REPAIR/REPLACEMENT TILING, JOINERY, PLUMBING AND OTHER MISC B/R WORK AND PERIODICAL SERVICES WK INCLUDING PLASTER WK AT VARIOUS BLDGS AT NCC OTA, UNDER AGE B/R-II KAMPTEE UNDER GE KAMPTEE

Amount

Dismantling of asbestos cement sheet (corrugated, semi-corrugated etc) sheets in roof coverings complete all as specified and as directed.

M & L for 0.50 mm thick prepainted galvalume aluminium zinc coating G.I. based corrugated steel sheet(AZ150) of any colour having tensile strength of 550 MPA as in roof covering, fixed with and including self tapping screw/J-type bolt/L-type bolt complete all as per manufacturer instructions.

M & L Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick (AZ150)of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/J-type bolt/L-type bolt complete all as specified and as directed.

S & F Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc. as in roof covering, fixed with and including self tapping screw/J-type bolt/L-type bolt complete all as per manufacturer instructions.

Dismantling of timber fillets,rails, posts, rafters, purlins under 40 Sq cm in section complete all as specifed and directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St.-240 complete all as specified and as directed.

S&F mild steel work such as roof trusses (framed), trussed, purlins, and heavy bracket framing (Beam, Tee, angle, Channel or flat section) including distance pieces, cleat etc complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards/slabs/blankets any thickness and wall paneling including cover fillets,complete all as specified and directed.

M&L for 4mm thick Non Asbestos, fibre cement building board of size 595x595mm size in ceiling fixed or laid/ inserted including GI powder coated snap grid framework for false ceiling comprising of the following section for making partition of 600x600 mm size fixed to wall with rawl plug and screw and hanged to roof with 4 mm dia GI suspended wire of suitable length and butterfly clip of size of main Tee shall be 32mmx15mmx0.30mm, cross tee shall be 32mmx15mmx0.30mm thick with black lining in mid portion and wall angle shall be 24mmx24mmx0.30mm thick complete all as specified and directed

S & F Solid PVC wall lining consisting of 5 mm thcik plain/wood grain printed colour PVC sheet inclusive cement and fixing at ste on PVC frame as per specified and drgs.

S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive offixing on to wall to make PVC Frame asper specification and drawing.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F Rolled mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with & including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails & guides) & hanging; also fastening & fixing complete Gde Fe 410-W (Gde-E- 250)quality-A, complete all as specified and as directed.

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and as directed.

Hacking out old broken glass (any thickness size and quality and description) from wooden/steel/aluminium frames glazed with putty or fixed with beads etc complete all as specified and directed

S&F 4 mm thick glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified and as directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

Taking down door / window frame with shutter (without taking of shutter from the frame ) area n. exc 1.50 sqm complete all as specified and directed.

Taking down door / window frame with shutter (without taking of shutter from the frame ) area exc 1.50 sqm but not exc 4 sqm complete all as specified and directed.

Taking down shutter of any description exc 1 Sqm but not exc. 2 Sqm each and removing from site complete all as specified and as directed.

S & F powder coating aluminium frame for doors, windows , ventilators with one or more rebates incl joining cleat for fixing etc. complete all as specified and as directed. (thickness or powder coating not less than 50 micron)

S&F powder coating aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing,02 Nos handles, anodised aluminium snap beading, screws, sliding wheels, including concealed SS body type arragement etc. complete all as specified and directed. (thickness or powder coating not less than 50 micron) Note-(i) Glass and other filling material in panels shall be measured and paid seperately

S&F powder coating aluminium window / ventilator shutters, sliding type, slides of two/three/four track without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, sliding wheels, including concealed SS body type arragement etc. complete all as specified and directed. (thickness or powder coating not less than 50 micron) Note-(i) Glass and other filling material in panels shall be measured and paid seperately

S&F powder coated aluminium ventilator louvers type section aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc louvers after open use in ventilator in order to allow air or light in while keeping sun in or moisture out complete all as specified and directed.(thickness or powder coating not less than 50 micron) Note-(i) Glass and other filling material in panels shall be measured and paid seperately

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint etc complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar beddeing (but not backing), removing serviceable tiles to store and debris complete all as specified and as directed.

