M/o Completed scheme of Nazul A/c-II under Hort. Zone

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.

Disposal of building rubbish, malba, construction and demolition (C&D) waste, and other similar unserviceable, dismantled, or waste materials by mechanical transport, including collection and gathering of waste, loading, transportation, and unloading at the nearest approved MCD dumping ground or authorized C&D waste processing plant, including all lifts and lead, complete in all respects, as per the directions of the Engineer in Charge. Note: 1. The agency or contractor shall submit copies of payment details along with challans or receipts issued by MCD authorized dumping grounds or approved C&D waste processing plants. These charges shall be reimbursed separately through Hand Receipt (HR) after due verification by the department. 2. Payment for this item, including charges of MCD authorized dumping grounds or approved C&D waste processing plants, shall be released only after verification of the genuineness of the submitted challans or receipts.

Providing and fixing factory made precast RCC perforated drain covers with frame , of size 600*600 mm on the existing chambers, all as per direction of Engineer-in-charge.

Hiring of Hydraulic Excavator (3D) with driver and fuel for excavation and leveling of local earth in DDA parks/waterbody complete as per the direction and satisfaction of Engineer-in-charge

Excavating holes upto 0.10 cum, including getting out the excavated soil, then returning the soil as deported in layers not exceeding 20 cm in depth, including consolidating and deposited layer by ramming watering etc., disposing of surplus excavated soil as directed with in a lead of 50 mm and lift upto 1.5 m. All kind of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level a) 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources )

Centering and shuttering including strutting, propping etc. and removalof form work for :Foundations, footings, bases for columns

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Manufacturing, supplying and fixing retro reflective small signage boards made up of 4 mm thick ACP sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-incharge.(Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). a) Small signage board.

Providing Unskilled labour for cleaning and maintenance works under Jal Sanchay Abhiyan, inclluding cleaning of chambers, drains, catch pits, inlets and outlets, removal of weeds, shrubs, garbage, silt and other deposited materials, minor digging, and disposal of excavated/surplus material within the specified lead, complete in all respects as directed by Engineer-in-charge. The rate shall include cost of all labour, tools & plants (T&P), safety equipment, loading, unloading, transportation, incidentals and all operations required for satisfactory completion of the work as per direction of Engineer-in-charge.