Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.0 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹46.8 L+₹4.4 L (10.4%)Rejected-Finance | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹48.0 L+₹5.6 L (13.3%)Rejected-Finance | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹49.1 L+₹6.7 L (15.8%)Rejected-Finance CHALIHA GAON PO CHALIHA DISTT JORHAT ASSAM PIN 785004 | JORHAT | ASSAM | 785004 | L4 | Rejected-Finance Other than L1 | |
| 5 | L5₹49.5 L+₹7.1 L (16.9%)Rejected-Finance | L5 | Rejected-Finance Other than L1 |
Tender Value
Refer Docs
EMD Value
₹80,000
Closing Date
12 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) JORHAT
JORHAT
CERTAIN B/R AND E/M REPAIR TO LIVING ACCN AT ALG VIJAYNAGAR UNDER GE (AF) JORHAT
2023_MES_634046_1
8575/E8
Open Tender
Civil Works
Item Rate
180 days
GE (AF) JORHAT
AS PER NIT
9 documents required · 9 mandatory
₹500
GE (AF) JORHAT
₹80,000
Yes
13 Feb 2024
22 Dec 2023
15 Jan 2024
22 Dec 2023
12 Jan 2024
6 Jan 2024
Amount
Taking down chowkats or frame not exc 1.5 sqm each with shutter (without taking off shutter from frame) and removing from site complete all as specified and as directed.
Taking down shutter n. exc. 1.0 sqm each and remooving from site complete all as specified and as directed.
Taking down chowkats or frame exc 1.5 sqm each but n exc.4 sqm each with shutter (with out taking off shutter from frame) and remooving from site complete all as specified and as directed.
Taking down shutter exc. 1.0 sqm but n. exc. 2.0 sqm each and remooving from site complete all as specified and as directed.
M&L for 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.
S&F 35mm thick 2nd class hardwood plain framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or veneered particle board medium density, wood particle board with commercial face veneers: and fitted to chowkhats complete all as specified and as directed.
S&F 30mm thick 2nd class hardwood glazed and skeleton window shutter, open rebated and prepared to received glass, gauge, etc. with sash bars, edge of framing plain chamfered or round, fitted with cut and mitred bends for securing glass, gauge, etc. but devided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers provided with styles and rails, etc. size of member of shutters as specified in SSR Part-I Sec-8, clause 8.24 (b) fitted to chowkats complete all as specified and as directed.
S&F 30mm thick glazed skeleton shutter, 30mm thick 2nd class hardwood divided into square with plain chamfered or round mitred and rebated sash bars, any numbers prepared to receiveglass, wire mesh gauge, etc. edges of framing plain or rounded fitted with cut and mitred beads for securing glass etc. complete all as specified and as directed
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed.
S&F factory made solid panel PVC door shutter 30mm thick consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and as directed.
S&F 75mm butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.
All as per Serial item No. 11 here-in-before but of size 100mm
S&F 150mm long extruded aluminium alloy handles, fabricated type anodised complete all as specified and as directed.
S&F 150mm long aluminium anodised tower bolt of extruded section complete all as specified and as directed.
S&F 125mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.
S&F 125mm long aluminium anodised tower bolt of extruded section complete all as specified and as directed.
S&F 300mm long aluminium anodised sliding bolt of extruded section complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
S&F framed work such as grills, gratings, etc. with end of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, staging, etc. and similar work conforming to Fe 290, Gde-E-165 complete all as specified and as directed.
M&L preparation of new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed
M&L for cleaning and removing all scale and dirt, etc., from overhead/underground PVC/RCC tank of capacity exc. 250 litres but not exc. 500 litres each and from mouths of circulating pipes, etc, complete all as per specified and as directed.
All as per Serial item No 21 here-in-before but exc. 500 litres and not exc. 1000 litres capacity.
Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all as specified and as directed
M&L for 75mm thick cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) as in floors,etc. complete all as specified and as directed.
M&L for 75mm thick cement concrete (1:2:4) type B-2 (using 40mm graded stone aggregate) as in floors, etc. complete all as specified and as directed.
M&L for 100mm thick cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in floors, subbase, hard standing, etc. complete all as specified and as directed.