M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding. 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15 mm thick screed bed of cement mortar (1:6) etc complete all as specified and as directed.

Material & labour for glazed ceramic coloured tiles 300mm x 450mm, on vertical surface such as skirtings/dados set and jointed in neat cement slurry and pointed in coloured cement to match and incl.10mm thick backing coat in CM 1:3 finished even and fair complete all as specified.

Materials and labour for light shade vitrified ceramic tiles 10mm thick (square/rectangular), polished, area of each tiles exc 0.42 sqm and n.exc 1.00 Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer in cement mortar 1:4 (including bodder tile) complete all as specified and as directed.

Materials and labour for light shade vitrified ceramic tiles 10mm thick (square/rectangular), polished, area of each tiles exc 0.42 sqm and n.exc 1.00 Sqm as in vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match and incl.10mm thick backing coat in CM 1:3 finished even and fair complete all as specified.

Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S&F toughned glass 12 mm thick as in hinged doors, partiotion automatic doors and similar work incl cutting to shape ,drilling holes,ss lock reqd incl all fittings complete all as specified and directed.

Taking up or down steel tubing 15 mm bore and connection complete all as specified.

Taking up or down steel tubing 20 mm bore and connection complete all as specified.

Supplying and laying of CPVC pipes 16 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and laying of CPVC pipes 20 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S & F Brass Elbow 16 mm for CPVC pipes complete all as specified and as directed.

S & F Brass Elbow 20 mm for CPVC pipes complete all as specified and as directed.

S & F Brass Tee 16 mm for CPVC pipes complete all as specified and as directed.

S & F Brass Tee 20 mm for CPVC pipes complete all as specified and as directed.

S & F Brass Union 16 mm for CPVC pipes complete all as specified and as directed.

S & F Brass Union 20 mm for CPVC pipes complete all as specified and as directed.

S & F Brass Ball Valve 16 mm for CPVC pipes complete all as specified and as directed.

S & F Brass Ball Valve 20 mm for CPVC pipes complete all as specified and as directed.

Dismantling water tank of capacity exc 500 ltr & not exc 1000 ltrs and removing to store of any description complete all as specified and directed

S & F 1000 ltrs capacity Rotational moulded multi layer polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in including 20mm bore PTMT float valve position including connections complete all as specified and directed.

Taking down existing water proofing treatment including PCC padding, mortar etc and disposal of rubbish outside of MD land and hacking for key, scrubbing down with water complete all as specified and directed.

M&L for provision of water proofing treatment by using APP torch on non woven polyster film reinforcement with 3 mm thick and weight not less than 3.00 kg/sq m over roof and vertical surfaces including preparation of surfaces and applying oil based bituminous primer coat @ 0.30 ltr per sqm on clean and dry surface and then providing APP membrane laid with 100 mm over lap on both sides all as per manufacturer's instructions including 15mm thick cement plaster in CM 1:4 with WPC and two coat of aluminium paint of 0.2Kg/Sqm over membrane complete all as specified and directed.

S&F 12 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive fixed in Aluminium doors, cabinet self,etc complete all as specified and as directed .

S&F in repair for curtain rails, mild /Stainless steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and as directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement and complete all as specified and as directed.

M & L preparing old decorated surfaces of walls by brooming down and applying one coat of white wash on walls including filling cracks and holes, including scaffolding for height upto (G+3) etc complete all as specified and as directed.

All as per item No 52 above but two coats of white wash including scaffolding for height upto (G+3) etc complete all as specified and as directed.

All as per item No 52 above but on ceiling complete all as specified and as directed.

Taking down cement plaster any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed.

M & L rendering 15 mm thick in cement mortar 1:6 in on surface of walls and finished even and smooth (without using extra cement) in patches complete all as spd & directed.

M & L rendering 10 mm thick in cement mortar 1:4 in on surface of walls and finished even and smooth (without using extra cement) in patches complete all as spd & directed.

M & L preparing new plastered surfaces of walls/chajja/lintel and applying two cement based paint white or tinted over a coat of alkali resistant primer complete as specified and directed.

M & L reparation of new plastered surfaces of walls and applying two coats of acrylic distemper on walls,white or tinted over a coat of chalk whiting , through mechanical applicator complete all as specified & directed.

All as per item No 59 here-in & before but one coat primer with putty, through mechanical applicator complete all as specified & directed.

M & L preparation of old decorated surfaces, washing , rubbing down, stopping and applying one coat of cement base paint on walls including scaffolding for height upto (G+3) etc white or tinted complete all as directed.

M & L for complete removal of existing surface and applying two coat of cement base paint on walls including scaffolding for height upto (G+3) etc white or tinted complete a directed.

M & L for preparing old plastered surfaces of wall by scrapping down smoke dust, moulds, moss and efflorescent salts and removing oily and greasy spots etc and applying one coat of acrylic distemper, white or tinted, through mechanical applicator complete all as specified and directed.

All as per item No 63 above but applying two coats of acrylic distemper through mechanical applicator complete all as specified and directed.

All as per item No 63 but on ceiling complete all as specified and directed.

M & L complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means and appying two coat of acrylic distemper over a coat primer over wall putty through mechanical applicator incl scaffolding etc complete all as specified and directed.

M & L complete removal of existing treatment of old plastered surfaces on wall including brooming down or steel wire brushing ,scrapping down moulds, washing down and applying two coat of exterior grade emulsion weather proof paint over a coat of acrylic primer through mechanical applicator complete including scaffoldings for height upto (G+3) etc complete all as specified and as directed.

M & L of prepartaion of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint through mechanical applicator (Ordinary tint), any colour complete all as specified and directed.

M & L of prepartaion of old painted steel work of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint any colour through mechanical applicator complete all as specified and directed.

Obliterating old writing of any description , n exc 0.1 Sqm with paint to match existing work complete all as specified and as directed.

Writing letters or figures (Block, Roman, Italic or Indian) n.exc 30 cm high complete all as specified and directed.

NOTES FOR ITEM NO. 59, 60, 63, 64,66,67,68,69 :- (a) The work pertaining to smart periodical services shall be executed by authorized applicator through manufacturer of which the materials .i.e. Paint, Distemper, Putty etc. is proposed to be used by the contractor and approved by GE. (b) Cost of scaffolding etc of building shall be included in the quoted rate. (c) The contractor shall upload MOU letter with any one of manufacturer and also with their authorised applicator mentioned in the tender alongwith their bid in cover-I failing which his bid will be rejected. Authorised applicator shall have valid authorisation letter from the manufacturer (Minimum regional HQs) and shall have been issued not less than 30 days from the date of commencement of the work. The authorisation letter needs to be valid for the complete period of execution of the painting work. (d) After preparation of the surface, Engr-in-Charge shall approve the same before applying primer and finishing coats. (e) Building wise stage passing register shall be maintained and shall be signed by Engr-in-Charge and contractor. (f) The equipments to be used in the work shall be certified by the manufacturer with whom the MOU been entered into. (g) Contractor shall submit approved company generated 05 years warranty card at the time of submission of RAR & Final Bill.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs. 45,910.00]

DIVESH HARISH SIRIAH (BID ID -3492887)

M/s ABHIMAN HEGDE (BID ID -3491778)

M/s Jagdish Staioners and General Stores (BID ID -3491746)

M/s T.S.JOHAR (BID ID -3493448)

M/s Rahul Traders (BID ID -3488129)

M/s Rana Construction (BID ID -3493166)

S R BUILDERS (BID ID -3492799)