katraj parlal kr 3 te Savant vihaer phase 3 12 m D P rastyakadhil Bhintivaril Murals ubharne v tadnushigik kame karne (B 2 padhatine) Manpa rajistrshan at shitil

Amount

Laying and Jointing PVC Pipe. Heading

SPECIFICATIONS Technical Specifications for Chemical Stone wall murals. Providing and fixing chemical stone murals or Human Figures of various events . Mural should be in 6 mm to 8 mm thickness.Projection of the mural as per requirement of aesthetic appeal. sculpture should have full likeness of the event in consideration and to be painted with Non combustible Dico paint or Artistic Acrylic Colour. Also mural must be in One tone colour including, concept, art work, moulding, mural copy, silicon rubber/FRP/P.O.P moulding, transport, installation at site, material, casting labour, clay work, PoP labour and metal labour,Scaffolding,structural steel as per site requirement,etc complete as per the instruction by PMC Engineer.Clay models - Clay models, as prepared in stipulated size and postures, are to be got approved by the PMC Engineer. Rectifications and alterations as per suggestions given at the time of inspection, are to be done without any extra cost.Anatomy - Human bodies shall display perfect proportion in anatomy eg.the wrinkles and cleavages, and realistic simulation of hair, dresses etc.Making of Moulds -- After approval of the clay models, Silicon,/PoP / FRP moulds are to be taken for final casting. The moulds have to be approved by the PMC.Final casting -- From Silicon,/PoP / FRP moulds, final chemical stone castings (6 to 8 mm thick) are to be done after obtaining approval of the PMC on moulds.The materials used for Chemical stone castings shall be as per following Specification 1st coat of layer made from epoxy compulsary and it should be 1mm thick Fiber glass Chopped stand matt - 450 GSM,use of Polythickso Tropic Resin is compulsory as per requirement .Fibre glass woven roving - 610 gm density use after first coat.Use of Fiber glass Chopped stand matt - 450 GSM,use of Polythickso Tropic Resin for second coat is compulsory as per requirement .General purpose (G.P.) polyester resin or High Grade Epoxy Stone powder / sand All castings are to be in One tone Colour with natural texture and depths including Primer Putty.Acid Wash Compulsory After finalization of work .The colour used shall be such that all specimens should be washable.Structural Steel should be used as per requirement for chemical stone mural mould on site including welding .Scratch proof P.U coating consist of ultraviolet preventive colours in mat finish is compulsory.Transportation ,loading , unloading ,scaffolding, fitting at any height, whole job work including labour cost. Details १. या व्यतिरिक्त सदर काम पुर्ण करण्याच्या दृष्टिने आवश्यक लागणा-या सर्व कामांचा / माध्यमाचा समावेश यामध्येच असणार आहे.२. सदर कामाचा दर देताना जीएसटी दराचा समावेश करणेत यावा. Area -651 sqft (approximately) (amount to be paid forl contractor)

SPECIFICATIONS Technical Specifications for Chemical Stone wall murals. Providing and fixing chemical stone murals or Human Figures of various events . Mural should be in 6 mm to 8 mm thickness.Projection of the mural as per requirement of aesthetic appeal. sculpture should have full likeness of the event in consideration and to be painted with Non combustible Dico paint or Artistic Acrylic Colour. Also mural must be in One tone colour including, concept, art work, moulding, mural copy, silicon rubber/FRP/P.O.P moulding, transport, installation at site, material, casting labour, clay work, PoP labour and metal labour,Scaffolding,structural steel as per site requirement,etc complete as per the instruction by PMC Engineer.Clay models - Clay models, as prepared in stipulated size and postures, are to be got approved by the PMC Engineer. Rectifications and alterations as per suggestions given at the time of inspection, are to be done without any extra cost.Anatomy - Human bodies shall display perfect proportion in anatomy eg.the wrinkles and cleavages, and realistic simulation of hair, dresses etc.Making of Moulds -- After approval of the clay models, Silicon,/PoP / FRP moulds are to be taken for final casting. The moulds have to be approved by the PMC.Final casting -- From Silicon,/PoP / FRP moulds, final chemical stone castings (6 to 8 mm thick) are to be done after obtaining approval of the PMC on moulds.The materials used for Chemical stone castings shall be as per following Specification 1st coat of layer made from epoxy compulsary and it should be 1mm thick Fiber glass Chopped stand matt - 450 GSM,use of Polythickso Tropic Resin is compulsory as per requirement .Fibre glass woven roving - 610 gm density use after first coat.Use of Fiber glass Chopped stand matt - 450 GSM,use of Polythickso Tropic Resin for second coat is compulsory as per requirement .General purpose (G.P.) polyester resin or High Grade Epoxy Stone powder / sand All castings are to be in One tone Colour with natural texture and depths including Primer Putty.Acid Wash Compulsory After finalization of work .The colour used shall be such that all specimens should be washable.Structural Steel should be used as per requirement for chemical stone mural mould on site including welding .Scratch proof P.U coating consist of ultraviolet preventive colours in mat finish is compulsory.Transportation ,loading , unloading ,scaffolding, fitting at any height, whole job work including labour cost. Details १. या व्यतिरिक्त सदर काम पुर्ण करण्याच्या दृष्टिने आवश्यक लागणा-या सर्व कामांचा / माध्यमाचा समावेश यामध्येच असणार आहे.२. सदर कामाचा दर देताना जीएसटी दराचा समावेश करणेत यावा. Area -651 sqft (approximately) (amount to be paid forl contractor) (amount to be paid to pune municipal corporation from contractor)

D S ENTERPRISES

Sagar Tanaji Bhosale