Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.8 LAccepted-AOC SAI VILLA C 65 EKTA NAGAR BAREILLY 243122 U P C 09 HQ CESC PUNE | BAREILLY | UTTAR PRADESH | 243122 | L1 | Accepted-AOC Lowest | |
| 2 | L2₹19.6 L+₹71,063.67 (3.76%)Rejected-Finance | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹19.9 L+₹96,682.27 (5.11%)Rejected-Finance | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹20.0 L+₹1.1 L (5.82%)Rejected-Finance | L4 | Rejected-Finance Not Lowest |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
3 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Kamptee
Garrison Engineer, Kamptee Cantt - 441 001
REPAIR/ MAINT OF CERTAIN B/R WORKS AND POST CONSTRUCTION ATT AT AREA-I UNDER GE KAMPTEE
2022_MES_524677_2
8398/E8
Open Tender
Civil Works
Item Rate
120 days
Kamptee
Class E, Cat a (i)
7 documents required · 7 mandatory
₹500
Yes
GE Kamptee
₹40,000
Yes
30 Aug 2022
28 Jun 2022
5 Aug 2022
28 Jun 2022
3 Aug 2022
6 Jul 2022
Amount
M&L for post construction anti termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed.
M&L for post construction anti termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and directed.
M&L for post construction anti termite treatment of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and directed.
M&L for post construction anti termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed. Note for Item No 1 to 4:- The item Ser No 1 to 4 must be executed by a specialize agency who has a valid pest control operator license and must be a member of Indian Pest Control Association.
Taking down and refixing of shutter of not exceeding 1 Sqm each complete all as specified and directed. Note: Refixing, easing and adjusting and also refxing builders hardware as required including removal of unserviceable screws etc.
All as per item No 5 above but exceeding 1 Sqm not exc 2 Sqm each complete all as specified and directed.
All as per item No 5 above but exceeding 2 Sqm each complete all as specified and directed.
Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frame) complete all as specified and directed.
Taking down Chowkats or frames exceeding 1.5 Sqm and not exceeding 4 Sqm each (Without taking off shutters from the frame) complete all as specified and directed.
M&L for marble 18-20 mm thick (of colour as approved by GE), (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shadeand pointed in white cement including cutting, polishing (mirror type) or use in shelf and cupboard etc complete all as specified and directed.
S&F framed work as in doors or gates of angle or other section with gusset plates, rails braces, etc. complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering running rails and guides) hanging; also fastening and fixing complete Fe 410 -W (Gde-E- 250) quality A complete all as specified and directed.
M&L for two coats of synthetic enamel painting over a coat of red oxide primer including preparation of new steel surface over 10 cm width or girth complete all as specified and directed.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with MS square tube & edges will be painted to match with printed sheet complete all as specified and directed.
Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles and disposal of rubbish outside of MD land complete all as specified and directed.
M&L for brick work with fly ash bricks old size, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.
All as per item No 15 above but half brick wall in CM 1:4 complete all as specified and directed.
Taking down cement or cement plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc and disposal of rubbish outside of MD land complete all as specified and directed.
M&L for rendering 15mm thick in CM 1:6 on brick work or concrete surfaces including finished fair and even complete all as specified and directed.
M&L for rendering 15mm thick in CM 1:4 on brick or concrete surfaces even & fair smooth, using water proofing liquid compound and without using extra cement complete all as specified and directed. Note:- water proofing liquid will be measured and paid separately.
M&L for preparing new plastered surfaces and applying two coats of OBD over a coat of primer and two coats of wall care putty etc complete all as specified and directed.
M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of cement primer complete all as specified and as directed.
S&F factory made U-PVC white/colour three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed.
S&F factory made 37mm thick multi wall WPC extruded door (including with necessary hanging arrangements (Min three hinges), 6 lever mortise lock, brass knob handle tower bolt ane necessary fittings arrangements etc) with design colour PVC laminates sheet, 100% termite free, weather resitant, including supplying & fixing of frame as per manufacturer's specification & drawing including necessary taking down of old door with frame and necessary finishes of wall surface such as rendering (CM 1:6), distemper etc complete all as specified and directed.
S&F factory made solid panel PVC moulded door shutter, (with wood free EPS) 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing cement complete all as specified and directed.