M&L hardcore of broken bricks gauge n exc. 63mm, deposited, spread and levelled in layers n. exc. 15cm thick, watered and rammed to a true surface complete all as specified and as directed.
M&L sand filling under floors or in foundation including watering and consolidation complete all as specified and as directed.
Dismantling timber scantlings, 40 Sq.cm and over in section, in any position, in framed work complete all as specified and as directed.
Dismantling timber fillets, rails, posts, rafters, purlings, etc, under 40 Sq.cm in Section; in any position, as in framed work complete all as specified and as directed.
M&L for 2nd class hardwood in timber scantling, wrought timber, fixed as in framed and fixed in any position complete all as specified and as directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/blankets/slabs, any description and any thickness including cover fillets, cornices, etc. complete all as specified and as directed.
M&L for 6mm thick plywood grade BWR, type BB fixed to timber frame work with screws complete all as specified and as directed.
M&L for 2nd class hard wood plain fillets. square, rectrangular or triangular in section, of sectional area exc. 3 & n. exc. 6 sq.cm, clean sawn, secured with nails or brads complete all as specified and as directed.
Dismantling boarding of any description and fixed in any position with nails/screws complete all as specified and as directed.
M&L for 40 mm thick, 2nd class hardwood boarding, plained one side & with butt joints and fixed with nails as in floor complete all as specified and as directed.
M&L for 25mm thick 2nd class hardwood boarding, as in weather boarding, clean sawn of thickness 20mm to 25mm and rebated on thick edge to give 20mm laps and fixed plained one side with butt joints in floor and skirting and fixed with nails and fixed complete all as specified and as directed.
M&L for preparation of wood and wood based materials, old surfaces of any description and girth not otherwise described and treated with two coats of raw linseed oil complete all as specified and as directed
M&L preparing new wooden surface of any description over 10cm width or girth and applying one coats of of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for preparation of old painted wooden surfaces of any description, over 10cm width or girth and applying two coats synthetic enamel paint (First quality) complete all as specified and as directed.
M&L for preparation of old painted steel surfaces of any description, over 10cm width or girth and applying two coats synthetic enamel paint (First quality) complete all as specified and as directed.
S&F as in repairs 15mm bib tap, chromium plated, fancy type, cast copper alloy screwed down for iron pipe or for brass ferrule complete all as specified and as directed.
S&F as in repairs stop valves, 15mm dia chromium plated, fancy tpye, cast copper alloy, screwed down, high pressure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
S&F as in repairs brass chromium plated tubular towel rail, 20mm dia, D type 60cm long between flanges complete all as specified and as directed.
S&F as in repairs curtain rails of mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and as directed.
S&F as in repairs wash basin vitreous china, flat back of size 550x400mm complete all as specified and as directed.
S&F 15mm dia pillar tap, fancy type, cast coppert alloy with capstan heads, chroumium plated, screwed down, high pressure with or without lettered 'Hot" or "Cold" with long screwed shanks and flynuts screwd for union pipe 15mm complete all as specified and as directed.
S&F PVC waste pipe 32mm dia suitable length for wash basin complete all as specified and as directed.
S&F CP/PVC connection pipe of 15mm dia, 450mm long complete all as specified and as directed.
S&F as in repairs Vitreous china squatting pan, "Orrisa Pattern" of size 580x440mm, white with integral foot rests (except flushing cistern and flush pipe) complete all as specified and as directed.
S&F as in repairs 10 litres capacity PVC valveless syphonic action type flushing cistern, low level, coloured with inlet ball, float and handle including brackets complete all as specified and as directed.
S&F sinks as in repairs with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe of overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.
PVC down pipe for kitchen sink as per site required complete all as specified and as directed.
Taking up or down 15mm dia steel tubing and connection, including cleaning, for refixing or removal complete all as specified and as directed.
All as per Serial item No. 55 here-in-before but 20mm dia steel tubing.
S&F 15mm dia GI pipes, medium grade, with all fittings, concealed type, fixed to walls and ceiling or laid in floors complete all as specified and as directed.
All as per Serial item No. 57 here-in-before but 20mm dia GI pipe.
