SETTING UP OF OFFICE OF C PACE IICA MANESAR

Amount

Market Rate/NS

Providing and fixing of Glass door fittings i.e. Lock, Fllorspring, Handle complete in all respect.

ROLLER BLIND P/F roller blind mechanism. The roller tube shall be of extruded aluminium alloy with 32mm O.D. and a wall thickness of 2.0 mm. The tube shall be grooved with Snaploc Spline Mounting Channel. The roller tube shall have a Snap Loc Spline for easy installation, removal and cleaning of the fabric without tape or glue and without having to remove the tube or brackets. Drive and bracket shall be of Derlin and Galvanized Steel and the System shall accomodate a self lubricating spring which makes the drive reisistant to heat generated strains thus assuring a smooth function over along period. The drive Chain shall be of PVC with PVC Bead Chain. The beads shall be linked by a Bead Chain Connector. Bottom of the blind shall be of powder coated Aluminium tube and the tube shall be closed at ends with Side caps. FABRICS: fade and stain resistant, blackout fabric proving 5% opennesss, Finish and shade shall be as per Architect. All complete as per satisfaction of engineer-in-charge. (Make :- VISTA)

FROSTED FILM (CRYSTAL QUALITY) :- Providing and fixing scotchcal over glass surface with 15 yrs MCS warranty) as approval of the Architect. MAKE: 3M

FURNITURE

WORK TABLE + CREZENDA UNIT + BACK RUNNER UNIT Supply and Installation of Work Table , Side Crezenda , Back Runner & Padestal unit as per design in the following size Work Table 1830x 600 x 750 mm . Side Crezenda 1250 x 450 x 750 mm, Back Shelve Library Unit 2400 x 2400x 450 mm. Work Table top thickness 45mm, Modesty thickness 25mm , Gabel End thickness 30mm, Side Crezend Top 45mm, Sides and Shutter 25mm thick Back Runner top 45mm thick , sides and shutter 25mm thick. All exposed surfaces finished with laminate and unexposed surfaces finished with balancing laminate , complete with PU coatong and necessary hardware & fitting etc

1) CHAIR MAIN BACK ASSEMBLY: The seat is made up of insert moulded Polyurethane Foam upholstered with foam laminated mesh fabric. The insert moulded foam is assembled over a load bearing plastic seat cover. The back is made up of two piece injection moulded frame. The inner frame is upholstered with mesh fabric and mounted on the main assembly. The back has adjustable lumbar support for achieving comfortable seating posture. Sub Assembly Seat size = 52.5 cm Width, 51 cm Depth. Sub Assembly Back size= 48.5 cm Max Width, 62 cm Ht. Effective Back Ht from Seat = 57 cm 2) POLYURETHANE FOAM: The polyurethane foam for seat is moulded with density = 75 ±4 kg/m3 and Hardness = 34 ± 4. 3) ARMRESTS (ADJUSTABLE) : The armrest top is injection moulded in polyurethane and mounted on the injection moulded height adjustable type armrest. The armrest height is adjustable up to 4.5cm in 3 steps & width adjustable. ArmTop Out to Out Dim = 62 to 65 cm, ArmTop Centre to Centre Dim = 53 to 56 cm 4) FRONT PIVOT SYNCHRO MECHANISM: The mechanism is designed with the following features: - 3600 revolving type - Single point control - Front pivot for tilt with feet resting on ground ensuring more comfort - Tilt tension adjustment - 3position locking with antishock feature 5) CONNECTING SPINE BRACKET: spine bracket is made of Aluminium diecast piece connecting back with mechanism. 7) PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment of 8.5 cm. 8) PEDESTAL ASSEMBLY:Pedestal is made of Die cast Aluminium fitted with 5 nos. twin wheel castors (castor wheel dia. 6.0 cm). The pedestal is 65.0cm. Pitch center dia. (71.0 cm with castors). 9) TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in Nylon.

1) CHAIR SEAT/BACK ASSEMBLY: The seat is made up of insert moulded Polyurethane Foam upholstered with foam laminated mesh fabric. The insert moulded foam is assembled over a load bearing plastic seat cover. The back is made up of two piece injection moulded frame. The inner frame is upholstered with mesh fabric and mounted on the main assembly. The back has adjustable lumbar support for achieving comfortable seating posture. Sub Assembly Seat size = 52.5 cm Width, 51 cm Depth. Sub Assembly Back size= 48.5 cm Max Width, 62 cm Ht.Effective Back Ht from Seat = 57 cm 2) POLYURETHANE FOAM: The polyurethane foam for seat is moulded with density = 75 ±4 kg/m3 and Hardness = 34 ± 4. 3) ARMRESTS (ADJUSTABLE) : The armrest top is injection moulded in polyurethane and mounted on the injection moulded height adjustable type armrest. The armrest height is adjustable up to 4.5cm in 3 steps & width adjustable. ArmTop Out to Out Dim = 62 to 65 cm, ArmTop Centre to Centre Dim = 53 to 56 cm 4) FRONT PIVOT SYNCHRO MECHANISM: The mechanism is designed with the following features: - 3600 revolving type - Single point control - Front pivot for tilt with feet resting on ground ensuring more comfort - Tilt tension adjustment - 3position locking with antishock feature 5) CONNECTING SPINE BRACKET: spine bracket is made of Aluminium diecast piece connecting back with mechanism. 7) PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment of 8.5 cm. 8) PEDESTAL ASSEMBLY:Pedestal is made of Die cast Aluminium fitted with 5 nos. twin wheel castors (castor wheel dia. 6.0 cm). The pedestal is 65.0cm. Pitch center dia. (71.0 cm with castors). 9) TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in Nylon.

SINGLE SEATER SOFA Supplying and placing in position Single seater sofa of the following specifications. Overall size of the sofa shall be 710mm (W) x 860mm (D) x 800mm (H). The colour of the sofa shall be black. The spring of the sofa shall be pocket spring for soft and sinking feel. Sofa shall be pr8ovided with S spring to avoifd sinking feel. The polyurethane foam used for cushion only. there shall be a provision for pocket in the sides of the sofa. The work shall be carried out as per the instructions received from architect in charge.

Side TABLE Providing & placing in position center table with sizes 900mm dia, 400 mm high , Top made in 10mm tempered glass , understructure of CP teak wood with PU coating. The work shall be carried out as per the instructions received from the Architectcharge.

Supplying and placing conference room table – well shaped of the following dimensions. The conference table should be provided in modules of single seater and 2 seater. The dimensions for table should be 5270mm(L) x 920mm(W) x 750mm(H) . The worksurface top should be of thickness 36.6 (18mm + 18mm + 0.6 mm Decorative Laminate ). Edge profile 2mm Edgebanding 10mm radius on top edge and 5mm at bottom. The legs of the table should be Made from 36mm MDF (18+18) having a straight profile with half round edges and clad with 1.00mm thick MDF laminate of approved colour. Overall thickness of leg is 37.2mm. The modesty panels should be made from boards of 18mm thickness. The wire carrier should Made from 0.6mm thick CRCA painted. The carrier cover should be made of 12mm thk. MDF Painted all over.

Repair & Remodification of existing Electrical wiring and fititng along with end termination wherever required The work shall be carried out as per the instructions received from the Architect.

Providing & placing in position low height storages with sizes 450mm(W) X 450mm(D) X 450mm(H) with top made in 18mm particle board The work shall be carried out as per the instructions received from engineer in charge.

GLASS PARTITION:- Providing & Fixing Full Height Glass partition using 12mm Thk. Toughned Glass

Partition to be finished in combination of Fabric on magnetic board and writing glass immediately above worktop. All other sides to be finished in Fabric.

Worktop size 1500x600.

Each workstation to be provided with separate Three drawer Pedastal Unit.

Keyboard tray

CPU Trolley

Supply, installation, connecting ,testing and commissioning of the following components for IP- CCTV system complete as required. 1/2.7" CMOS IP Dome Camera , Picture Elements 1080p (1920 x 1080 pixels), Resolution 1080p / 720p / VGA, 30 FPS (All Resolutions) ,True Day/Night with Removable IR Cut Filter, IR Illuminator (25 Meter Max Effective Range) 850nm, Minimum Illumination 0.0001 (0.0 With IR Illumination), Dynamic Range 69dB, Compression( H.264, MJPEG), Bandwidth Configurable , Max Streams -4, Gain Control AGC, White Balance Auto / Manual / ATW , Backlight Compensation On/Off,3-9mm Vari focal.

Monitoring software video surveillance all channels real-time live monitoring simultaneously in single PC, Support for various video format : H.264, MPEG-4, MJPEG , Support for various video resolution: megapixel (1M, 2M, 3M), Full HD, 4CIF, Half D1, VGA, CIF, Powerful E-map based monitoring, Remote PTZ control and power area zoom, Support for various search and playback options : date and time based search : event (alarm, motion, intelligent video) based search: normal playback, backward playback, fast/slow playback, step playback , Notification in case of event occurring : highlighting in the border of video window : display event log message in real time, Back up capability : manual back up: AVI, REC1, SEC format, Multi-level user access and authority management , Support for multi-language user interface, Automatic search of network cameras for quick and easy configuration, Easy device management (configuration, firmware upgrade), inputs to ibms system complete as required.

24 port network switch with PoE cisco make

Supply Installation, Testing & Commissioning of Suitable storage for above cameras with storage capacity of 10 TB (to be provided) and provision (without storage) for 30 days recording space for storage rack of all cameras in 25 fps, 720 dpi resolution, 24x7 working in full capacity recording with 20% spare capacity, scalable upto 90 days. The vendor shall furnish detailed calculation for the same.

Wall mounted 6U closed racks with power supply complete as required for the network racks

Supply Installation, Testing & Commissioning of Intel i7 4th Generation processor 3Ghz, 4GB RAM with 2TB hard disk, DVD-RW/keyboard/optical mouse/LAN card/19” LED monitor. Minimum 6 USB ports. With pre-loaded licensed Windows 7 Professional software, software license for remote monitoring of CCTV system as per specifications.

Supply, installation, testing and commissioning of color high resolution LED monitor of comprising of 1 nos. 32 inch display complete with all supports, accessories.

RJ-45 outlets near the cameras

Media Converter SM/SFP Module

LIU to Media converter connectivity.

8 port loaded fiber LIU box with pigtails and couplers

SAHAI EXCLUSIVE CONTRACTS PVT. LTD.

VirenderKumarAndCo

SAHAI EXCLUSIVE CONTRACTS PVT. LTD.

VirenderKumarAndCo