Brass Screws and Wooden/Plastic Cleats, complete as all specified and as directed. Make:-Jaquar, Cera/ Kohler.

S&F for in repair, Sheet Glass Shelf Assembly, consisting of 5.5mm thick Sheet Glass Shelf 12 Cm Wide with Chromium plated Bracket Guard and Railing 60 Cm long, complete all as specified and as directed.

S&F for in repair, Sheet Glass Corner Shelves Assembly (Transparent), consisting of 5.5mm thick Sheet Glass Shelf with Chromium plated Bracket Guard and Railing, Make Jaquar CAT No CAN-1173 or kohler or Cera as approved by GE complete all as specified and as directed.

S&F for in repair fancy chromium plated soap dish, complete all as specified and as directed. Make : Prayag or equilvant

S&F for Vitreous China White Wash Down Water Closet Pan (EWC) with Trap and Fixing Bolts (excluding Flushing Cistern and Flush Pipe) including connection to drain (or outgoing pipe) and to Flushing Pipe, Anti-syphonage Pipe, etc. and Making Good to Floor /distrubed surfaces including dismantling the existing unserviceable Water Closet complete all as specified and as directed. Make:-Jaquar, Cera/ Kohler.

S&F for coloured vitreous china wash down one piece water closet with seat cover , hinges, Accessories set, size 380x655x765mm floor mounted Jaquar CAT No-LYS-WHT-38751P180UFSMZ fitting with twin flush fitting with inlet ball valve float and handle, incl fixing bolt, with bottom and cover and mild steel chromimum plated hinging device with complete fixed in repairs all as specified and as directed. by Engr-in-Charge.

S&F for Vitreous China White Squatting Pan, ‘ORISSA’ Pattern of size 580x440 mm with Integral Foot Rests, ‘P’ or ‘S’ Trap, providing Joints between Flush Pipe and Socket of WC Pan incluiding provision of Lime Concrete Bedding and Making Good to Floor/distrubed surfaces and fixed-in-repairs, complete all as specified and as directed. Make:-Jaquar, Cera/ Kohler.

S&F for in repair, White Plastic Water Closet Seat Cover for Water Closet Pan (Pedestal Pattern), Closed Pattern with Flat bottom and Cover and Mild Steel Chromium plated or Aluminised Hinging Device, complete all as specified and as directed.

S&F for in repair PVC Flushing Cistern 10 Litre capacity White, Low Level, Valve less, syphonic action type with Inlet, Ball Valve, Float and handle, a pair of Cast Iron Brackets Erecting Stand duly painted including cutting and pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 including dismantling the existing unserviceable Cistern complete all as specified and as directed. Make:-Jaquar, Cera/ Kohler.

S&F for Vitreous China Wash Hand Basin of size 550x400mm (Flat Back or Angle Back type) with pedestal including 32mm bore (dia) Brass Chromium plated Waste Fitting, a pair of Cast Iron Bracket duly painted / Erecting Stand including cutting and pinning in Ends Making Good disturbed Surfaces in Cement Mortar 1:3 including dismantling the existing unserviceable Wash Basin complete all as specified and as directed. Make:-Jaquar, Cera/ Kohler.

S&F for in repair, Stainless Steel Sink with Drainage Board 1.0mm thick Over-all size 915x460mm and Bowl size 410x330x160mm for Kitchen or Laboratory with Plugs, Washers, Waste Fitting 32mm bore (dia) of Brass Chromium Plated, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3, complete all as specified and as directed. Make:-Jaquar, Cera/ Kohler.

S&F for in repair sink made of stainless steel 1mm thick, kitchen or laboratory, with plugs, washers and wastes coupling, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm (minimum), complete all as specified and as directed. Make:-Jaquar, Cera/ Kohler.

S&F for in repair, Stainless Steel Kitchen Rack of size 750x800x200mm (Thickness of Sheet not less than 0.63mm) with Mild Steel Brackets and fixed to Wooden Plugs with Chromium Plated Brass Screws and Cup Washers, complete all as specified and as directed.

S&F for chromium plated grating 125 mm dia circular of approved make and fixing with cement mortar 1:3 on Nahani trap or floor trap complete all as specified and as directed.

S&F for in repairs 32mm dia PVC waste coupling for WHB or Sink (half or full threaded) complete all as specified and as directed.

M&L for chromium plated peg set of 5 (PTMT), fixed with screws and plugging to rear side of door shutter in bath, complete all as specified and as directed.

M&L dis-connecting existing PVC tank of any capacity, setting aside (or lowering, if required) for repairs, cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes etc and finally washing the internal surfaces with bleaching powder/soap solution etc, re-connecting and re-fixing in position including making connections and writing Cleaned on ____ (Date) and 'Next Date of Cleaning ____ (Date), 4" height on outer face of tank with white paint complete all as specified and as directed.

Demolition of RCC water tank of any description and remove the debries from the roof and dispoed it out of defance land, complete all as specified and as directed.

S & F rotational moulded synthetic (HDPE), UV Coating, white triple layer, antimicrobial water storage tank 500 litre capacity (cylinderical vertical with closed top,) hoisted & fixed in position all as specified in SSR Part-I, including dismantling of existing water tank, complete all as spfd & directed. Make:- Sintex (Pure)/ Rotex.

S & F rotational moulded synthetic (HDPE), UV Coating, water storage tank 1000 litre capacity (cylinderical vertical with closed top,) hoisted & fixed in position all as specified in SSR Part-I, including dismantling of existing water tank, complete all as spfd & directed. Make:- Sintex (Pure)/ Rotex.

S&F for 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 mm - 210 gms./ 25mm-455gms/ 40mm - 690 gms) complete all as specified.

S&F for in repair 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 mm - 210 gms./ 25mm-455gms/ 40mm - 690 gms) complete all as specified.

S&F for in repair 15mm Gun-metal, globe or gate valves, (ISI marked) with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed.

S&F for in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed.

S&F for mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate welded to steel frame/ screwed to wooden frame complete all as specified and as directed.

M&L Galvanised iron water tubing 15 mm bore, medium grade with & including all fittings fixed to wall, ceilings and or laid in floors etc including taking down the existing tubing complete all as specified

Ditto all as per srl item No. 121 above, but for 20mm bore tube complete.

Petty repair to GI socket/GI Nipple(100/150mm Long)/GI Tank Nipple with check nuts and washers/GI Union/GI Elbow/GI Tee for 15mm bore replaced independly as approved by Engineer-in-Charge

Petty repair to GI socket/GI Nipple(100/150mm Long)/GI Tank Nipple with check nuts and washers/GI Union/GI Elbow/GI Tee for 20mm bore replaced independly as approved by Engineer-in-Charge

S&F for for PVC cover of water tank matching with existing water tank complete all as specified

Petty repair to leaking flushing cistern low/high level, incl adjustment in the internal fitting repair to PVC bends pipe, flush pipe etc all as per directed by Engineer-in-Charge

S&F for Rim latch 125 mm with two levers, of mild steel body stove enamelled finish; with brass knob or lever handle and fixed all as specified directed by Engr-in-Charge.

Petty Repair for stop leaking of PTMT Bib tap/ Pillar tap/Stop cock by suitable jumper washer and etc, complete all as specified

Dismantling of brick work or stone/boulders masonary, built in cement mortar or cement lime mortar including all quions, arches, pillars etc. and rubbish materials remove from site all as specified and as directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified and as directed.

Ditto all as per Item No 130 above, but except bricks

S&F for in repair new PVC Syphon For Flush Tank (White) Cistern Part Flush Tank Lever as specified and as directed. by Engr -in-charge.

S&F for in repair 100mm size mild steel butt hinges medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and as directed.

S&F for in repairs mild steel barrel tower bolt 200mm long stove enameled black with bright bolt and fixed complete all as specified and as directed.

S&F for in repair mild steel pressed handles, oval type, stove enameled black 150mm size complete all as specified and as directed.

S&F for in repair Door closer hydraulically regulated, Mild Steel universal type, suitable for doorshutters up to 700 mm in width and of weight not more than 35 kg and fixed complete all as specified and as directed.

S&F for 150mm long aluminium, anodized, barrel tower bolts of extruded section complete all as specified and as directed.

S&F for in repair of 150mm long aluminium, anodized, barrel tower bolts of extruded section complete all as specified and as directed.

S&F for for floor door stopper 140mm of aluminium alloy body and tongue anodized with hard drawn steel all as specified and as directed. by Engineer-in-Charge

S&F for for in repair floor door stopper 140mm of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor all as specified and as directed. by Engineer-in-Charge

S&F for 100mm size hasp and staple, extruded aluminium alloy, fabricated type anodised including bolt to hinge plate and fixed with screws complete all as specified and as directed.

S&F for in repairs 100mm size hasp and staple, extruded aluminium alloy, fabricated type anodised including bolt to hinge plate and fixed with screws complete all as specified and as directed.

S&F for extruded aluminium alloy handles, fabricated type, anodised, 100mm size, all as specified and as directed.

S&F for in repair extruded aluminium alloy handles, fabricated type, anodised, 100mm size, all as specified and as directed.

Petty repair to PVC door shutters by making minor adjustment to hinges etc easing shutter incl taking down of shutter if required and refixing in same position including welding to angle iron chowkhats

Tightening the loose wooden pelmet boxes made out of plywood/ block board with two new 2nd class hard wood plugs (gutties) of size 30 mmx 40 mm long embedded in cement mortar 1:3 and two new side MS clips and fixed with MS screws complete, the length of pelmet not exc 1.5 m complete all as specified.

Petty repairs to cup board/cabinet (kitchen) including easining of cupboard shutters including taking down and refixing in position of shutters drawers tightening of piano type hinges fixing of handles etc with drawers adjustment of ball catches etc (one unit shall comprises one cup board irrespectives in numbers of shutters and drawers) complete all as specified.

S&F for in repairs 40 mm dia powder coated cup board knobs fixed with nut, screws and washer of mild steel bright finish complete all as specified.

S&F for Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and as directed

S&F for in repair 18/19mm thick MDF board, exterior grade, prelaminated on both side with decorative choice lamination, fixed with screws to timber frame work, including 18/19mm wide, 6mm thick 2nd class HW lipping on edges complete all as specified and as directed.

S&F for Mild steel rollers and plate suitable for sliding drawers, complete all as specified and as directed.

S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised., width of flaps when open in 30mm complete all as specified and as directed.

S & F brass body ball catches with 8mm dia steel ball and striking plate including letting in complete all as specified and as directed.

S & F 75mm brass handles, cast type, polished bright, fixed with brass screw, complete all as specified and as directed.

S&F for 40mm wide 3 to 6 mm thick tappered rubber beading fixed to door shutter with nails as in repair all as specified.

M&L for grubbing up bushes or trees trunk of girth n. exc. 10cm including cutting of tree/bushes grown in/over walls, digging out roots and making good the disturbed portion of wall with PCC (1:3:6) type C-1 using 20mm graded stone aggregate including matching the same complete all as specified & directed.

Cleaning of roof removing bushes, mud, debries, digging out Existing Surface roots and making good the disturbed portion of roof tiles with tiles including matching the same complete all as specified & directed.

Taking down eaves gutters and rainwater pipes/sewage pipe (any size or pattern ),including all fittings,heads,shoes,bends,swan necks etc.including cleaning or refixing or removal to store.

S&F for 110 mm bore PVC pipes single socketed in any length with rubber ring joints fixed to walls or laid in floor, complete all as specified and as directed.

S&F for 75 mm bore PVC pipes single socketed in any length with rubber ring joints fixed to walls or laid in floor, complete all as specified and as directed.

S&F for 110 mm dia PVC (SWR ) bends any radius complete all as specified and as directed.

S&F for 75 mm dia PVC (SWR ) bends any radius complete all as specified and as directed.

S&F for 110 mm dia PVC (SWR ) branches piece,double (double Y) equal or unequal with rubber rings ljoits fixed to walls complete all as specified and as directed.

S&F for 75 mm dia PVC (SWR ) branches piece,double (double Y) equal or unequal with rubber rings ljoits fixed to walls complete all as specified and as directed.

S&F for 75mm dia PVC (SWR ) vent cowl complete all as specified and as directed.

M&L 75mm PVC (SWR) PVC (SWR) floor trap, plain with grating including jointing with solvent cement fixed in repairs complete all as specified and as directed.

Taking down carefully existing point wiring of any type/ any size (ie on wooden/ batten, surface conduit wiring, casing capping wiring or concealed conduit wiring) complete for light, fan, socket or power point etc including removing switches, sockets, holders, ceiling rose, pendants, regulators, light fittings, surface conduit only switch board outlets with sheets and other materials for taking credit of unserviceable light as per Sch of credit and keeping serviceable lights in safe custody for re-fixing under relevent items and making good disturbed surface of walls,roof, floors etc. with any type of civil wk involved complete all as specified and as directed.

M&L for point wiring for light point with 1.5 Sqmm (nominal area) FRLS PVC insulated unsheathed multi stranded copper conductor of size 1.5 Sqmm cable drawn in and including concealed rigid PVC conduit medium grade not less than 20mm dia with accessories including cutting chases for laying of conduit /fixing of boxes in walls/floor etc including making good to disturbed surfaces as per adjoining specification and terminated in and incl sunken pressed steel boxes duly painted with anti corrosive paint over a coat of red oxide primer with plastic laminated bakelite sheet top cover 3mm thick make hylum or equivalent fixed with nickel polished screws with cup washers etc including FRLS PVC insulated unsheathed multi stranded copper conductor 1.5 Sqmm single core as earth continuity conductor (green colour) connected with earth dolly with thimble complete all as specified and as directed by Engr-in-Charge.

Ditto all as per srl item No. 168 above, but for one fan point controlled by one switch complete all as specified

Ditto all as per srl item No. 168 above, but for one bell point controlled by one bell push complete all as specified.

Ditto all as per srl item No. 168 above, but for one light point controlled by 2 No, two way switches complete all as specified.

Ditto all as per srl item No. 168 above, but for one socket outlet 5 Amps on independent board complete all as specified.

Ditto all as per srl item No. 168 above, but for one socket outlet 5 Amps on the same board complete all as specified.

Ditto all as per srl item No. 168 above, but with 2.5 Sqmm (nominal area) FRLS copper cable for one 3 Pin 15 Amp socket on independent board including one 2.5 Sqmm copper conductor multi stranded green colour PVC insulated unsheathed FRLS cable 1100 volts grade as earth wire connected to common earth and earth dolly with all accessories complete all as specified and as directed. by Engineer-in-Charge.

S&F for in replacement switch piano flush type, 5 Amps, 240 Volt AC single pole, one way complete all as specified.

S&F for in replacement switch piano flush type, 5 Amps, 240 Volt AC single pole, two way complete all as specified.

S&F for in replacement switch piano flush type, 15 Amps, 240 Volt AC single pole, one way complete all as specified.

S&F for in replacement socket out let 6 Amp, 3 pin flush type complete all as specified.

M&L in replacement Socket outlet multi purpose 2 in 1, 5/6 pin, 6 & 15 Amps, flush type complete all as specified.

M&L in replacement Bell push switch flush type 5 Amps, SP, 240 volts complete all as specified.

M&L in replacement Bell electric AC (Ding Dong) 240 volt SP complete all as specified.

S & F in repair for batten holder insulated body with matching colour back plate all as specified and as directed.

S&F for in repair for ceiling rose surface type bakelite 65 x 50mm three terminal complete all as specified.

S&F for in replacement five step fan regulator (socket type), electronic type, single phase, including connection complete all as specified.

Material and labour for point wiring with modular accessories for light point with 1.5 Sqmm (nominal area) FRLS PVC insulated unsheathed multi stranded copper conductor of size 1.5 Sqmm cable drawn in and including concealed rigid PVC conduit medium grade not less than 20mm dia with accessories including cutting chases for laying of conduit /fixing of boxes in walls/floor etc including making good to disturbed surfaces as per adjoining specification and terminated in and incl sunken pressed steel modular boxes(1.6 mm thick sheet and min 50 mm deep) with suitable modules white cover plate fixed with nickel polished screws etc including FRLS PVC insulated unsheathed multi stranded copper conductor 1.5 Sqmm single core as earth continuity conductor (green colour) connected with earth dolly with thimble complete all as specified and as directed by Engineer-in-Charge.Note :No more than 06 point on one circuit and separate conduit will be used for power circuit and light point circuit as per NBC code 2016.

Ditto all as per srl item No. 185.00 above, but for one fan point controlled by one switch complete all as specified.

Ditto all as per srl item No. 185.00 above, but for one bell point controlled by one bell push complete all as specified.

Ditto all as per srl item No. 185.00 above, but for one light point controlled by 2 Nos, two way switch complete all as specified.

Ditto all as per srl item No. 185.00 above, but for one socket outlet 5 Amps on independent board complete all as specified.

Ditto all as per srl item No. 185.00 above, but for one socket outlet 5 Amps on the same board controlled by one switch complete all as specified.

Ditto all as per srl item No. 185.00 above, but with 2.5 Sqmm (nominal area) FRLS PVC insulated unsheathed multi stranded copper conductor cable for one 3 Pin 15 Amp socket on independent board incl Modular cover plate and suitable metal sunken box of suitable modules including one 2.5 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable green colour 1100 volts grade as earth wire connected to earth dolly with all accessories complete all as specified and as directed. by Engineer-in-Charge

S&F for Modular switch piano flush type, 6 Amps, 240 Volt AC single pole, one way complete all as specified.

S&F for Modular switch piano flush type, 16 Amps, 240 Volt AC single pole, one way complete all as specified.

S&F for Modular socket out let 6 Amp, 5 pin, 2-in-1 flush type complete all as specified.

S&F for Modular socket outlet multi purpose 2 in 1, 5/6 pin, 6 & 16 Amps, flush type complete all as specified.

S&F for Modular switch piano flush type, 10 Amps, 240 Volt AC single pole, two way complete all as specified.

S&F for ceiling rose surface type PVC/ polycarbonate 65mm x 50mm three terminal complete all as specified.

S & F mini modular MCB 6 A-20 A SP C curve IS 608981:2002 ISI mark complete all as specified and as directed.

M&L for Hanging only/ fixing only ceiling fan 1200mm/1400mm sweep after repair & maintenance upto any height upto 5 Mtr complete incl making electric connections, testing complete all as specified and as directed

M&L for replacement of sub main wiring with two run of single core FRLS PVC insulated unsheathed multistranded copper conductor cable of 4 Sqmm drawn through in and including PVC rigid non metallic conduit (medium grade ISI marked) with all fittings including earth continuity FRLS PVC insulated unsheathed multistranded copper conductor cable 4.0 Sqmm PVC insulated with green insulation complete all as specified. NOTE:Two run of 4 sqmm wire and one run of 4 sqmm wire as earth wire including PVC conduit shall be measured as one unit.

Material and labour in replacement of sub main wiring with four run of FRLS PVC insulated unsheathed multistranded copper conductor single core cable 6 Sqmm drawn through in and including PVC rigid non metalic concealed conduit (medium grade) and one run of FRLS PVC insulated unsheathed multistranded copper conductor single core cable (green colour) of size 6 sqmm with any type of civil work involved to make good disturbed surfaces complete all as specified. Note : Four run(3P+01 N) of 6 sqmm wire and one run of 6 sqmm wire as earth wire and PVC concealed conduit shall be measured as one unit

Supply & fixing in replacement Deco ultra slim linear LED lighting fixutre with co-extruded polycorbonate body environmental friendly enegy efficent ready to use pack 20 W LED batten, minimum lumen efficacy 120 lumen/watt, cool white, operating voltage 140-270V AC complete all as specified & directed by Engineer-in- charge.

Fixing only serviceable tube light fittings any type and any description retrieved under item Srl No. 01, including necessary electric connection with round flexible wire with multi stranded copper conductor of size 0.50 sqmm, 3 core, 1100 volts grade complete all as directed.