S&F factory made solid panel PVC door wire gauzed i.e. panel will be of wire gauze both side pre-laminated PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S tubes. The wire gauge shall be stretched to tighten firmly partly wired and partly panelled shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails M.S. tube shall be covered with heat moulded wood grain colour PVC 'C' channels having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain colour pvc sheet for top rail, panelling of wood grain colour pvc sheet to be fitted in the M.S. framed welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined the together with solvent cement, supplying & fixing in the frame at site as per specification & drawing, complete all as specified and directed.
S&F 100mm long stainless steel (s/s) butt hinges. heavy weight, cold rolled mild steel, and fixed complete all as specified and directed.
S&F 200mm long s/s fancy type barrel tower bolts of extruded section complete all as specified and directed.
S&F 125mm long s/s fancy type handle cast type anodized complete all as specified and directed.
S&F floor door of s/s fancy type body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm long complete all as specified and directed.
S&F 250mm long s/s fancy type sliding door bolts, bolt type bolt 16mm dia with and including a min of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.
S&F door closer hydraulically regulated, designation No. 3, aluminium (extruded section body)universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.
S&F deco door seal (94Cm/36.5" or door width size) aluminium plate with nylon brush ivory matt complete all as specified and directed.
M&L for grouting in RCC wall/ floor/ roof through PVC nipples at a spacing of 45 to 60cm C/C including drilling injection points to a depth of 75-100mm, providing 10mm dia PVC nipples and pressure grouting using with and including cement mixed with plasticizing admixture like FOSROC / Dr fixit or as directed (model CEBEX100) or PIDILTE (model 207 PIDICRET 8AM) @ 225gms/50kg of cement to fill up all capilaries/ voids/ honeycombing, nozzles to be sealed with the sealing with prssure of 2 to 4 Kg/sqcm and continued till refusal. After instructions complete all as specified and directed. Note:- After ascertaining the location of leakage/ seepage/ dampness under relevant item shall be opereted of the required location.
Dismantling floor hearth or wall tiling including cement mortar bedding and disposal of rubbish outside of MD land complete all as specified and directed.
M&L for coloured non skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors/ wall etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15 mm thick screed bed of cement mortar (1:6) etc complete all as specified and directed.
M&L for coloured non skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors/wall et. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15mm thick screed bed of cement mortar (1:6) etc complete all as specified and directed.
All as per item No 36 above but as in skirting/ dado etc with 10mm backing in cement mortar 1:4 complete all as specified and directed.
M&L for coloured/ printed glazed ceramic tiles 300 x 450 x 6 to 7mm thick, in floors/walls skirting/dado etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles including rendering 10mm thick in CM 1:4 complete all as specified and directed.
M&L for light shade vitrified ceramic tiles 10mm thick (square/ rectangular) polished area each tiles not exc 0.36 sqm in floor/wall etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick screed bed of cement mortar (1:6) complete all as specified and directed.
All as per item No 39 above but as in skirting/dado etc with 10mm backing in cement mortar 1:4 complete all as specified and directed.
S&F in repair PVC valve less symphonic action type flushing cistern 10ltr capacity low level, white/ coloured with inlet ball valve float and handle including bracket (including taking down old cistern) and fixing of PVC flush pipe 32mm dia and PVC connection pipes complete all as specified and directed.
S&F pillar cock swan neck 15mm bore brass CP screwed for iron pipe including taking down existing one complete all as specified and directed. Make:- Prayag cat No 7814 or equivalent
S&F in repairs chromium plated shower square (200mm x 200mm) rose with or without swivel joints including shower arm as approved complete all as specified and directed. Make: Ess Ess / Essco / Jaquar / Hindware.
S&F in repair 15mm bore stop valves/ angle cock, cast copper alloy, screwed down, high pressure, with crutch or butterfly handles, screwed both ends for iron pipe or for unions and fixed fancy type chromium plated complete all as specified and directed.
S&F in repair 15mm bore two way angle /bib cock, cast copper alloy, screwed down, high pressure, with crutch or butterfly handles, screwed both ends for iron pipe or for unions and fixed fancy type chromium plated complete all as specified and directed.
S&F in repair 15mm bore concealed stop valves fancy type chromium plated cast copper alloy pressure with crutch or butter fly handles screwed both ends with long shank and cup (concealed type) for iron pipe or for union complete all as specified and directed. Make: Ess Ess / Essco / Jaquar / Hindware.
