Loading
Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹2.6 Craccepted-aoc | ₹2.6 Cr | accepted-aoc |
Tender Value
₹2.5 Cr
EMD Value
₹3.8 L
Closing Date
20 Sept 2025, 9:30 pmClosed
Rural Development and Panchayat Raj Department
SHRUTHI.N.C
Construction of Community hall Near Sri. Veerajaneyyaswamy Temple at Bhuhalli Village in Channapatna Taluk, Ramanagara Dist
RDPR/2025-26/BD/WORK_INDENT17191
RDPR/2025-26/BD/WORK_INDENT17191
Open
Buildings
Two Tender Document System(Two Cover)
RDPR Division Office Ramanagaar
7 documents required · 7 mandatory
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
To qualify for award of this contract, Each tenderer in his/her name should have in the last five year i.e, 2020-2021 to 2024-25 Satisfactorily completed, as a prime contractor, for at least one similar work of value not less than Rs. 125.27Lakhs
To qualify for award of this contract, each Tenderer in its name should have in the last five years (2020-21 to 2024-25), executed in any one year for a continuous period of 12 months the minimum quantities of work 1) Earthwork-819.00 Cum, PCC/RCC-441.31, Steel-36.40 Tonne, SSM/CCB/BBW-190.67 cum, Plastering-3215.05, Flooring-1465.68 Sqm
The Tenderer shall obtain the work done certificate in the prescribed form from the competent authority not below the rank of Executive Engineer (District Level Officer) and scan the Original Certificate and attach the scanned file to the Bid. The Original Certificate / Certificates shall be produced whenever required.
The Tenderer should possess valid Registration Certificate.
Achieved in at least two financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs.501.06 Lakhs during the last five financial years (2020-21 to 2024-25).
Liquid assets and /or availability of credit facilities of no less than Rs.75.16 Lakhs (Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc) as per the format issued by the Government Circular Dated:22.08.2022.
The bidder must submit last 5 years Profit and loss account obtained from Chartered Accountant (CA) Only.
All other document uploads as per bid documents.
₹5,000
₹3.8 L
20 Sept 2025
12 Sept 2025
22 Sept 2025
17 Sept 2025
16 Sept 2025
Construction of Community hall Near Sri. Veerajaneyyaswamy Temple at Bhuhalli Village in Channapatna Taluk, Ramanagara Dist
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
AS per recommendations of technical working group rates for form work shall be added on percentge basis to the finished concrete item rate as per table- Addendum I SI NO.1a Roof slab of building perce...
Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggr...
AS per recommendations of technical working group rates for form work shall be added on percentge basis to the finished concrete item rate as per table- Addendum I SI NO.9 RCC Columns / Shaft (Slip Ce...
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) ---- with all lead and lift and loading and unloading charges cost and conveyance ...
AS per recommendations of technical working group rates for form work shall be added on percentge basis to the finished concrete item rate as per table- Addendum I SI NO.15-16 RCC RCC Roof Slabs and s...
Refilling available earth around trenches/pipelines, cables in layers notexceeding 20 cms in depth, compacting each deposited layer by ramming afterwatering with a lead upto 50 m, and lift upto 1.5 m....
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with alllifts and lead, transportation to site, spreading, ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m ...
AS per recommendations of technical working group rates for form work shall be added on percentge basis to the finished concrete item rate as per table- Addendum I SI NO.9 RCC Columns / Shaft (Slip Ce...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m ...
AS per recommendations of technical working group rates for form work shall be added on percentge basis to the finished concrete item rate as per table- Addendum I SI NO.9 RCC Columns / Shaft (Slip Ce...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m ...
