Installation of Closed Combustion Cremation Furnace under Budget Declaration 2026-27 at Rawan Teela Shamshan Lalsot Road Dausa

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level :

1:1½:3 (1 Cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).

Providing corrugated G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

1.00mm thick with zinc coating not less than 275gm/m²

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete:

NON BSR - 1 SITC of Antyesthi Yantra with following specification - (A) Body MS. Sheet size 3mm & 2mm angle structure 50*50*5mm MS (B) Lining Fire bRick alumina 30% with ceramicsboard thickness 50 mm capacity 1260 C. (C) White heat Castable (k) and accost (50) for fire bricks feting (D)Angle 65*65*10 & 35*5 SS 304 grade (E) Rod 30 mm 370 mm SS 304 grade (F)Pipe OD 40mm thickness 5mm SS 304 grade (G) Ceramic Blanket (64D)total bolts & nut MS / SS (H)Thermostat Size 20mm OD *450 mm length (I)Control Panel auto and Manual Both with change over / 2 way switch (J)Blower complete wiith fan size 305 mm with Motor 1 HP motor 2 nos (k) Chimni Length 3 meter size 350x350mm taper sheet thikness 3 mm with ceramic board lining. (L) Ceramics board fitting 50 mm and 25 mm (M) Both side SS door with lock size - 600 x 550 mm thickness 4 mm SS 304 grade 50 mm ceramic board and ceramic blanket (NI Sliding Trolly alignment bed angle size 50x50mm + 35x35mm + strip, length 4.5 meter(O) Sliding Trolly cover 1750 x 1 180 x 440 mm sheet size 3 mm with bearing roller (P)Sliding Asthiya & Ash collecting TreySize 2200 x 350 x 110 mm sheet thickness 3 mm with roller SS 304 gradeQ) Coated with heat resistance paint with capacity of 600 degree silver color (R) Two step fabricated checker plate and angle size 6'x2'x1' qty 2 including loading , unloading and transportation

NON BSR - 1 SITC Of inverter with batteries with - O/P voltage - 220 V , O/P current 12 amp AC Nominal , I/P current 12 amp AC max , O/P power - 2 KVA , Power factor - 0.8 , frequency - 50 Hz Including 12 V 150 Ah Battery Rack and Battery bank comprising SMF/ VRLA batteries , inter- connection wiring etc as required complete in all respect .