S&F in repair tubular towel rail, 20mm dia, D type, 60cm long between flanges chromium plated complete all as specified and directed. (Make:- Jaquar, Parryware & Prayag).
S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. (Make:- Jaquar, Parryware & Prayag)
S&F in repairs 3mm thick figured glass, pin head type and glazing with oil putty in squares not exc 0.5 sqm in each pane in each pane including hacking out old broken glasses complete all as specified and directed.
S&F in repair stainless steel drapery curtain rods 25mm bore and 1mm thick, including with brackets/ holders etc cut to length as required complete all as specified and directed.
S&F 9 feet pulley operated cloth drying system, aluminium anodised 22mm outer dia pipes, channel assembly, locking system to hide rope knot, ropes 4mm dia HDPE double core & fitting material etc complete all as specified and directed. Make: Easy dry or other equivalent make as approved by GE.
M&L for repair of cupboard of any type and description such as channel, hinges, magnet/ball catcher, roller etc where as required complete all as specified and directed. Note: Rate of material included in the rates quoted by the contractor.
S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or galvanised wire staples complete all as specified and directed.
Taking out existing unserviceable wooden wardrobe including chowkhat of overall size 1000mm x 1900mm approx from existing position of married & single accn including supply & fixing steel wardrobe including chowkhat of same size at the same position in Md and single accn all as directed to ensure proper & smooth functioning of wardrobe to the entire satisfaction of Engr-in-Charge. The overall outer size of chowkhat will be 1000mm X 1900 mm approx, made with 0.5mm thick plain black MS sheets and overall shutter size of wardrobe 945mm X 1845mm (approximate) having 2 shutter, 06 Nos of 75mm long, medium weight, MS butt hinges and one number approved quality chromium plated MS handle & one number MS lock of approved quality CP of Godrej pattern with key in duplicate. Thickness of all MS sheets to be used in wardrobe for any purposes including chowkhat, shutter, bracing and back etc except shelves shall be of 0.5mm thick and 02 numbers shelves of size 1.00 x 0.5m approx made of 1mm MS sheet shall be fixed suitably and properly with rivet /welds for storing clothes etc in wardrobe. 01 No MS approved pattern tie hanger shall be fixed in one shutter. One number MS peg set of three shall be fixed in other shutter of wardrobe. 18mm dia MS conduit pipe chromium plated with suitable & approved quality bracket will be fixed to both gable wall of wardrobe. Suitable pattern MS sheets bracing to shelves and shutters shall be provided to avoid any sagging and other related problem in smooth functioning and proper use of wardrobe. All cement plaster, brick wall, PCC, RCC etc disturbed during dismantling of wardrobe shall be made good in cement motar 1:3 properly as per site condition and technical requirement all as directed by Engr-in-Charge. In the bottom portion of wardrobe (of size 1.0 x 0.60m approx) 7mm thick glazed tile exc 0.06 sqm and not exc 0.11 sqm of approved colour and shade shall be laid over and including screed bed of 15mm thick in CM 1:6 including filling the joint with matching colour of tiles. In the sides (of size 0.58 x 1.88m approx each) and back portion of wardrobe (of size 1.0 x 1.88m approx) 350mmx450mmx7mm thick glazed tile of approved colour and shade shall be fixed over and including backing coat of 10mm thick in CM 1:4 including filling the joint with matching colour of tiles. Inside surface of ceiling of wardrobe (of size1.00x0.60m approx) shall be finished with two coats of OBD over a coat of birla white wall care putty after making good surface properly. Chowkhat will be fixed with suitable rawl plug with and CP steel screw inside wall etc & adjacent surfaces shall be made good to match with adjacent finishing surfaces properly as required and directed for entire completion of work. All steel surface will be painted with two coats of synthetic enamel paint with approved shade and colour by spray painting over one coat of red oxide primer including preparation of surfaces. All other misc work will also be carried out for entire completion and smooth functioning complete all as specified and directed.
S&F 150mm long stainless steel peg stays complete all as specified and directed.
NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.9,862.00]
M/s B S Jain
Devika Constructions
M/s M.G. Hargunani
Bidder Name
M/s B S Jain
Devika Constructions
M/s M.G. Hargunani
NORTH INDIA PEST CONTROL
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .