REPAIR TO WOODEN FURNITURE UNDER GE NARANGI

Amount

REPAIR TO SIDE BOARD /BOOK CASE / BIN SOILED LINEN MULTI PURPOSE, (FD-26/241) , (FD-287) , FD/E6/MAP/09

Removing the existing unserviceable/ broken shutter of side board and supply and fix new shutter made of 18 mm thick prelaminated MDF Board exterior Grade one side teak face and other side balancing white with 40 mm wide brass coated continuous piano hinges including aluminium anodised bow handle, 100 mm long, and 02 Nos knob and magnetic catcher to stick the doors alongwith teakwood beading 6mm thick all around, complete all as specified and shown in drg. (NOTE: Each leaf to be measured separately).

Removing the unserviceable broken back ply of side board and supply and fixing new 6 mm thick BWR grade plywood all as specified and shown on drg.

Removing the unserviceable/ broken drawers of side board and supply and fixing new drawers made of front 18 mm thick prelaminated MDF Board exterior Grade one side teak face and other side balancing white and bottom of drawer with 6 mm thick BWR grade plywood and also fixing of 40 mm knob complete all as specified and shown on drg.

Preparation of surface and French polishing to side board inner and outer except prelaminated portion complete all as directed.

REPAIR TO TABLE DINING 6 person (FD-273)

Removing the existing unserviceable/ broken top of Table dining 6 person and supply and fix new top of prelaminated MDF Board exterior grade of 18 mm thick both side laminated duly covered with teakwood beading 6mm thick half round all around, complete all as specified.

Removing the existing unserviceable/ broken top long rail of Table dining 6 person and supply and fix new long rail made of 1st class hard wood teak of size as shown on drawing complete all as specified.

Removing the existing unserviceable/broken top short rail of Table dining 6 person and supply and fix new short rail made of 1st class hard wood teak of size as shown on drawing all as specified.

Removing the existing unserviceable/ broken leg of Table dining 6 person and supply and fix new leg made of 1st class hard wood teak all as specified and shown on drg.

Preparation of Wooden surface and applying French polishing to Table dining 6 person except laminated portion complete all as directed.

REPAIR TO TABLE DRESSING LADIES ,FD-32/251 & 378/FD/MAP-II/07)

Removing the existing unserviceable/ broken drawers of Table dressing ladies and supply and fix new drawers front made of 18 mm thick prelaminated MDF board and bottom of drawer with 6 mm thick BWR grade plywood duly fixed with aluminium anodised knobs 40 mm complete all as specified and shown on drg.

Removing the existing unserviceable/ broken mirror with 6mm thick back plywood of Table dressing ladies and supply and fix new mirror minimum 5 mm thick suitable for the existing frame alongwith 6mm thick BWR grade plywood back all as specified and shown on drg.

Preparation of old surface and French polishing to Table dressing ladies except laminated portion all as directed.

REPAIR TO TABLE DINING FOUR PERSON 1200 x 900MM , FD-273

Removing the unserviceable /damaged top of table dining and supply and fixing new top made up of 18 mm thick MDF Board exterior grade both side laminated duly covered with teakwood beading 6mm thick half round all around, complete all as specified.

Removing the unserviceable /broken legs of table dining and S&F new leg made of 1st class hard wood all as specified and as shown on drg. (each leg will be measured separately)

All as per item No 4.02 here-in-before but top long rails of table dining (Each rail will be measured separately).

All as per item No 4.02 here-in-before but top short rails of table dining (Each rail will be measured separately).

Preparation of old surface and french polishing to table dining complete all as directed.

REPAIR TO TABLE 900x600x760 MM W/O DRAWER, FD 42/284

Removal of unserviceable leg and S&F new leg made of 1st class hard wood teak for table of size complete all as specified & shown on drg.

Removal of unserviceable long stiffener under the top and S&F new long stiffener made out of 1st class hard wood teak for table of size all as per drg and complete all as per specification and directed.

Removal of unserviceable top and S&F new top made out of 18 mm thick prelaminated MDF board of size 900x600mm exterior Grade both side laminated with teakwood beading 6mm thick half round all around, complete all as specified.

M&L for french polishing of complete table exposed to view except laminated portion complete all as per specified and as directed.

REPAIR TO TABLE 900x600x760 MM WITH DRAWER , FD-41,224,283

Removal of unserviceable leg and S&F new leg made of 1st class hard wood teal for table of size all as per drg and complete all as per specification and as directed.

Removal of unserviceable top long rail and S&F new front top long rail made out of 1st class hard wood teak for table of size all as per drg and complete all as per specification and as directed.

Removal of unserviceable long stiffener under the top and S&F new long stiffener made out of 1st class hard wood teak for table of size all as per drg and complete all as per specification and as directed.

Removal of unserviceable drawer and S&F new drawer front and sides made out of 18 mm thick MDF Board exterior grade both side laminated , 6mm thick (BWR Gde)plywood at the bottom of drawer with aluminium anodised knob of approved quality all as per drg and complete all as per specification and as directed.

Removal of unserviceable stiffener and S&F new stiffener to accommodate drawer made out of 1st class hard wood for table Size all as per drg and complete all as per specification and as directed.

Removal of unserviceable top and S&F new top made out of 18 mm thick MDF Board exterior grade both side laminated duly covered with teak wood beading 6mm thick half round all around, complete all as specified.

M&L for french polishing of complete table exposed to view except laminated portion complete all as per specified and directed.

REPAIR TO TABLE BED SIDE ( FD-276, 248)

Removal unserviceable plywood at back of table bed side and S&F plywood 6mm thick BWR Gde as per drg and complete all as directed.

M&L for french polishing of complete table exposed to view except laminated portion per drg and complete all as specified and as directed.

Removal of unserviceable Top and S&F new top of size 230mm X 450mm made out of 18mm thick MDF board exterior Grade one side teak face and other side balancing white and beading around the top as per drg and complete all as per specification and as directed.

REPAIR TO TABLE WRITING (FD- 33, 249 & 275)

Removal of unserviceable leg and S&F new leg made out of 1st class hard teak wood as per drg and complete all as specified and as directed.

Removal of unserviceable knob/handle of drawer from front shutter of cabinet and S&F new aluminium anodised knob/ handle heavy duty of quality as per sample available as per drg and complete all as specified and as directed.

Removal of unserviceable side of cabinet of table and S&F new side of cabinet made out of Prelaminated MDF board 18mm thick exterior Grade one side teak face and other side balancing white and as per drg and complete all as specified and as directed.

Taking out unserviceable shutter of cabinet and S&F new shutter made out of MDF board exterior Grade one side teak face and other side balancing white 18mm thick and duly covered with 6mm thick teakwood beading with mild steel chromium plated piano continuous hinges throughout with MS screw of appropriate size as per drg and complete all as specified and directed.

Removal of unserviceable top and S&F new top of size 1145mm x 600mm made out of MDF Board exterior grade of 18mm thick both side laminated duly covered with teakwood beading 6mm thick half round all around, complete all as specified.

M&L for french polishing of complete table exposed to view except laminated portion all as specified and as directed.

REPAIR TO TABLE 900x900x760 MM W/O DRAWER , FD-88M

Removal of unserviceable leg and S&F new leg made of 1st class hard wood (teak wood) for table of size all as per drg and complete all as per specification and as directed.

Removal of unserviceable top long rail and S&F new front top long rail made out of 1st class hard wood teak for table of size all as per drg and complete all as per specification and as directed.

S&F H type stiffener made out of 1st class hard wood (teak wood) of size 30X30 mm complete all as specified and directed.

Removal of unserviceable top and S&F new top made out of 18 mm thick MDF Board exterior grade one side laminated duly covered with teakwood beading 6mm thick half round all around, complete all as specified.

M&L for french polishing of complete table exposed to view except laminated portion complete all as per specified and directed.

REPAIR TO CHAIR EASY ,(FD-17(M),202 & 229)

Removing the existing unsv/broken rear leg and supplying and fixing 1st class hard wood teak rear leg complete all as specified and shown on drgs (Each leg shall be measured separately).

Removing the existing unserviceable/ broken front leg and supplying and fixing 1st class hard wood teak front leg complete all as specified and shown on drgs (Each leg shall be measured separately).

Removing the existing unserviceable/ broken arm rest and supplying and fixing 1st class hard wood teak arm rest complete all as specified and shown on drgs (Each arms shall be rest measured separately).

French polishing to wooden surfaces of repaired chairs (old and new surfaces) complete all as specified and shown on drgs.

REPAIR TO CHAIR DINNING ,(FD-16,FD-228 & FD- 279)

Removing the existing unserviceable/Broken rear leg and supplying and fixing 1st class hard wood teak rear leg complete all as specified and shown on drgs (Each leg shall be measured separately)

Removing the existing unserviceable/ broken front leg and supplying and fixing 1st class hard wood teak front leg complete all as specified and shown on drgs (Each leg shall be measured separately).

Removing the existing unserviceable/ broken fillet of canning and supplying and fixing 1st class hard wood fillet for canning including drilling holes at 12.5 mm c/c complete all as specified and shown on drgs.

Removal of unserviceable back rest batten and S&F new back rest batten made out of 1st class hard wood teak of size as per drg complete all as specified and as directed.

French polishing to wooden surfaces of repaired chairs (old and new surfaces) complete all as specified and shown on drgs).

REPAIR TO CHAIR WRITING ,(FD-20, FD-250 & FD- 280)

Removing the existing unserviceable/ broken rear leg and supplying and fixing 1st class hard wood teak rear leg complete all as specified and shown on drgs (Each leg shall be measured separately)

Removing the existing unserviceable/ broken front leg and supplying and fixing 1st class hard wood teak front leg complete all as specified and shown on drgs (Each leg shall be measured separately)

Removing the existing unserviceable/broken arm rest and supplying and fixing 1st class hard wood teak arm rest complete all as specified and shown on drgs (Each arm shall be rest measured separately)

French polishing to wooden surfaces of repaired chairs (old and new surfaces) complete all as specified and shown on drgs.

REPAIR TO CHAIR WOODEN BOTTOM ,(FD-56,FD-225 & FD-285)

Removing the existing unserviceable/ broken seat ply and supplying and fixing new seat made out of 6 mm ply wood commercial face veneer on both sides including drilling holes complete all as specified and shown on drgs

French polishing to wooden surfaces for repaired chairs (old and new surfaces) complete all as specified and shown on drgs.

REAPIR TO CHAIR DINNING WITH PVC SEAT (FD/MAP-II/05)

Removing the existing unserviceable/Broken rear leg and supplying and fixing 1st class hard teak wood rear leg complete all as specified and shown on drgs (Each leg shall be measured separately)

Removing the existing unserviceable/ broken front leg and supplying and fixing 1st class hard wood teak front leg complete all as specified and shown on drgs (Each leg shall be measured separately).

Removing the existing unserviceable/ broken PVC Seat of Chair Dining and S&F new PVC Seat of Make: Cello / Brite/ Swastic/Harmony complete all as specified and shown on drgs.

Removal of unserviceable back rest batten and S&F new back rest batten made out of 1st class hard wood teak of size as per drg complete all as specified and directed.

French polishing to wooden surfaces of repaired chairs (old and new surfaces) complete all as specified and shown on drg).

COMMON ITEMS FOR CHAIRS ,(FD-FD-17,20,250 & 280) (FD-16,228 & FD- 279) (FD-202, 229 )

Removing the existing unserviceable/ broken plastic cane and supplying and canning with new plastic cane 2 mm wide and 4 mm for borders for canning of chair of all types including couch with detachable chair, bin soiled linen, stool dressing complete as per Godrej pattern.

Supply & fix stiffeners for chairs made out of 25 X 25 mm 1st class hard wood teak after removing the existing unserviceable stiffeners complete all as specified and as shown on drgs.

FRENCH POLISHING TO WOODEN FURNITURE

M&L for smoothening surface with sand paper of bin soiled linen for multipurpose for repolishing the old polished surface with one coat of french polish complete all as specified and as directed .(FD/E6/MAP/09)

M&L for smoothening surface with sand paper of stool dressing for repolishing the old polished surface with one coat of french polish complete all as specified and directed. (FD-27(M)

M&L for smoothening surface with sand paper of Hat stand with mirror for repolishing the old polished surface with one coat of french polish complete all as specified and directed. ( FD-233)

M&L for smoothening surface with sand paper of Table office clerk wooden for repolishing the old polished surface with one coat of french polish complete all as specified and directed. (DB-4120)

M&L for smoothening surface with sand paper of Table one piece all purpose for repolishing the old polished surface with one coat of french polish complete all as specified and directed.(DB-1092)

M&L for smoothening surface with sand paper of Book Shelf open large for repolishing the old polished surface with one coat of french polish complete all as specified and directed.(DB-4122)

REPAIR TO CHAIR DINNING CUSHIONED (FD/MAP-II/04)

Removing the existing worn out seat cushion and S&F new PU foam seat foam of size 450X450X75mm thick, density 50-55 Kg/cum with 12 mm thick plywood BWR grade phenol bonded covered with tapestry cloth for chair dining cushioned complete all as specified and shown on drawing.

Preparation of surfaces and french polishing to wooden surfaces for repaired chairs and applying two or more coat French polish on new surfaces and one coat on old surfaces to match uniform shade complete all as specified and shown on drg.

REPAIR TO TABLE CENTRE/PEG TABLE/TEAPOY

Removing the existing unserviceable table top centre and S&F new top made out of 18 mm thick pre laminated MDF board exterior grade duly edging with 6mm thick beading including French polishing to wooden surface to match the existing surfaces of repaired table centre apply one coat French polish on new surfaces and one coat on old surfaces to match uniform shade complete all as specified and shown on drawing. (FD-274)

All as per item Ser No 18.01 above but top of Peg Table. (FD-277,384)

All as per item Ser No 18.01 above but top of Teapoy (FD-382)

REPAIRS TO SOFA SET 4/5 SEATER SEAT (FD-281)

Replacement of existing foam cushion of Sofa including existing tapestry cloth of sofa set 4/5 seater, and supply & fix new PU Moulded Foam of density 50-55 kg per cubic meter of size 560 x 535 x 100mm thick, duly stitched with tapestry cloth and closed with Velcro of suitable size complete all as directed and shown on drg . Note: (The cost of tapestry cloth shall not be less than Rs. 350.00 Per RM).

Replacement of cover of tapestry cloth of cushion of sofa and supply & fix new cover of tapestry cloth on existing foam cushion with Velcro on one edge of best quality. The cost of tapestry cloth shall not be less than Rs 350/- per meter.

Removing unsv long rail of front or back side of three seater sofa set and supply and fix new long rail made out of first class Hard Wood teak of size 1590x100x35mm duly french polished complete all as specified and as shown on drgs.

Removing unsv short rail of any side of sofa set 4/5 seater and supply and fix new short rail made out of first class Hard Wood teak of size 525x100x35mm duly french polished complete all as specified and as shown on drgs.

Removing unsv wooden bearer of any side of sofa set 4/5 seater and supply and fix new wooden bearer made out of first class Hard Wood teak of size 525x40x40mm duly french polished complete all as specified and as shown on drgs.

Removing unsv wooden Arm of any side of sofa set 4/5 seater and supply and fix new wooden Arm made out of first class Hard Wood teak of size 525x40x40mm duly french polished complete all as specified and as shown on drgs.

M&L for smoothening surface with sand paper of Sofa set five seater for repolishing the old polished surface or unpolished surface of sofa with one coat of french polish both above and below the sofa complete all as specified and directed.

M&L for smoothening surface with sand paper of Sofa set four seater for repolishing the old polished surface with one coat of french polish complete all as specified and directed.

REPAIRS TO STOOL DRESSING CUSHION

Replacement of existing foam cushion of Stool dressing cushion seat including existing tapestry cloth of Stool dressing cushion seat, and supply & fix new PU Moulded Foam 50-55 kg per cubic meter density of size 400 x 330 x 80mm thick, duly stitched with tapestry cloth and closed with Velcro of suitable size complete all as directed and shown on drg . (FD/E6/MAP/14). Note: (Tapestry cloth shall not be less than Rs. 350.00 Per RM).

REPAIR TO BED PLY WOOD TOP (FD-21/245/246)

Removing the existing unserviceable/ broken long rail and supplying and fixing new 1st class hard wood teak long rail for charpoy wooden including French polishing all as specified and shown on Drg (Each long rail shall be measured separately).

Removing the existing unserviceable/broken head board including legs and supply & fixing new head board for bed ply wood top including teak wood legs and French polishing complete all as specified and shown on drg

Removing the existing unserviceable /broken foot board including legs and supply & fixing new foot board for bed plywood top including teak wood legs and French polishing complete all as specified and shown on Drgs.

Removing the existing unserviceable /broken ply wood top and supply and fixing new 12 mm thick BWR plywood exterior grade complete all as shown on Drg and as specified.

REPAIRS TO TRESTLE WOODEN (FD-96M)

Removing existing unsv legs of trestle store room wooden and S&F new legs made out of 1st class hard wood teak of size 300x100x100mm as per drg .

Removing unsv long rails of trestle and S&F new Long rails made out of 1st class Hard Wood teak of size 2450x100x100mm

Removing unsv vertical stiffeners of trestle and S&F new stiffeners made out of 1st class Hard Wood teak of size 400x100x65mm

Removing unsv horizontal stiffeners of trestle and S&F new stiffeners made out of 1st class Hard Wood teak of size 600x100x65mm

M&L for smoothening surfaces with sand paper of Trestle wooden and repainting the old painted surface with one coat of synthetic enamel paint black colour complete all as specified and directed.

RK STEEL FABRICATORs

M/S K Nath and co