AS per recommendations of technical working group rates for form work shall be added on percentge basis to the finished concrete item rate as per table- Addendum I SI NO.9 RCC Columns / Shaft (Slip Ce...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
AS per recommendations of technical working group rates for form work shall be added on percentge basis to the finished concrete item rate as per table- Addendum I SI NO14 RCC Beams, Lintels & Troughs...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
AS per recommendations of technical working group rates for form work shall be added on percentge basis to the finished concrete item rate as per table- Addendum I SI NO14 RCC Beams, Lintels & Troughs...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
AS per recommendations of technical working group rates for form work shall be added on percentge basis to the finished concrete item rate as per table- Addendum I SI NO14 RCC Beams, Lintels & Troughs...
AS per recommendations of technical working group rates for form work shall be added on percentge basis to the finished concrete item rate as per table- Addendum I SI NO16 Stair Case and other Smilir ...
AS per recommendations of technical working group rates for form work shall be added on percentge basis to the finished concrete item rate as per table- Addendum I SI NO16 Stair Case and other Smilir ...
AS per recommendations of technical working group rates for form work shall be added on percentge basis to the finished concrete item rate as per table- Addendum I SI NO14 RCC Beams, Lintels & Troughs...
AS per recommendations of technical working group rates for form work shall be added on percentge basis to the finished concrete item rate as per table- Addendum I SI NO14 RCC Beams, Lintels & Troughs...
AS per recommendations of technical working group rates for form work shall be added on percentge basis to the finished concrete item rate as per table- Addendum I SI NO14 RCC Beams, Lintels & Troughs...
AS per recommendations of technical working group rates for form work shall be added on percentge basis to the finished concrete item rate as per table- Addendum I SI NO15Roof Slab of percentage on fi...
AS per recommendations of technical working group rates for form work shall be added on percentge basis to the finished concrete item rate as per table- Addendum I SI NO15 Roof Slab of percentage on f...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side c...
Providing and fixing in position fully panelled Honne wood shutters for doors with , stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing...
Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...
Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...
Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials,...
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete ---- with all lead and lift and loading and unloading charges cost and conveyance of all...
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc...
Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, l...
Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms ---- with all lead and lift and loading and unloading charges cost and conv...
Providing and fixing chromium plated brass curtain rod with ISI mark having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...
Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...
Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...
Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corner...
Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corner...
Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corner...
Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corner...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Providing and laying Polished Glazed Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming t...
Providing and laying Polished Glazed Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming t...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...
Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti...
Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti...
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), includi...
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), includi...
Providing and laying Polished Sadarahalli Grey Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural d...
Providing and laying Polished Sadarahalli Grey Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural d...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...
Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :New work (two coats) including a coat of approved steel primer but exclud...
Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give...
Providing and Applying CFTRI approved two component flexible polymer modified acrylic cementitious waterproofing coating with a mix ratio of (5 Liquid :7 Powder) to the RCC surface like Roof, bathroom...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of ...
Providing and fixing polyurethane foam (PUF) slab 70mm thick average with PU slab density 36+/-2 kg/m insulation for over deck covered with two layers of 40mm thick cement concrete screed with mix pro...
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 g/m2 (bot...
Electrical Concealed Conduit System Supplying heavy PVC condiuit pipe ……mm dia ......mm thick confirming to IS 2509 woth suitable size bends, metal/PVC junction boxes adhesive paste etc., and ru...
25mm dia 2mm thick ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., c...
32mm dia 2.5mm thick ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc.,...
Grove Cutting Extra for Groove cutting in brick wall/CC floor to the suitable depthfor concealing of Conduit/GI pipe and plastering, finishing upto
wall surface complete.upto 50mm conduit in brick ...
Supplyingandflushmountingpowdercoated/galvanizedmetalboxsuitableformountingmodularswitchplates.Theboxshouldbefirmlyflush mounted after due groove cutting in Brick/Stone/C.C wall:1-2way ---- with all l...
1-3way ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as p...
4-5way ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as p...
6way ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per...
8way ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per...
10-12way ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as...
16 way ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as p...
18 way ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as p...
supplying and fixing metal fan box with round hook ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all ...
Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete12"x12"x3"(300x30...
12x9"x3"(300x228x76 mm) ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges et...
10x7"x3"(254x178x76 mm) ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges et...
8x6"x3"(203x152x76 mm) ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc...
4x4"x3"(101x101x76 mm) ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc...
1 to 2 way ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete ...
3 to 4 way ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete ...
Supplying and fixing PVC/metal conduit accessories deep junction box ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of ...
19/20mm junction box ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc.,...
25mm junction box ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., co...
MCB Distribution boards Supplying and fixing regular MCB Distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts with provision for fixing suitable type capacity M...
12Way SP & N ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complet...
16Way SP & N ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complet...
II DOUBLE DOOR 8Way SP & N ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges...
III DOUBLE DOR 4Way TP & N ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges...
6Way TP & N ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete...
16Way TP & N ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complet...
plumbing Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe...
20 mm nominal dia pipes ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges et...
25 mm nominal dia pipes ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges et...
32 mm nominal dia pipes ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges et...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and Filling in foundation with granite / trap broken metal 100mm. and down size, with approved sand including hand packing, ramming, watering, including cost of all materials and labour with...
Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) u...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) inc...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (...
Providing and fixing sand cast iron soil waste and vent pipes 100mm dia with spun yarn soaked in cement slurry and cement mortar 1:2 including cost of materials, labour, testing complete as per specif...
Sum Tank Filling available excavated earth (excluded rock)in side of founation upto plinth in layers not exceeding 20cms In depth compacting each deposited layers by ramming after watering with lead u...
AS per recommendations of technical working group rates for form work shall be added on percentge basis to the finished concrete item rate as per table- Addendum I SI NO11 Earth Retaing Strutures perc...
AS per recommendations of technical working group rates for form work shall be added on percentge basis to the finished concrete item rate as per table- Addendum I SI NO.15 RCC rcc roof slab percenta...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (...
Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, in...
Providing and laying water proofing treatment to the Water tanks & Liquid Retaining structures with two component acrylic polymer modified cementitious waterproofing membrane with minimum elongation o...
Providing cast iron footrest and fixing in manhole with M 10 cement concrete block of 20x20x10cms, using 20mm and down size metal of size including cost of materials, labour charges, curing complete a...
Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including t...
Providing and fixing gun metal non- return valve of approved quality (screwed end) 50 mm nominal bore13.6.4.1 Horizontal, ---- with all lead and lift and loading and unloading charges cost and convey...
Providing, supplying to work site,Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications,with testing of as per instructions of engin...
boreewll Geophysical investigation at site for sinking borewells for Providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electricalsounding by adopting...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...
Borewell depth of 50 to 100 m ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental char...
Borewell depth of 100 to 150 m ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental cha...
Borewell depth of 150 to 200 m ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental cha...
Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...
Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak p...
Providing, fabricating and fixing at site various diameter MS MJ ends with dummy plates (END CAPS) to suit CI / DI spigots end as per the sketch. The cost is inclusive of all materials, i.e, rubber '...
Providing and fixing DI MJ specials such as branches and bends suitable for DI K7 and K9 pipes and CI LA class pipes, as per IS 13382 with latest amendments with complete accessories and fixing at si...
Providing, supplying to work site,Single Phase Submersible Pump Setsof 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000specifications,with testing of as per instructions of ngineer...
Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. ---- wi...
Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog ...
Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveyingto work site including loading and unloading at both destinations and r...
Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments ---- with all lead and lift and loading and unloading charges cost and c...
Supply and delivery at site of brand new best make non-return valve as\per IS 778/1984 with ISI Mark and as per its latest amendments ---- with all lead and lift and loading and unloading charges cost...
Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...
Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour, tools and equipments including providing cement concrete foundation bed etc., com...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
kw-IV-Veranjenayya Temple.docx
Tender Document • 1.89 MB
Govt and DC Order.pdf
Others - Govt and DC Order Copy • 2.96 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .