CONVERSION OF OLD VINTAGE ALUMINUM WIRING AND CONNECTED WORKS ELECT OTHER INFRA OF CC 156 MAIN BLDG AT HC SC JC WING AWC MHOW

Amount

SCHEDULE "A" :

Item No. 01 :- Taking down existing old Extg unserviceable LT UG/ service cable of any description and size complete all as specified and directed.

Item No. 02 :-Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for laying of cable etc. n exc 1.5 m in depth and getting out in soft/loose soil all as specified and directed.

Item No. 03:- Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Item No. 04 :- Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point all as specified and directed at site.

Item No. 05 :- Supplying and laying un-reinforced precast concrete cable cover, Class LV, Type I, flat, size 250 mm x 150mm x 40mm complete all as specified and directed.

Item No. 06 :- Supply and laying fine sand for cable protection in layers incl punning all as specified and directed.

Item No. 07 :- M&L for Tubes, 'medium' grade,galvanised, with all fitting of size 50 mm ;laid in trenches for cable protection all as specified and directed

Item No. 08 :- M&L for Tubes, 'medium' grade,galvanised, with all fitting of size 80 mm laid in trenches for cable protection all as specified and directed

Item No. 09 :- M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 95 sqmm 3.5 core laid in trenches, fixed on walls, ceiling and on cabe trays incl connecting to LT panels with proper cable glands all as specified and directed.( LT panel to wall mounted panels)

Item No. 10 :- M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 120 sqmm 3.5 core laid in trences, fixed on walls, ceiling and on cable trays all as specified and directed.( Main LT panel to out door panels )

Item No. 11 :- M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 185 sqmm 3.5 core laid in trences, fixed on walls, ceiling and on cable trays all as specified and directed.( Addl cable required for shifting of Main LT panels 10 RM x 4 run)

Item No. 12 :- Supply ,fabrication, installation and testing of LT Panel out door type factory made CPRI Approved, water and vermin proof protection of min size 1500 mm x 1500 mm x 600 mm (over all dimension) made out of 3.00 mm thick CRCA sheet dully supported with mild steel angle iron for vertical frame and legs with mild steel flat iron in horizontal sides of the frame with front and back side openable ,single hinged door / shutter with locking arrengement and powder coated finish both internal and external steel surfaces after necessary preparation of steel surfaces including providing PCC (1:3:6) type C2 foundation of suitable size and connections of all outgoing / incomming cable inclusive of necessary excavation and earthwork as required including the following fitment accessories and also including removing old exisisting one complete all as specified and as directed. .(for AC Loads) NOTE:- Rate of earthwork and PCC work are deemed to be inclusive in this item. Make of MCCB/MCB : L&T/ ABB/Schneider

OUTGOING:- (a) 4 pole MCCB 160 Amps with rotary handle, adjustable thermal magnetic release type 415 Volts, Ics = 100% Icu, breaking capacity 35 KA including all fixing accessories with both ends spreader links - 02 Nos.

(b) 4 pole MCCB 100 Amps with rotary handle, adjustable thermal magnetic release type 415 Volts, Ics = 100% Icu, breaking capacity 25 KA including all fixing accessories with both ends spreader links - 04 Nos. (c) 4 pole MCCB 63 Amps with rotary handle, adjustable thermal magnetic release type 415 Volts, Ics = 100% Icu, breaking capacity 25 KA including all fixing accessories with both ends spreader links - 03 Nos. (d) Enamelled iron danger notice plate of 1.60 mm thick mild steel sheet of size 200 mm x 150 mm , white with letters , figures and conventional skull and bones in signal red and fixed with nuts and bolts on door / shutter - 03 Nos. (e) Provn of spare outgoing MCCB - 02 Nos Make of Panel : Power control system Indore/RR Engineering Indore/L&T

Item No. 13 :- M&L for shifing of LT feeder pillar box carefully and re install in new location by removing all incomming and ougoing connections, segregation of all out going connections and if necessary make the circuit functional in in office hours , removing XLPE cable from ducts, under floor with necessary earth work and excavation, extension/ relaying of XLPE cable any size incl LT cable joining kit cold shrinkable type connction of cables to relocated LT panels with proper cable glands, end termination, lugs, nut bolt ans washers complete including providing PCC (1:3:6) type C2 foundation of suitable size all as specified and directed. NOTE:- Rate of earthwork and PCC work are deemed to be inclusive in this item.

Item No 14 :- Supply ,fabrication, installation and testing of LT Panel out door type factory made CPRI Approved, water and vermin proof protection of min size 2500 mm x 1500 mm x 600 mm (over all dimension) made out of 3.00 mm thick CRCA sheet dully supported with mild steel angle iron for vertical frame and legs with mild steel flat iron in horizontal sides of the frame with front and back side openable ,single hinged door / shutter with locking arrengement and powder coated finish both internal and external steel surfaces after necessary preparation of steel surfaces including providing PCC (1:3:6) type C2 foundation of suitable size and connections of all outgoing / incomming cable inclusive of necessary excavation and earthwork as required including the following fitment accessories and also including removing old exisisting one complete all as specified and as directed. .NOTE:- Rate of earthwork and PCC work are deemed to be inclusive in this item.

OUT GOING NO 1:- (a) 4 pole MCCB 250 Amps with rotary handle, adjustable thermal magnetic release type 415 Volts, Ics = 100% Icu, breaking capacity 35 KA including all fixing accessories with both ends spreader links - 01 No. (LT Panel No 1) (b) 4 pole MCCB 160 Amps with rotary handle, adjustable thermal magnetic release type 415 Volts, Ics = 100% Icu, breaking capacity 35 KA including all fixing accessories with both ends spreader links - 04 Nos. (wall mounted panel)

(c) 4 pole MCCB 100 Amps with rotary handle, adjustable thermal magnetic release type 415 Volts, Ics = 100% Icu, breaking capacity 25 KA including all fixing accessories with both ends spreader links - 01 No. (d) 4 pole MCCB 63 Amps with rotary handle, adjustable thermal magnetic release type 415 Volts, Ics = 100% Icu, breaking capacity 25 KA including all fixing accessories with both ends spreader links - 02 Nos. (spare) (e) Provn of spare outgoing MCCB - 02 Nos

OUTGOING NO 2 :- (a) 4 pole MCCB 160 Amps with rotary handle, adjustable thermal magnetic release type 415 Volts, Ics = 100% Icu, breaking capacity 35 KA including all fixing accessories with both ends spreader links - 02 Nos (UPS room and exchange) (b) 4 pole MCCB 100 Amps with rotary handle, adjustable thermal magnetic release type 415 Volts, Ics = 100% Icu, breaking capacity 25 KA including all fixing accessories with both ends spreader links - 05 Nos (conf rooms & Spare) (c) Enamelled iron danger notice plate of 1.60 mm thick mild steel sheet of size 200 mm x 150 mm , white with letters , figures and conventional skull and bones in signal red and fixed with nuts and bolts on door / shutter - 03 Nos. Make of Panel : Power control system Indore/RR Engineering Indore/L&T

Item No. 15 :- M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth strip of size 32 x 6 mm thick by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 40 mm dia. light grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type of soil/strata and testing on completion. Note :- GI earth strip 32x6 mm and 40 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted.

Internal Electrification

Item No. 16 :- Taking down copper /aluminum point wiring (light, fan, bell, socket or power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition separately) and making good disturbed surfaces of walls, floors etc complete all as specified and directed at site.

Item No. 17 :- Taking down ceiling fan/ exhaust fan/ wall fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard of AGE E/M complete all as specified and as directed.

Item No 18 :.Taking down carefully copper/aluminum Sub main wiring of any size from surface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed.

Item No. 19 :- Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed.

Item No. 20 :- M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following :-

(a) One light point controlled by one, one way switch 5 Amps

(b) One light point controlled by one, two way switch 5 Amps

(c) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator

(d) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

(e) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board.

(f) One bell point controlled by one, bell switch 5 Amps

Item No 21 : - Description all as per item No 20 here in before but using 2.5 sq mm single core copper conductor cable of multistranded FRLSH PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket combination point including necessary running of 2.5 sq mm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly.

Item No. 22:- Description all as per item No. 20 here in before but using 4.0 sq mm single core copper conductor FRLSH cable of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket combination point including necessary running of 4.0 sq mm PVC insulated copper conductor FRLSH cable as earth continuity conductor along with wiring and connecting to the common earth dolly. (for AC Point)

Item No. 23 :- S & F for Modular Switch piano flush type, single pole, one way, and 5/6 Amp single module complete all as specified.

Item No 24 - S & F for Modular Switch piano flush type, single pole, two way, and 5/6 Amp single module complete all as specified

Item No. 25:-S & F for Modular Switch piano flush type, single pole, one way, and 15/16 Amp single module complete all as specified.

Item No. 26 :- S & F for Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified.

Item No. 27:- S & F for Modular Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified.

Item No 28 : - S & F for modular step type , capacitive fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed.

Item No. 29 :- S & F for for Bell push modular 6 Amps single module complete all as specified.

Item No. 30 :- S & F for Ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified

Item No. 31 :- S & F for Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed

Item No. 32 :- M & L for Sub main wiring with approved colour coding as per IS with four single core PVC insulated FRLSH cable with stranded copper conductor of size 10 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessories ISI marked heavy duty of suitable size including concealed in wall etc one runs of PVC insulated with 10 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Four runs of 10 sqmm cable, one runs of 10 sqmm cable and one run of PVC conduit will be measured as one unit

Item No. 33 :- M & L for Sub main wiring with approved colour coding as per IS with four single core PVC insulated FRLSH cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessories ISI marked heavy duty of suitable size including concealed in wall etc two runs of PVC insulated with 6 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Four runs of 6 sqmm cable, one runs of 6 sqmm cable and one run of PVC conduit will be measured as one unit

Item No. 34 :- M & L for Sub main wiring with approved colour coding as per IS with four single core PVC insulated FRLSH cable with stranded copper conductor of size 4 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessories ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 4.0 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Four runs of 4 sqmm cable, one run of 4 sqmm cable and one run of PVC conduit will be measured as one unit

Item No. 35 :- M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessories ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable, one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit

Item No. 36 :- S & F for lamp holder , PVC / Polycarbonate type with back plate suitable for batten/ slanting fittings complete all as specified and directed.

Item No. 37 :- S & F for Highly efficient LED Bulbs, 5 W in B-22 cap complete all as specified and directed of Make Bajaj, Havells, Philips

Item No. 38 :- S & F for Box type (decorative) wall mounted LED light fitting including LED tube 4' x 20 watts with output of 2400 lumens, 230 volts with extruded aluminum heat sink provided for efficient heat dissipation and integrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed.

Item No. 39 :- M&L for Suspension (Pendant) luminaires 40 watts with efficient Diffuser ensuring perfectly uniform illumination, ensured optimized and unparalleled light distribution. Inter-connectable luminaires for aesthetically appealing down light application including necessary fixing the hanging wires from RCC ceiling with suitable fastners,mounting end cap, making good disturbed surfaces with necessary mason and painting work to match with the existing surfaces all as specified and directed. Make :- Make Bajaj Cat part No BPCS 40 W LED 4F WH, or its equivalent in Wipro, Philips.

Item No. 40 :- S & F for LED tube light fitting 2 feet x 10 watts mirror type with high out put diffuser, decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to fitting complete all as specified and as directed.

Item No. 41 :- S & F for Energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opal diffuser pre wired with warranty option of 5 years from date of installation and necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb complete all as specified and as directed. Make :- Bajaj Cat No BIBWP 10W LED or its equivalent in Philips, Wipro.

Item No. 42 :- S & F for Energy saving new generation environmental friendly long life versatile pressure die cast aluminum IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 30 watts, lumen output >=110 lm/W with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including including 40 mm dia GI pipe 1.2 mtrs length bend into size with brackets, clamps, nut, bolts complete all as directed by Engineer- in-charge. Make :- Bajaj / Philips / Wipro.

Item No. 43 :- S & F for LED luminaire 600 mm x 600 mm square LED panel 36 watts,lumen output>=110 lumen/watt 220 volts, AC , surface mounted type type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling, including connecting up with driver three core flexible copper conductor cases of suitable size complete all as directed by Engineer- in-charge.

Item No. 44 :- S & F for LED luminaire 600 mm x 600 mm square LED panel 35/36 watts, lumen out put >=122 lumen per watt , 220 volts, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling, including connecting up with driver three core flexible copper conductor cases of suitable size complete all as directed by Engineer- in-charge.

Item No. 45 :- S & F for LED down light luminaire round shape 12 watts, 175 mm dia white finish operating voltage 150 Volts - 270 Volts AC, 50 Hz, recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling, including connecting up with driver three core flexible copper conductor cases of suitable size complete all as directed by Engineer- in-charge.

Item No. 46 :- S & F for LED down light luminaire round shape 15 watts, 225 mm dia white finish operating voltage 150 Volts - 270 Volts AC, 50 Hz, recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling, including connecting up with driver three core flexible copper conductor cases of suitable size complete all as directed by Engineer- in-charge.

Item No. 47 :- S & F for LED down light recess mounted luminaire, square type 15 watts with efficiency of 100 lumens per watt, sleek design with polycarbonate body housing polycarbonate diffuser white finish operating voltage 150 Volts - 270 Volts AC, 50 Hz all as per Make- Bajaj Cat Part No BPSLR 15W NW PRO SQ, or its equivalent in Wipro, Philips.

Item No. 48 :- Fixing only for LED luminaire 600 mm x 600 mm square LED panel 35/36 watts, recess mounted light fitting obtained from item No 16 with necessary electrical connections complete all as specified and as directed

Item No. 49 :- S & F Integral decorative LED bollard with polycarbonate diffuser square shaped with IP 65 protection suitable for 9 watts LED bulb with necessary MS base box made out of MS sheet of 2 mm thick of suitable size embedded in PCC 1:2:4 base, electrical connections with adequate size including removal of old unserviceable one complete as all specified and as directed. Make: Bajaj Cat part No BGBOS 600 9W LED, Philips Cat Part No BCP 150 LED 150 WW or its equivalent in Wipro.

Item No. 50 :- S & F for TPN phase segregated distribution board double door vertical type 6 way 415 volts, 50Hz suitable for MCCB incomer IP 43, IK 09 protection on wall/ floor with necessary cement work and electrical connections complete all as specified. Make: L&T Cat Part No DBPGL006DD or in equivalent in Make: Legrand / ABB / L&T

Item No. 51 :- S & F for sheet metal enclosure MCB DB TPN 6 way , IP 43, IK 09 Vertical type with 200 Amps rated bus bar 415 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonry etc and making good of disturbed surface to match with existing colour of wall complete all as specified and as Make: Legrand / ABB / L&T

Item No 52 : - S & F for sheet metal enclosure MCB DB TPN 4 way IP 43, IK 09 ,Vertical type with 200 Amps rated bus bar 415 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonry etc and making good of disturbed surface to match with existing colour of wall complete all as specified and as directed. Make: Legrand / ABB / L&T

Item No. 53:- S & F for sheet metal enclosure MCB DB SPN 12 way , IP 43, IK 09 with 200 Amps rated bus bar 240 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonry etc and making good of disturbed surface to match with existing colour of wall complete all as specified and as directed. Make: Legrand / ABB / L&T

Item No 54 - S & F for sheet metal enclosure MCB DB SPN 8 way, IP 43, IK 09 with 200 Amps rated bus bar 240 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonry etc and making good of disturbed surface to match with existing colour of wall complete all as specified and as directed. Make: Legrand / ABB / L&T

Item No. 55:- S & F MCCB TPN 415 volts, Icu=100% Ics with rupturing capacity 25 KA suitable for fixing on DB of capacity 63 to 100 Amps with extended terminals complete all as specified. Make: Legrand / ABB / L&T

Item No. 56 :- S & F for MCB triple pole and neutral rated capacity 63 Amps, 415 Volts breaking capacity 16 KA, 'C' curve complete all as specified and as directed. Make: Legrand / ABB / L&T

Item No. 57:- S & F for MCB Single pole and neutral rated capacity 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed. Make: Legrand / ABB / L&T

Item No 58 : - S & F for MCB Single pole rated capacity 40 to 63 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed. Make: Legrand / ABB / L&T

Item No. 59 :- S & F for MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed. Make: Legrand / ABB / L&T

Item No. 60 :- M&L for single pole and earth enclosure with a two pin and earth plug with socket 240 Volts, 50 Hz complete with one single pole MCB SP 20 Amps complete all as specified and directed. Make: Legrand / ABB / L&T

Item No. 61 :- M&L for Triple pole and earth enclosure with a three pin and earth plug with socket 415 Volts, 50 Hz complete with one triple pole MCB TP 32 Amps complete all as specified and directed. Make: Legrand / ABB / L&T

Item No. 62 :- S & F for Modular type TV Socket out let complete all as specified and as directed.

Item No. 63 :- S & F for Modular type Telephone socket outlet complete all as specified and directed.

Item No. 64 :- S & F for Modular type RJ 45 with shutter complete all as specified and as directed.

Item No. 65 :- Labour only for refixing the celling fan/ Exhaust fan obtained from item No 17 above with replacement of unsv 3 core PVC insulated PVC sheated 3 core multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal including over hauling the fan, painting of ceiling fans complete with two coats synthetic enamel paint by spraying including filling cavities with filler after cleaning all dust etc and writing the MES Number with synthetic enamel paint complete all as specified and as directed.

Item No. 66 :- Labour only for refixing the wall fan obtained from item No 17 above including over hauling the fan and cleaning all dust etc and writing the MES Number with synthetic enamel paint complete all as specified and as directed.

Item No. 67 :- S & F for ceiling fan, 230 Volts, 1200 mm sweep with minimum air delivery 210 CFM, service value of the fan shall be greater than 8 as per BIS with blades, down rod & other necessary accessories with brushless direct current motor (BLDC) without remote system including capacitor type fan regulator and electrical connections from ceiling rose to fan terminal including writing the MES Number with synthetic enamel paint complete all as specified and as directed.

Item No. 68 :- M&L for wall fans 450 mm sweep, 230 volts, 50 Hz complete with mounting brackets all as specified and directed

Item No. 69 :- S & F for energy efficient exhaust fan of 300 mm sweep made of metal body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base including writing the MES Number with synthetic enamel paint complete all as specified and directed. Note :- Cost of suitable opening wall for fixing exhaust fan is deemed to be included in overall rate quoted).

Item No. 70 :- S & F for energy efficient exhaust fan of 400 mm sweep made of metal body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base including writing the MES Number with synthetic enamel paint complete all as specified and directed. Note :- Cost of suitable opening wall for fixing exhaust fan is deemed to be included in overall rate quoted).

Item No. 71 :- S & F for PVC non-metallic rigid conduit ISI marked heavy duty white/ Ivory colour and its accessories heavy duty ISI marked of size 40 mm dia for LAN, telephone and TV connections including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed.

Item No. 72 :- S & F for PVC non-metallic rigid conduit ISI marked heavy duty white/ Ivory colour and its accessories heavy duty ISI marked of size 25 mm dia for LAN, telephone and TV connections including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed.

Item No. 73 :- S & F for PVC non-metallic rigid conduit ISI marked heavy duty white/ Ivory colour and its accessories heavy duty ISI marked of size 20 mm dia for LAN, telephone and TV connections including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed.

Item No. 74 :- Supply and fix Hot dipped Galvanized CABLOFIL wire mesh cable trays should comply Standard EN ISO 1461, manufactured with a longitudinal 'T- welded' safety edge, constructed with 50 X 100 mm mesh configuration including couplers, covers with clips and wall mounting accessories as per site requirement. Supports, brackets or hangers, covers designed loading capacities of the brackets and the hanger torques must be tested in accordance with the standard IEC 61537 of size 150 mm width x 54 mm height also including taking down existing XLPE cable any size from wall , ceiling etc and relaying/refaxing the same cable tray with necessary cable connections & making good disturbed surfaces with cement, putty , painting to match with the existing surfaces complete all as specified and as directed.

Item No. 75 :- Supply, installation, commissioning and testing indoor type LT wall mounting Panel Board of minimum size 1.20 m (height) x 1.20 m (breath) x 0.30m (depth) suitable to accommodate the following accessories, factory made CPRI approved panel, weather, dust & vermin proof indoor, double door, front operable, including all incoming & outgoing MCCB's/ MCB's made out of 2.00 mm thick mild steel CRCA sheet with suitable size angle iron supporting frame including applying two coats of Powder coated paint over a coat of red oxide zinc chrome primer over exposed external & internal surfaces suitable for 3 phase 4 wire system 415/440 volts grade including with copper bus bar wrapped with PVC tape/sleeves with maintained the colour code and copper strip/wire bus bar of suitable size complete and internal wiring with 10 sqmm copper wire and connections of all outgoing / incoming cable for MCCB input and MCCB/MCB output of suitable length for connection of cable from main busbar of any size complete all as directed by Engineer-in-Charge.

OUTGOING (a) MCCB, 4 Pole, Ics=100% Icu , 415 volts, Lcu=25 KA breaking capacity, rating 63 Amps, adjustable thermal magnetic release including all fixing accessories with both ends spreader links - 04 Nos (for Phase segregated DBs) (b) MCB TPN 63 amps, 240 volts, ‘C’ curve, 10 KA all complete as specified and as directed - 06 Nos (for MCB DB TPN) (c) MCB SPN 40 amps, 240 volts, ‘C’ curve, 10 KA all complete as specified and as directed - 10 Nos (for MCB DB SPN) Make of Panel : Power control system Indore/RR Engineering Indore/L&T

Item No. 76 :- M & L for taking out/ removing carefully Split type air conditioner indoor and outdoor unit complete with copper tubing of any size and depositing to MES store yard of AGE E/M/ user concerned and refixing the same after completion of building repairs with making necessary opening size, cutting of wall any type/ thickness and fixing of AC after necessary servicing, making it functional to archive the proper cooling parameters and suitable arrangement for fixing of AC complete all as specified and directed.

Item No. 77 :- M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. light grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type of soil/strata and testing on completion. Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted.

Item No. 78 :- Taking down cement plaster any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

Item No. 79 :- M & L fly ash brick work with modular brick straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Item No. 80 :- M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in lintels upto 1.5 m clear span, coping, benching, bed block, lintel band, plinth courses etc and similar work including weathering,slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.

Item No. 81 :- M&L for rendering 10 mm thick in CM 1:6 on fair faces of brick or concrete surface of wall and finished even and smooth with out using extra cement complete all as specified and directed.

Item No. 82 :- M&L for rendering 5 mm thick in CM 1:3 on concrete surface as in ceiling surface and finished even and smooth with out using extra cement complete all as specified and directed .

Item No. 83 :- M&L for rendering 15 mm thick in cement mortar 1:4 in two layers, 10 mm thick plaster in first coat with WPC and second coat 5 mm thick with WPC as per manufactures instruction, surfaces, surfaces finished even and smooth without using extra cement, complete all as specified and directed.

Item No. 84:- Supply only liquid water proofing compound, ISI marked omplete all as specified and directed.

Item No. 85:- M&L for PCC (1:3:6) type C1 using 20 mm graded stone aggregate as in plinth protection or similar places, surface finished even and fair without using extra cement incl necessary use and waste of form work complete, & incl demolition of PCC complete all as specified and directed.

Item No. 86 :- Taking down of eaves gutters and rain water pipes of any size or pattern including all fittings etc complete all as specified and directed.

Item No. 87 :- M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls of 110 mm bore of pipe etc complete all as specified and directed.

Item No. 88- S&F PVC (SWR) bends any radius of 110 mm bore with access door complete all as specified and directed.

Item No. 89 :- M & L for chipping of spalled and loose concrete and cleaning rust from re-inforcement by sand blasting, scrubbing down concrete surface with wire brushes with wire brushes cleaning with water allowed to dry and applying alayer of zinc rich epoxy primer as antirust on all exposed reinforcement followed by a layer ofbonding coat of approved epoxy adhesive on complete exposed surfaces of concrete to be gunited all as specified and applying two layers of guniting over steel welded mesh 2mm dia of wire and aperture 75mm, total thickness of gunite n.exc 25mm thick (average thickness) in cement mortar 1:2 using OPC 53 grade cement mixed with polycrete admixture @ 2% by weight of cement or as per manufacturers instructions and finally applying cement plaster over gunited surface of required thickness to give even, uniform and amooth finish conforming to proper gerometrics incement mortar (1:3) to match with the existing surface as in sides and soffits etc of slabs, chajjas, fins, facias, parapets, columns and beams etc complete including necessary scaffolding, shuttering, necessary chases to brick work or RCC members at any height upto 4 storey bldgs all as specified and directed. (Note: steel welded mesh is to be tightend / welded with the existing re-inforcement. The cost of welded mesh is deemed to be included in the unit rate quoted by the contractor).

Item No. 90 :- Demolition of cement concrete (unreinfoced) of any description and in any position complete all as specified and directed.

Item No. 91 :- M&L for PCC 1:5:10 type E-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

Item No. 92 :- M&L for rendering 15 mm thick in CM 1:3 mixing with integral water proofing compound as per manufacturers instruction on concrete/ brick surfaces, finished even and smooth without using extra cement complete all as specified and directed Note: WPC will be measured and paid separately

Item No. 93 :- M&L for apply one prime coat acrylic polymer modified water proofing coating (Brushbond of FOSROC or equivalent) and over that two coats of acrylic polymer modified two component elastomeric water proofing membrance coating (Brush band of fosroc mate or equivalent) complete all as specified as per manufacturers instruction as directed by engineer-in-charge. Make: Fosroc,Sika, Dr fixit. Note: (1) This item shall only be executed through level 4 or level 5 certified and authorised applicator of the company. (2) A warranty for 5 years in the form of written agreement shall be submitted by the contractor. (3) The rate quoted by the contractor shall include all the provision mention in this item including notes.

Item No. 94 :- S&F 32 mm bore low density polyethylene pipes (DPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc incl clamping complete all as specified and directed.

Item No. 95 :- S&F in repairs vitreous china squatting pan, orissa pattern 580x440mm white with integral foot rests excluding flushing cistern and flush pipe including connection to trap and to flushing pipe, anti-syphonagw pipe, etc complete including making good to floor complete all as specified and directed.

Item No. 96 :- S&F in repairs Vtreous china wash down water closet pan (pedstal pattern), white including pedestrial pan and PVC (P) trap, including seat cover for pedestial pan and connecting to drain or outgoing pipe and to flushing pipe, antisyphonage pipe etc complete all as directed and specified.

Item No 97 - S&F in repairs 10 Ltrs PVC (white) valve less symphonic action type, flushing cistern low level with inlet ball valve float, handle including brackets etc, complete all as specified.

Item No. 98 :- S&F in repair PVC connection 15 mm size with PTMT nuts of length 600 mm complete all as specified.

Item No. 99 :- S&F in repair Vitreous China urinal bowl, half stall coloured, with CP urinal spreader for fixing with 15 mm dia pipe. type union for discharge pipe, PVC waste pipe 32mm bore, providing and fixing plugs, bedding urinals against the wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long steel screws, pointing around the urinal back in cement, complete all as specified and directed.

Item No. 100 :- S & F in repairs vitreous chine wash hand basin, white, flat back (oval shaped under counter) of size 550 x 400mm including 32mm brass CP waste coupling complete all as specified and as directed .

Item No. 101 :- S & F 75 mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls or floor complete all as specified and directed.

Item No. 102 :- S & F in repairs 110 mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls or floor complete all as specified and directed.

Item No. 103 :- S & F in repair 110 mm bore PVC (SWR) bend any radius complete all as specified and directed.

Item No. 104 :- S & F in repair 75 mm bore PVC (SWR) bend any radius complete all as specified and directed.

Item No. 105 :- S & F in repair 110 mm bore PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed.

Item No. 106 :- S & F in repair 75 mm bore PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed.

Item No. 107 :- S & F in repairs PVC (SWR) Floor trap/Nahani trap plain or multi with stainless steel grating incl joining to waste pipe with solvent cement joint dia of outlet 75 mm bore complete all as specified and directed.

Item No. 108 :- S & F in repair 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.

Item No. 109 :- S & F in repair 75mm bore PVC (SWR) vent cowl complete all as specified and directed.

Item No 110 - S&F of CPVC 20 mm outer dia pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or in floors incl taking up or down steel tubing pipe complete all as specified and directed.

Item No 111 - S&F of CPVC 25 mm outer dia pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or in floors incl taking up or down steel tubing pipe complete all as specified and directed.

Item No 112 - S&F of CPVC brass elbow (3/4" X 1/2") for 20 mm outer dia CPVC pipe complete all as specified and directed.

Item No 113 - S&F of CPVC brass tee for 20mm outer dia pipe complete all as specified and directed.

Item No 114 - S&F of CPVC brass tee for 25 mm outer dia pipe complete all as specified and directed.

Item No 115 - S&F of CPVC Male brass Threaded Adaptor (MTA / MBTA) for 20 mm outer dia pipe complete all as specified and directed.

Item No 116 - S&F of CPVC Male brass Threaded Adaptor (MTA / MBTA) for 25 mm outer dia pipe complete all as specified and directed.

Item No 117 - S&F of CPVC Tank Adaptor for 25 mm outer dia pipe complete all as specified and directed.

Item No 118 - S&F of CPVC union for 20 mm outer dia pipe complete all as specified and directed.

Item No 119 - S&F of CPVC union for 25 mm outer dia pipe complete all as specified and directed.

Item No 120 - S&F of CPVC Ball Valve for 25 mm outer dia pipe complete all as specified and directed.

Item No. 121 :- S&F Rotational moulded polyethylene water storage tanks (ISI market) (cylindrical vertical with closed top) 500 litres capacity, hoisted and fixed in position incuding dismantling of PVC water tanks exc 250 ltr but not exc 500 ltr complete all as specified and directed.

Item No. 122 :- S&F Rotational moulded polyethylene water storage tanks (ISI market) (cylindrical vertical with closed top) 1000 litres capacity, hoisted and fixed in position incuding dismantling of PVC water tanks exc 500 ltr but not exc 1000 ltr complete all as specified and directed.

Item No 123 : S&F ball valves for 25 mm bore dia of pipe high pressure of PTMT with Epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 455 gms) complete all as specified and directed.

Item No. 124 :- S & F in repairs 15 mm bore bib taps long body, chromium plated cast copper alloy long body, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed. (Make: Pearl/Cera/Parryware).

Item No 125 : - S&F in repair Bidet spray (Health faucet) with 1 meter tube and holder, complete all as specified and directed. (make: Plumber Cat No IT - 1904 ITALIAN / PearlCat Part No HF-130/Jaquar CAT PART NO - ALD-CHR-583)

Item No. 126 :- S&F in repair CP Toilet paper holder, complete all as specified and directed by Engineer-incharge. MAKE:- Plumber Cat Part No. U-0916 /Jaquar Cat No CAN-1153N /OR EQUILENT complete all as specified and directed.

Item No. 127 :- S&F in repair brass chromium plated angle cock 15 mm dia screwed for iron pipe or brass ferrule, complete. Make : Plumber Cat No FLP-0507/Pearl Cat Part no PIS-103/Jaquar Cat Part No CQT-23059 complete all as specified and as directed.

Item No. 128 :- S&F in repair 15mm bore two way bib taps long body, chromium plated cast copper alloy long body, screwed down, screwed for iron pipe or for brass ferrule, complete. Make: Plumber Cat Part No EC-0209/Pearl Cat Part No BELL-455/Jaquar Cat Part No LYR-38041 complete all as specified and as directed.

Item No. 129 :- S&F aluminium anodised tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed.

Item No 130 :- S&F 15 mm dia bore brass chromium plated swan neck pillar tap with capstan heads screwed down high presure with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed. (Make : Plumber/Jaquar/kohler/cera).

Item No 132 :- S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railig 60 cm long fixed to plugs on wall complete all as specified and directed.

Item No 133 :- S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings,frame work of watertanks and similar work conforming to Fe -290 Gde E-165 complete all as specified and directed.

Item No. 134 :- S&F rolled mild steel section in roof trusses (framed), trussed, purlins, crane gantries,rail and fastenings and heavy bracket framing (beam, tee, angle,channel or flat sections) including distance pieces, cleat etc of grade Fe 410-W (Gde E-250) quality A complete all as specified and directed.

Item No. 135 :- S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as complete all as specified and directed.

Item No. 136 :- M&L Second class hard wood 35 mm thick factory made glazed and skeleton shutters, open rebated and prepared to receive glass , gauze etc, divided into square,with plain, chamfered or rounded,mitered and rebated sash bars,any number, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR part I section 8 clause 8.20 (a) complete all as specified and directed.

Item No. 137 :- S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as complete all as specified and directed.

Item No. 138 :- S&F fibre glass reinforced translucent corrugated sheeting 2 mm thick with two corrugation side lap fixed with coach screws and washers in roof, wall etc complete all as specified and directed. complete all as specified and directed.

Item No. 139 :- M&L for preparation of new or previously untreated surfaces of steel of any description, over 10cm in width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Item No. 140 :- Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth for foundation etc or for shafts, wells cesspits manholes pier holes etc not exceeding 10 sqm on plan and in any type of soil etc complete all as specified and directed

Item No. 141 :- Returning, filing in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in any type of soil etc complete all as specified and directed

Item No. 142 :- Removal of excavated materials not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting points etc complete all as specified and directed

Item No. 143 :- M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

Item No. 144 :- M & L brick work with fly ash modular bricks straight or curved on plan exc. 6 m mean radius built in cement mortar 1:4, complete all as specified and directed.

Item No. 145 :- M&L for rendering on fair faces of brick work or concrete surface of wall 15mm thick in CM 1:4 and to be finished even and smooth with out using extra cement complete all as specified and directed

Item No. 146 :- M&L Extra for forming fair finished drain or channel 45 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified and directed.

Item No. 147 :- S&F reinforced concrete pipes, class NP-2, laid and jointed with collars of 300 mm bore of pipe complete all as specified and directed.

Item No 148 :- Dismantling wrought iron or mild steel work of any description not otherwise provided for angle iron pickets or fencing post or any description etc complete all as specified and directed.

Item No. 149 :-M & L for complete removal of exisiting wall treatment on old plaster or concrete surface by scraping tin platem leaned of all laitance, loose material, oil grease by mechanical means such as wire brushing & shot blasting, finally vacum cleaning of all loose solid partcals complete as directed and specified.

Item No. 150 :- M&L for preparation of newly / old plastered surfaces of wall & concrete and applying 1 mm thick wall care putty including rubbing the surface absolutely even and smooth all as per manufacturer instruction, complete all as specified and directed.

Item No. 151 :- M&L for applying two coats of oil bound distemper on wall or concrete over a coat of alkali resistant primer on prepared surfaces including rubbing the surface absolutely even and smooth including washing floor, cleaning glas, joinery, electrice board, fans etc, complete all as specified and directed.

Item No. 152 :- M&L for two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004, Alkali and fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) 1.43 litre/10sqm over and including priming coat of exterior primer applied @ 0.90 litre /10sqm over new surface including preparation of new surfaces.

Item No. 153 :- M & L Preparation of old decorated surfaces of wall & ceiling by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and trading oil and greasy spots from plastered or unflustered surfaces including cornices, pilasters etc and apply one coat of white wash including washing floor, cleaning glas, joinery, electrice board, fans etc, complete all as specified and directed.

Item No. 154 :- Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exc 1.5 Sqm each complete all as specified

Item No. 155 :- Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding exc 1.5 Sqm but not exc 4.00 Sqm each complete all as specified

Item No. 156 :- Taking down shutters of any description exc 1.00 sqm but n exc 2.00 Sqm each and removing to or from store,complete all as specified.

Item No. 157 :- Taking down shutters of any description exc 1.00 sqm but n exc 2.00 Sqm each andrefixing in same opening after repair, complete all as specified.

Item No. 158 : S & F factory made single extruded WPC (wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC Polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms fabricated with miter joints after applying PVC solvent cement and screwed with fullbody threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer - in - Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be measured and paid separately under relevant items).

Item No. 159 : M & L providing factory made 100% solid WPC (wood polymr composite) door frame 65mm x 100mm (straight) single rebated, made from wood polymer composite) Single extruded process) material compressing of virgin PVC polymer of K value 57-60 (suspension grade) calcium carbonate and natural fibers (wood powder/rice husk / wheat husk) and nor toxic additives fabricated with meter joints after applying PVC Solvent cement & screwed with full body treaded star headed screws having minimum frame density of 780 kg/ cum. Manufactured by ISO 9001-2015 certified company, having good screw holdingcapacity(screwwithdrawal strength of(Min 990N) minimum comressive strength of 58N/mm square, moduls elasticity900N/mm square and resistance to spread of flame of class A category with proprtyof being termite/ borer proof, water/ moisture proof & fire retardant & fixed in position with SS dash fasteners/ hold fast of required dia the and length, all as directed bythe engineer-in-charge. Material test certificate and authentication should be compulsory provided by the manufacturing company (hold fast or dash fasteners shall be measured and paid separately under relevant items).

Item No. 160 :- Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type lush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice wheat husk) and no toxic additives (maximum toxicity index of for 100 gms) having minimum densityof 650 kg/cum and screw withdrawal strength of 1800 N (face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof water/moisture proof and fire retadant, WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing wih stainless steel butt hinges of requiured size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-in-charge. (Note: stainless steel butt hinges and necessary S. S screws shall be measured and paid separately under relevant items).

Item No. 161 :- Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type lush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice wheat husk) and no toxic additives (maximum toxicity index of for 100 gms) having minimum densityof 650 kg/cum and screw withdrawal strength of 1800 N (face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof water/moisture proof and fire retadant, WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing wih stainless steel butt hinges of requiured size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-in-charge. (Note: stainless steel butt hinges and necessary S. S screws shall be measured and paid separately under relevant items).

Item No 162 : S&F Extruded aluminium alloy handles fabricated type anodized 150mm size complete all as directed and specified.

Item No. 163 - S&F 150mm long aluminum anodized barrel tower bolt of extended section complete all as directed and specified.

Item No. 164 :- S&F Butt Hinges, extruded Stainless seteel with galvanised mild steel hinge pin, anodized and fixed, type C-21, 100mm size complete all as directed and specified.

Item No. 165 :- S&F 300mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy.

Item No. 166 :- M&L for floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, 150mm long, fixed in floor complete all as specified

Item No. 167 :- S&F 35 mm thick flush shutters, solid core construction, with particle board core and plywood face panels, both sides is covered with decorative face veneer with lipping / frame to match complete all as specified and directed.

Item No. 168 :- S&F 35 mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Item No. 169 :- M&L Preparation of new or previously untreated wood or wood based surfaces of any description exc 10 cm in width or girth and applying two coat of synthetic enamel paint over a cote of pink primer, complete all as specified and directed.

Item No. 170 :- M&L Preparing old wooden surfaces of any description exc 10 cm in width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

Item No 171 : S&F Powder coated aluminium sliding glazed windows with three track shutter sliding (two shutters glazed and one shutter wire mesh ) shall be two part as upper part shall be three movable shutter and lower part consist three shutter (one openable in centre and both side fixed type shutter with frosted glass) with following specification and making good the adjacent side of jombs of windows by plastering in CM 1:3 even and smooth complete etc. shifting of existing cooler stand where required complete all as specified and directed by Engineer - in - Charge.

(i) Windows frame of cross section 101mm x 44mm x 1.5mm thick. (ii) Three way track for sliding shutters of cross section 91.8mm x 31.75mm 1.1mm thick (iii) Sliding shutter frame of cross section 40 x 18 x 1mm thick (iv) 4mm thick tinted glass superior quality. (v) IDPE Rubber guasket for fixing of glass. (vi) locking cleats per shutter - 01 Nos. (vii) sliding rollers per shutter - 02 Nos. (viii)stainless steel wire cloth 0.30mm nominal dia of wire and average width of aperture 1.40mm for shutters 01 Nos. (ix) fixing screw for frame with wall per windows 10 Nos.

Item No. 172 :- S&F powder coated aluminium ventilator cross section 63.5x38.10x1.5mm consisting of two partion shall have louvers with 3mm thick pin headed glass and aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56m fixed with aluminium beads and securing on outer face of frame and lower portion of ventilation shall be fixed with 3mm thick pin headed glass with IDPE rubber gasket includinng aluminium beads, including preparation of jombs all around in Cm 1:3 finishing even and smooth complete all as specified and directed.

Item No. 173 :- S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors,windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge

Item No. 175 :- Supply 12 mm th Pre laminated exterior grade both side laminated board complete all as specified and directed.

Item No. 176 :- S&F door closer hydraulically regulated designation No 3, universal type, suitable for door shutter of weight between 61 to 80 Kg of aluminium (extruded section) body complete all as specified and directed.

Item No. 177 :- S&F in repair 25mm dia stanless steel curtain rod of 1mm thick fancy type fixed with modren bracket & doms design & sample approved by Engr-in- charge / GE complete all as directed and specified.

Item No. 178 :- Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises complete all as specified and directed.

Item No. 179 :- M&L vertified ceramic tiles light shade 09 to 10 mm thick (square/rectanular) polished, area of each tiles not exceeding 0.36 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20mm screed bed in cement mortar 1:4 complete all as directed and specified.

Item No. 180 :- M&L for non skid ceramic coloured tiles of design as approved by GE 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortor 1:6 complete all as specified and directed.

Item No. 181 :- M&L for non skid ceramic coloured tiles of design as approved by GE 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortor 1:6 complete all as specified and directed.

Item No. 182 :- M&L for glazed ceramic coloured tiles 350 x 250 x 7 mm / 450 x 350 x 7 mm thick on vertical surface such as dado / skirting / risers to steps etc jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including rendering 10 mm thick in cement mortor 1:4 complete all as specified and directed. Note- (i) The size of tiles (except thickness) may be varied during execution without any price adjustment.

Item No. 183 :- M&L for brushing neat cement slurry with 3 Kg of cement per sqm complete all as specified and directed.

Item No. 184 :- M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base flooring 25 mm thick surface finished even and rough to receive the topping layer complete all as specified and directed.

Item No. 185 :- S & F Exposed metal frame ceiling with 6 mm thick calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600 mm grid includig anodised aluminium snap grid 605 x 605 mm frame work with hangers 6 mm dia GI (upto 1200mm lenth) addjusting level fixed to roof slabs with expansion hold fasteners 12.5 dia for false ceiling, complete all as specified and directed.

Item No. 186 :- M & L heritage regular flakes finish which is made from china clay, pigments homo polymer emulsion and bonding agent Acrylic emulsion top (glossy/matt) finished based on solvent based polymer 0.8mm to 1.2mm the single coat as per approved shade, as per manufacturers instructions and applying on plaster/unplaster surfaces of walls, columns, soffits and chajja etc complete all as specified and directed.

Item No. 187 :- Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed.

Item No. 188 :- M&L for granite of any type tiles 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete & incl 15 mm thick screed bed built in CM 1:4 complete all as specified and directed.

Item No. 189 :- M&L Rounding to edges of stone slabs one edges, such as in steps, cooking platform, and other simila situations for bulllnosing / moulding to exposed edges ( any type) and polishing to match the adjoining surfaces complete all as specified and directed.

Item No. 190 :-Dismantling wall and ceiling boards (fibre, pulp, insulation, etc). Or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

Item No. 191 :- S&F solid PVC Wall Lining consisting of 5 mm thick single side prelam PVC sheet used instead of plain colour sheet including PVC sheet fillet of width 35 mm fixing on wall with screw and PVC rewl plug to make PVC frame for fixing of wall paneling with solvent cement etc. complete all as specified and directed

SCHEDULE "A" (Schedule of credit) Schedule of Credite Rs 227221.50 (Minus) inserted by the MES (Note : Credite amount shall be deducted manually to arrive net bid amount)

VEENUS ENGINEERS

M/S UnitedConstruction

Miittal Construction

R. S. JAIN AND SONS

m/s meetu enterprises

M/s Gupta Constructions