Excavation in trenches, n. exc. 1.5m wide and n. exc. 1.5m in depth for foundation, or shafts, wells, cesspits, manholes pier holes etc. n. exc. 10 Sqm on plan area and n. exc. 1.5m in depth and getting out in soft/loose soil complete all as specified and as directed.
M&L for returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25cm complete all as specified and as directed.
Removing excavated materials n. exc. 50m and depositing where directed at a level n. exc. 1.5m above the starting point as in soft/loose soil complete all as specified and as directed.
Taking downn eaves gutters and rain water pipes(any size or pattern) including all fittings, heads, shoes, bends, swan necks, etc. complete all as specified and as directed.
S&F as in repairs PVC (SWR) half round gutters drain pipe of size 180mm bore complete all as specified and as directed.
S&F 180mm bore PVC (SWR) joint tee with end cap as in gutters, drain pipe, etc. complete all as specified and as directed.
S&F 180mm bore PVC (SWR) pipe clamps as in gutters, drain pipe complete all as specified and as directed.
S&F as in repairs 75mm dia PVC (SWR) pipes, single sockets, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.
S&F as in repairs 110mm dia PVC (SWR) pipes, single sockets, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.
S&F as in repairs 75mm dia PVC (SWR) bends, any radius complete all as specified and as directed.
All as per Serial item No. 68 here-in-before but 110mm dia PVC (SWR) bends.
S&F as in repairs PVC (SWR) branch piece of size 75mm bore, single (Single T) equal or unequal fixed to existing pipe complete all as specified and as directed.
All as per Serial item No. 70 here-in-before but 110mm bore, branch piece.
Demolition of brick work or stone/boulder/PCC block, built in cement mortar or cement lime mortar complete all as specified and as directed.
M&L for pre-cast cement concrete block masonry with solid blocks, exc. 10cm in width of PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) and setting in cement mortar (1:6) complete all as specified and as directed.
M&L for rendering 10mm thick on brick masonary surface or surface other than fair face of brickwork in cement mortar (1:4) mixed with WPC by weight of cement as per manufacturer's instructions, finshed even and smooth without using extra cement complete all as specified and as directed. Note : WPC shall be measured and paid separately.
M&L for rendering 10mm thick on brick masonary surface or surface other than fair face of brickwork in cement mortar (1:6), finshed even and smooth without using extra cement complete all as specified and as directed.
Supply only WPC (best quality) of approved make complete all as specified and as directed.
M&L preparation of new plastered surface of walls and applying three coats of white wash complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the permises complete all as specified and as directed.
M&L for 15mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor finishes complete all as specified and as directed.
M&L for providing non skid ceramic coloured tiles of 7 to 8mm thick, area of each tile exc. 0.11 sqm but not exc. 0.18 Sqm as in floors, set and joint in cement slurry, jointed & pointed in white or coloured cement to match the surfaces of the tile complete all as specified and as directed.
M&L for rendering 10mm thick on brick masonary surface or surface other than fair face of brickwork in cement mortar (1:3) complete all as specified and as directed.
M&L for providing glazed ceramic coloured tiles of size 350x250x7mm/ 350x250x7mm thick as in vetical surfaces such as dado, skirting, etc., set in neat cement slurry, jointed & pointed in white or coloured cement to match the surfaces of tile complete all as specified and as directed.
Hacking out old broken glass of any thickness, size, quality or description from wooden frame, concrete or brick surroundings glazes with putty with beads complete all as specified and as directed.
M&L 3mm thick sheet glass, ordinary quality and glazing with oil putty or beadings in square not exc. 0.5 sqm in each pane complete all as specified and as directed.
M&L 2nd class hardwood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads exc. 3 sqcm and n. exc. 6 sqcm complete all as specified and as directed.
M&L cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) as in surface channel and drain including necessary form work complete all as specified and as directed.
M&L for form work to side of concrete foundation, rough finished surfaces concrete flat surfaces complete all as specified and as directed.
M&L for extra forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement complete all as specified and as directed.
Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.
Formwork to soffits such as lintel, cantilievers, shelves including supports, overhangs etc.complete all as specified and as directed.
M&L for mild steel TMT bars, 10mm dia and over, cut to length, bent to shape required including cracking, bending, spirally for hooping for column, hooking end and binding with including miled steel wire annealed not less than 0.9mm dia or securing clips complete all as specified and as directed.
M&L for mild steel TMT bars, 8mm dia cut to length, bent to shape required including cracking. bending, spirally for hooping for column, hooking end and binding with including mild steel wire annealed not less than 0.9mm dia or securing clips complete all as specified and as directed.
M&L for RCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelvescomplete all as specified and as directed.
M&L for granite (of any type) tiles, 20mm thick, machine cut, bedded and jointed withgrey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed.
Dismantling of plain or corrugated steel sheeting of any gauge or similar pattern roof coverings complete all as specified and as directed.
M&L for Pre-painted galvatume aluminum zinc coating Gl based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws, etc. complete all as specified and as directed.
All as per Serial item No. 96 here-in-before but of plain steel sheet.
M&L for 0.63mm thick plain, galvanised, mild steel sheeting in ridges, hips, vally gutters, drip and straight flashing complete all as specified and as directed.
S&F stainless steel wire cloth 0.36mm nominal dia or wire and average width of aperture 1.4mm and fixrd with tinned tacks of mild steel wire stapes, etc. complete all as specified and as directed.
S&F PVC mat of 0.35mm thick as in floor, approved texture/colour, fixed/pasted with adhesive complete all as specified and as directed.
Taking down carefully aluminium point wiring (light, fans, socket etc) complete incl battens and fittings such as switch, celling rose, light fittings, regulators, socket etc and making good disturbed surface of wall/floor etc. complete all as specified and as directed.
M&L for point wiring with 1.5 sq.mm FR grade PVC insulated and unsheathed stranded copper conductor cable, 1100 volts grade as per IS-694, drawn through and including PVC casing and capping (not less than 20mm wide) complete with all fittings and acessories including PVC board for mounting of switches, sockets, regulators, etc and 1.5 sq.mm stranded copper conductor cable, FR grade PVC insulated and unsheathed for earth continuity complete all as specified and directed for One Light Point controlled by one, one way switch complete all as specified and as directed.
All as per Serial item No. 102 here-in-before but for One Ceiling/Exhaust Fan.
All as per Serial item No. 102 here-in-before but for 5 amps socket point on independent board.
All as per Serial item No. 102 here-in-before but with 2.5 sq.mm cable for 15 amps socket outlet on independent board with 2.5 Sq.mm earth continuty wire.
S&F ceiling rose, surface backelite, three terminals PVC/polycarbonate, insulated body complete all as specified and as directed.
S&F as in repairs switch piano, flush type, 6 Amps 240 volts single pole, one way complete all as specified and as directed.
S&F as in repairs socket outlet, 5 pin 6 Amps, flush type complete all as specified and as directed.
S&F as in repairs socket outlet 15/16 Amps, 6 in 1, flush type complete all as specified and as directed.
S&F as in repairs switch piano, flush type, 15/16 Amps 240 volts single pole, one way complete all as specified and as directed.
S&F as in repairs fan regulator, electronic type, rotary step, Socket type 240 volt complete all as specified and as directed.
S&F as in repairs switch socket combination 2 in 1, 3 pin, 5 and 15 Amps, flush type universal with box complete all as specified and as directed.
S&F as in repairs switch socket combination 2 in 1, 5 Amps, flush type with box complete all as specified and as directed.
S&F as in repairs 20 watts intregated LED tube light fittings, 4 feet. long suitable for single phase 230 volts, 50 Hz AC supply and mounted on wall or ceiling. complete with all accessories internally prewired and including electrically connection with copper conductor cable of size 0.5 Sq.mm (nominal area) complete all as specified and as directed.
S&F as in repairs surface mounting LED 2feet x 2feet luminaire of capacity 36 watts with white powder coated CRCA housing with LEDs and full window acrylic diffuser, etc.complete with all acessories internally prewired suitable for sigle phase 230volts 50Hz AC supply including connecting up with flexible copper conductor cable of size 0.5 Sq.mm (nominal area) complete all as specified and as directed.
M&L for sub main wiring including taking down old existing one comprising single core, 2 runs of 6 sq.mm nominal cross sectional area, FRLS multistranded copper conductor cable, PVC insulated-unsheathed 1100 volts grade drawing in and including appropriate dia. in PVC casing capping/conduit and its fittings complete surface/concealed including provision of 1x4 sq,mm nominal cross sectional area multistranded copper conductor cable, PVC insulated unsheathed 1100 volts grade as earth wire complete all as specified and as directed. Note:-1. Extra length of cables/ wire required for connection to MCBs/DB's shall not be measured and the rate quoted by contractor for per unit shall be deemed accordingly 2. Cuttings/chasing of walls, etc. and making good to the disturbed surface shall be measured and paid separately)
All as per Serial item No.116 here-in-before but of two single core 2.5 Sq.mm for phase & neutral and 01 single core 1.5 Sq.mm for earth wire.
Taking down MCB DB/main switch of any size and making good to disturbed surfaces of wall/floor complete all as specified and as directed.
S&F as in repairs sheet metal enclosures, SP&N DBs, double door, 240 volt, 8 way complete all as specified and as directed.
S&F as in repair sheet metal enclosures, SP&N DBs, double door, 240volt 4 way complete all as specified and as directed.
S&F as in repairs sheet metal enclosures, TP&N DBs, double door, 240 volt, 4 way complete all as specified and as directed.
S&F as in repairs 415 volt, 10 KA 'C' curve miniature circuit breaker (MCB) of TPN, 40 to 100 Amps and current carrying capacity in the DB complete with connection testing and commissioning all as specified and as directed.
S&F as in repairs for MCB, single pole, 240 volts, 6-32 Amps, 10 KA, 'C' curve complete all as specified and as directed.
S&F as in repairs for MCB, single pole & neutral, 240 volts 32 Amps, 'C' curve complete all as specified and as directed.
S&F as in repairs for MCB single pole & neutral, 240 volts, 40 to 63 Amps, 'C' Curve complete all as specified and as directed.
S&F as in repairs for building security light 35 watt LED light fitting, new generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP-65 roadway luminaire with high power LEDs as light source & exclusively designed polycarbonate cover alongwith electronic driver, complete after taking down old unserviceable light fitting all as directed.
S&F as in repairs Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings complete all as specified and as directed.
S&F 12W LED bulb B-22 type, CDL/WW complete all as specified and as directed.
M&L for earthing with galvanised steel earth plate electrode of size 600x600x6mm thick, burried directly in ground vertically to a depth of not less than 2.25m below ground level connected to Gl wire 4mm dia as earthing lead means of nut, bolts and washers made out of galvanised iron mild steel and 32mm dia Gl pipe "light grade" for protection of earth lead and connected to test point or as directed including PCC Pit in cemen concrete (1:3:6) type C-1 (using 20mm graded stone aggregate) and RCC Cover of size 450x450x50mm in RCC (1:2:4) type B-1 (using 20mm graded stone aggregate), reinforced with and including 8.0mm dia TMT bars @ 100mm centre to centre both ways, GI wire Mesh, Funnel, Galvanised Iron Watering Pipe 20mm bore (dia), medium grade, including necessary excavation in soft/loose soil, and returning, filling in and removal of surplus soil upto a distance of 50m and all as shown in Electrical Plate No. 5 of MES Schedule Part-I and testing on completion including taking down old existing unserviceable earthing complete all as specified and as directed NOTE : The contract sum shall be derieved by deducting the amount shown in Schedule of Credit attached to this tender from total amount of Schedule 'A'/BOQ.
Chief Builders &Consultants
M/S SANTOSHI TRADERS
M/S RAJIB GOSWAMI ENTERPRISE
M/S PAUL CONSTRUCTION
THE SUPPLY AGENCY
SHRI RAJEN PASWAN
M/S BARUAH ELECTRICALS
Bidder Name
NIHAR ENTERPRISE
THE SUPPLY AGENCY
SHRI RAJEN PASWAN
M/S PAUL CONSTRUCTION
M/S SANTOSHI TRADERS
Chief Builders &Consultants
M/S BARUAH ELECTRICALS
M/S RAJIB GOSWAMI ENTERPRISE
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .