REPAIR REPLACEMENT OF BOUNDARY WALL GATE FENCING DRAINAGE PATH AND OTHER MISC WORK UNDER AGE BR II OF GE NORTH MEERUT CANTT

Amount

Excavation in trenches n exc 1.5 m wide and n exc 1.5 m depth in soft/ loose soil for foundation etc or for shaft, wells, manholes,pier holes etc n exc 10 Sqm on plan and not exc 1.5 m in depth and getting out and levelling of bottom surface to required level complete all as specified and directed.

Returning, filling in including spreading, levelling watering and well ramming of soft/loose soil in layers n exc 25 cm thick each complete all as specified and directed.

Excavation in post holes (or similar holes) n.exc 0.50 cum, each in soft/ loose soil , getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed.

Surface dressing in soft/loose soil n exc 15 cm deep trimming of natural ground (removing vegetation/shurbs/ brushwood. Undergrowth and carring away rubbish to a distance of 50 metre complete all as specified and directed.

Removing excavated material ( spoil ) exc 250m but not exceeding 500 m distance and depositing where directed at a level n exc 1.5 metre above the starting point complete all as specified and directed.

M& L for providing Cement concrete 1:2:4 Type B 2 (using 40 mm graded crushed stone aggregates), in foundations, filling and mass concrete complete all as specified and directed.

M&L for providing Cement concrete 1:3:6 Type C 2 (using 40 mm graded crushed stone aggregates) in suface channels and drains including necessary form work, stops, moulds etc complete all as specified and directed.

M&L extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed. Note :- Inner girth only measured.

M&L for providing cement concrete 1:2:4 Type B 1 (using 20 mm graded crushed stone aggregates) cills, steps; seismic and other similar bands, plinth courses, copings, kneelers, apex stones, bed plates and the like including weathering, slightly rounded or chamfered angles and throating, including necessary form work complete all as specified and directed.

M&L for providing reinforced cement concrete 1:2:4 (nominal mix) type B 1 (using 20 mm graded crushed stone aggregates) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete complete all as specified and directed.

M&L for providing reinforced cement concrete 1:2:4 (nominal mix) type B 1 (using 20 mm graded crushed stone aggregates) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for Brickwork with fly ash old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

All as per Srl item No 12 here-in-before but except bricks

M &L for Brickwork with fly ash bricks old size bricks straight or curved on plan exc 6m mean radius built in Cement mortar 1:4 complete all as specified and directed.

All as per Srl item No 14 here-in-before but except bricks

M&L for providing formwork to sides of concrete foundations, footings, bases of columns raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished surfaces of concrete flat complete all as specified and directed.

M&L for providing formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, exc 1.5m clear span cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc rough finished surfaces of concrete flat complete all as specified and directed.

S&F mild steel work as for posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) . including necessary riveting and / or welding and similar work conforming to Fe 290 gde E 165 complete all as specified and directed.

Supplied and fixed mild steel screw bolts hot dip galvanised (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut 5-10 mm dia of neck and exc 5cmbut n.exc 10cm long, complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia quality conforming to Fe- 415, Fe 500 or Fe-550 as in steel reinforcement for concrete complete all as specified and directed. Note :- Weight of binding wire shall not be considered for measurement and payment purpose.

All as per Srl item No 20 here-in-before but 6mm to 8mm dia

S & F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. Note : Each line wire to be measured

M&L for laying 75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) as in floor/plinth protection, cement concrete surfaces finished even & fair without using extra cement complete all as specified and directed.

M&L in repair for laying 60 mm thick machine pressed precast PCC coloured interlocking paver block moulded in PVC frame / mould any shape and size conforming to IS 15658-2006 of M-35 grade of approved design with gray cement and pigment to match shade / colour / matrix of tiles set and bedded over and including 50mm thick fine river washed sand duly compacted with surface vibrator laid over compacted sub soil in flooring complete all as specified and directed. Make : NITCO, Mumbai ; Redsun tiles & Pavers, panchkula ; Star Tiles & Industries, Rama Devi, Kanpur ; Mayur tiles & Interlocking Pavers, Lucknow ; Mehatab tiles, indore ; Tulip Infrastructure, Saharanpur (U.P)

M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site complete all as specified and directed.

M&L for preparing the newly plastered surfaces and applying two coats of cement base paint on walls / vertical surfaces complete all as specified and direcrted.

M&L for preparing of old decorated surfaces of walls ( plastered or un plastered ) including cornices pilasters etc and applying one coat of cement base paint complete all as specified and directed.

M&L for preparing of old decorated surfaces of walls ( plastered or un plastered) including cornices, pilasters etc and applying one coat of oil bound distemper, after repairing rough surfaces & small holes with wall care putty wherever required complete all as specified and directed

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

Demolition of brick work or rubbled stone masonry including all quoins arches , pillars etc built in cement mortar and including removal from the site complete all as specified and directed.

Demolition of cement concrete in ground floors and paving n.exc 15cm thickness(below or above ground level) and including removal of debris & rubbish from the site complete all as specified and directed. Note : Stone slabs / tiles and hard core of any description shall not be measured & paid under this item.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Dismantling of fencing post or struts (wood, steel, RCC) any section , post embedded in concrete , brick work, masonry etc , including taking out embedded portion and making good distrubed ground complete all as specified and directed.

Dismantling of fencing wire mesh any type any size complete all as specified and directed

S&F 4mm dia galvanised steel wire 100 x 100mm mesh made up into mattresses or cages, lapped wired and laid in position including closing after filling complete all as specified and directed

Dismantling of trellis work (jafri) including taking as under of battens in trellis complete all as specified and directed

M&L for providing precast cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregates) louvres and jallies, 50 mm thick (measured solid), including necessary reinforement wire and all mouldings but excluding frame and set in cement mortar 1:6 complete all as specified and directed.

M&L providing cement concrete type C-1 1:3:6 (20mm graded aggregate)in side of paver block,rounded or chamfered on edge complete all as specified and directed

veer enterprises

Arun Construction Co.

M/S AMAR ELEKTRO CENTRE

SHAKTI CONSTRUCTION CO

Manglam Engineers and Construction Co

GANGA ENTERPRISES

Tridev Construction Company