PROVN CERTAIN REPAIRS TO JOINERY, FLOORING, PLUMBING AND SANITARY FITTINGS, ROOF TREATMENT AND OTHER MISC WORKS IN ZONE - 1 (A) AREA UNDER AGE B/R - IV UNDER GE(S) JAIPUR AT JAIPUR MIL STATION

Amount

Supply and fixed in repairs CP angle cock 15mm dia fancy type cast coper alloy (Make-Jaquar Cat. No. Con-053KN), Cera or its Equivalent.

Supply and fixed in repairs CP WHB mixter cast coper alloy with central hole for WHB and long shank fancy type 15 mm bore complete all as directed.(Make-Jaquar Cat. No. Con-167KNB), Cera or its Equivalent.

Supply and fixed in repairs CP brass hot and cold 15mm dia wall mixture 3-in-1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe, connecting leg & wall flange complete all as directed.(Make-Jaquar Cat. Con-281KN), Cera or its Equivalent.

Supply and fixed in repair CP bib cock 15mm dia with crutch handle as approved fancy type long body (Make-Jaquar Con-107KN), Cera or its Equivalent. complete all as specified and directed.

Supply and fixed in repair CP bib cock 15mm dia with crutch handle as approved fancy type short body (Make-Jaquar Con-37KN), Cera or its Equivalent. complete all as specified and directed.

Supply and fixed in repair CP bib cock 15mm dia with crutch handle as approved fancy type two way Bib Cock (Make-Jaquar Con-041KN) or, Cera its Equivalent. complete all as specified and directed.

S&F in repairs CP overhead shower dia 105 mm round with revolving joints (with body rotation) & 115mm long arm shower with rabit cleaning system and all fittings Make - Jaquar OHS-1709, Cera or its Equivalent as approved.

S&F in repair Toilet paper holder Make : Jaquar Code (ACN-1153S), Cera or equivalent in MARC / PLUMBER complete all as specified and directed.

S&F in repair CP single towel rail 600 mm Make : Jaquar (AKP-35711PS) , Cera or equavalant in MRAC/PLUMBER complete all as specified and directed.

S&F in repair Soap dish Make :Jaquar Code (AQN-7731), Cera or its Equivalent complete all as specified and directed.

S&F in repair CP Jet spray Multi purpose 15 mm for bath room complete set Make Zim (Cat No. 1712) , Cera or its Equivalent

S & F in repair for CP hand shower (Health faucet) with 15 mm dia, 1.2 meter long flexible tube & wall hook with N.R.V (Back Flow Preventer) complete all as specified and directed. Make : Jaquar CAT Part No. ALD-577 , Cera or its Equivalent

S & F in repair hand shower 105 mm dia round shape multi flow with air effect (ABS Body & Face Plate Chromium Plated) with rubit cleaning system and incl Easy flex tube in chromium finish 1.5 meter long with both end nuts complete all as specified and directed. Make : Jaquar CAT Part No. HSH-1721, Cera or its Equivalent

S & F in repair Corner glass shelf (with bracket). Make : Jaquar, CAT Part No ACN-1173 , Cera or its equivalent.

S & F in repair CP towel ring round complete all as specified.. Make : Jaquar, CAT Part No AQN-7721, Cera or its Equivalent.

S&F in repair 15mm bore Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 15mm- 142 gms) Make:-Prayag

S&F in repair 20mm Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight - 210 gms), Make:-Prayag

S&F in repair PVC connection 15mm dia 45cm long with 2 Nos brass check nuts with washer complete all as specified

S&F in repair PVC connection 15mm dia 60cm long with 2 Nos brass check nuts with washer complete all as specified

S&F in repair 32mm dia PVC waste pipe flexible type for WHB 60cm long with union all as specified

S&F in repair waste fittings brass chromium plated 32mm dia for wash hand basin all as specified

S&F in repair 40mm dia PVC waste pipe for kitchen sink 60cm long with union all as specified

Taking down GI tubing 15mm dia, with connections.

Taking down GI tubing 20mm dia, with connections.

S&F tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors for 15 mm bore.

All as per item No. 25 above but 20 mm bore pipe.

M&L in repair PVC Flushing cistern 10 ltr capacity white, with inlet, ball valve, float and handle, high or low level including bracket & 32 mm dia flush pipe etc all as specfied and directed.

S&F in repairs white vitreous china wash down water closet pan (pedestal pattern) with PVC seat cover with mild steel chromium plated or aluminised hinging device including connection to drowm pipe and flushing pipe all as specified.

S&F in repairs wash hand basin vitreous china white (flat back) of size 550x400mm CI bracket 15mm dia polythene connection 32mm dia waste coupling and 32mm dia PVC waste pipe 90cm long etc. complete all as specified, including taking down the existing wash hand basin.

S&F in repairs white rimless bowl for coupled WC with UF soft close slim seat cover, Hinges, fixing accessories and accessories set,S trap, incl all neccessories items complete all as specified. Make : Jaquar, CAT Part No ONS-WHT-10201or Cera Cat Part No. S1013106 or its equivalent.

S&F in repairs counter top oval wash hand basin vitreous china white (flat back) of size 545 X 545 X 180 mmincluding all fittings complete all as specified. Make : Jaquar Cat No. CON -FSS-WHT-29601 , Cera or its Equivalent.

S&F in repairs white vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to dowm pipe and flushing pipe all as specified.

S&F in repair CP brass bottle trap 32mm dia including joining to waste fitting and waste pipe complete all as directed

S&F in repairs CP grating 125mm dia round without waste hole fixed on floor/nahani trap fixed with cement complete.

S&F in repairs CP grating 125mm dia round with waste hole fixed on floor/nahani trap fixed with cement complete.

S&F sink with drainage board made of stainless steel 1.0mm thick for kitchen with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or with 7 including fixing cantilever brackets and connecting union to pipe, overall size 1120mm x 457mm bowl size 460 x 330 x 203mm includng waste pipe of polythelene of flow or high density or PVC 32mm dia & waste fitting brass chromium plated for 32mm bore with long screwed shanks and fly nuts including making holes in stone walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0 complete including taking down of existing old sink.

Dismantling of existing water tanks exc 250 but not exc 500 ltrs capacity and disconnecting existing GI pipe connection all as directed.

Dismantling of existing water tanks exc 500 but not exc1000 ltrs capacity and disconnecting existing GI pipe connection all as directed.

S&F in rotational moulded polythene water storage tank (Cylindrical vertical with closed top ) hoisted and fixed in position 500 ltrs capacity and connecting the GI pipe and fittings all as directed ( Make : SINTEX / SHEETAL/ Polycon )

S&F in rotational moulded polythene water storage tank (Cylindrical vertical with closed top ) hoisted and fixed in position 1000 ltrs capacity including connecting the GI pipe and fittings all as directed ( Make : SINTEX / SHEETAL/ Polycon )

Cleaning and removing all scales and dirt etc from tanks and from mouths of circulating pipe etc for exc 500 n. exc 1000 ltrs capacity of tanks as directed by Engineer -in-charge.

Cleaning and removing all scales and dirt etc from tanks and from mouths of circulating pipe etc for exc 250 n. exc 500 ltrs capacity of tanks as directed by Engineer -in-charge.

Dismantling of floor /skirting ( terrazzo/ PCC / Ceramic Tiles) including cement mortar bedding (but not backing ) and removing the rubbish from the site.

M&L for Vitrified ceramic coloured tiles (of approved light shade) of size 600x 600mm, 9 to 10 mm thick in floor, set & jointed in neat cement slurry complete including screed bed 15mm thick in CM 1:6 and pointed in coloured cement to match the shade of tiles complete all as specified and as directed.

All as per item No. 44 above but on vertical surfaces such as skirting, dados and riser etc including 10mm thick rendering in CM 1:4 all as specified and directed.

M&L glazed ceramic tiles in vertical surface 350x250x7 mm / 450x350x7 mm thick set over and including 10mm thick rendering in CM 1:4 on verticle surfaces of wall and jointed in neat cement slurry and pointed in white or colour cement to match the surface of tiles complete all as specified and directed.

M&L Non skid ceramic coloured tiles 300x300x7 to 8mm thick area of each tile exceeing 0.06 sqm but n.exc 0.11sqm in floors etc set over and including 15mm thick screed bed in CM 1:6 on floor surfaces and jointed in neat cement slurry and pointed in coloured cement to match the shade of tile complete all as specified and directed.

M&L for non-skid Ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set over and including 15mm thick screed bed in cm 1:6 on floor surfaces, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

M & L for PVC moulded chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry over and including a 20 mm thick screed in CM 1:6 and pointed in coloured cement to match the shade of tiles complete all as specfied

Demolition of stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar.

M&L for granite 18 to 20mm thick as in counter slabs of WHB (of any type) work (table rubbed and polished) in cooking plate forms, counter of WHB and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

S&F in repair 20mm dia mild steel conduit with bright finish pipe of required length for curtain rods and decorative knobs at each end as specified and directed by Engr -in- Charge

S&F in repair MS chromium plated bracket holder for curtain rods 20mm dia fixed with screws to pelmet boxes all as specified and directed by Engr -in-Charge.

S & F in repair stainless steel kitchen plate rack of overall minimum size 900 x 750 x 225mm with partitions for small/ large plates etc made out of stainless steel 24 gauge, fixed with rawl plug and CP steel screws all as directed of approved quality complete all as specified and directed.

Taking down chowkats or frames (W/out taking of shutters) not exceeding 1.5 Sqm each.

Taking down chowkats or frames with shutter (W/out taking off shutters) exc 1.5 Sqm but n.exc 4 sqm each.

Taking down shutters of any description n exc 1sq. m each

Taking down shutters of any description exc 1 sq. m and n exc 2 sq. meach

S & F framed work as in doors or gates of angle or other section as chowkhat or shutters, tie bar, hold fast, guard bars, cooler stand, brackets etc and fixing complete Fe 290 (Gde-E-165)

S&F 35 mm thick IInd class Hardwood plain, framed, paneled shutters (any number of panels), with panels of 12mm veneered particle board medium density, wood particle board with commercial face veneers complete all as specified.

S&F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified.

S&F 35 mm thick 2nd class Hardwood glazed & skeleton shutters, open rebated & prepared to receive glass, gauze, etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass, etc size of members as specified in SSR Pt-I section 8 clause 8023 (a), in II nd class hard wood.

S&F for 2nd Class hard wood wrought plain fillets square, rectangular or triangular in section n exc 3 sq cm fixed nails

Material & Labour for pressed steel door frame of size 105 mm x 60 mm with one or more rebates including necessary fixing lugs, 100 mm MS hinges, lock strike plate etc complete as specified.

M & L pressed steel door frame of size 125mm x 60mm with one or more rebates including necessary fixing lugs , lock strike plate and including provision of fixed 100mm MS hinges etc complete as specified. (Note for Srl No 64.00 and 65.00: PCC fillingin the door frame will be measured and paid separately uder item No. 139.00 of BOQ)

Preparing newly steel surface or prevously untreated steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified.

Preparation of new or prevously untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel over a coat of pink primer complete all as specified.

S & F Solid PVC Door frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforce with M.S square tube, high strength suppling & fixing in opening as per specification

M&L Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing as per specification.

M&L flat iron as in hold fast and similar work.

S&F 150mm extruded aluminium alloy handles fabricated type anodised.

S&F MS butt hinges medium weight but 100mm long (ISI)

S&F 200mm extruded aluminium alloy tower bolts extruted sections anodised.

S&F 150mm extruded aluminium alloy tower bolts extruted sections anodised.

S&F 100 mm size brass handles, fabricated type polished.

S & F floor door stopper of brass body and tongue with hard drawn steel spring overall length of cover plate150mm.

S&F aluminium sliding door bolt 300mm with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed

S&F in repairs Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified.

Supply only Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified.

Hacking out old broken glass any thickness size, quality or description from wooden/ steel frames fixed with beads/ metal pinning , S&F 3mm thick sgeet glass in square not exc 0.50 Sqm in each pane fixed with wooden beads or putty ( in metal frames etc) complete all as specified

S&F 5mm thick looking mirror with and including 25mm beading all around and fixed over 6mm thick plywood on back face and fix on wall with brass screw complete all as specified. Make: Atul/ Saint Gobin/ Modiguard

S&F 20mm dia mild steel powder coated curtain rods includng side globin and end brackets including all fitting all as specified..

S&F in repair Door closer Aluminium (Diecast) body hydraulically regulateld, designation No. 1 univerasl type, suitablee for door shutters up to 700 mm in width and of weight not more than 35kg and fixed

Cutting holes for inserting hold fast and making good to the disturbed portion with cement mortor 1:3 or PCC 1:3:6 exc half brick wall n. exc one brick wall.

S&F in repair Mirror cabinet PVC/fiber of size 550 x 520 x 100 mm with sliding mirror 4mm thick of size 240 x 290 x 2 Nos with built in rack of size 230 x 150 x 90 mm with PVC plug etc with CP towel rail of length 270 mm and 100 mm dia.(Make:Supreme)

S&F in repairs sinks made of stainless steel 1mm thick kitchen with plugs, washers and wastes, including waste coupling & waste pipe, bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm, bowl size 410mm X 330mm X 160mm complete all as specified.

S&F in repair steel window handles, box type hinges and peg stay etc including welding if required all as specified

Dismantling boarding plywood etc of any description and in any position fixed with nails etc all as directed.

M&L 19mm thick MDF membrane kitchen cabinets door shutter in wood grain colour, half round edge fixed in repair

S&F Auto close hinges, stainless steel, bright finish or electrogalvanised.

S & F of kitchen basket stainless steel size 435mm x 510mm including stainless steel guide channel fixed in repair.

S & F in repair aluminium floor door stopper 140 mm size with double pin and rubber shoe fixed to bottom rail of door shutter complete

M&L for welding in repair of Box type steel windows existing damage / broken hinges, handle, frame and any other parts of n. exc. 2.5 cm in length and n. exc. 6 mm in thickness to achieve smooth function complete (Note : 1. Skilled labour (welder) and welding items like hinges, handle, peg set etc also includes in the rate 2. wire mesh will measure and paid separatly)

Repairing of existing aluminium door single leaf exc 1.00 Sqm but nexc 2.0 sqm including taking down all members , sheet glass of any thickness cleat , neosprene rubber beading and resecuring all sections & tightening all joints incl fixing new small cleats etc eac nexc 100 mm and refixing all members , sheet glass , aluminum cleat but new neosprene rubber beading (paid under seperate item ) and making the door and shutter serviceable , including fixing on Hinges complete all as specified.(Floor door springs, Neosprene rubber beading , Hinges Door Closer where renewed shall be measured and paid under seperate Item.

Ditto all as above but door/window/ventilator shutter but n exc 1.00 sqm ditto

Supply Only neosprene rubber beading suitable for aluminium door / window panels

S&F for Rubber door seal of overall size 35 mm fixed with screw on wooden or PVC Shutters

S&F in repair for 100 mm mild steel 4 lever mortice lock vertical type of size with two keys complete all as specified.

Demolition cement Concrete (unreinforced) of any description and any position not otherwise specifically provided for

M&L for providing circular,raised platform of hight 20 cm below the tank and base dia 25 cm more than the external dia of tank for pvc cylendrical tank of capicity 500/1000 liters using pcc 1:3:6 type C1 using 20 mm graded stone aggregate with smooth finish including necessary form work etc.

S&F in repair power coated anodised Aluminium alloy sections sliding windows shutters with frames comprising Series -C (20mm), 3 track sliding shutters duly fitted with neoprene beading, glazing clips,locking device, heat absorbing glass 4.8 mm nominal thicknes complete all as specified and as directed

S&F in repair Powder coated Aluminium sections ( conforming to IS) door frames with single leaf shutters complete duly fitted with neosprene rubber beading,heat absorbing glass panes 4.8 mm nominal thickness, Alu anodised with rubber shoe floor door stoppers- 1 Nos, 100mm aluminium hinges 4 Nos per shutter, Handle 2 Nos in each shutter Aluminium tower 1 Nos in each shutter and necessary locking arrangement with mortice lock with duplicate key complete all as specified and as directed

S&F in repair for Aluminium Anodised door frame with shutter, incl necessary joining cleats, glazing clips rubber neoprene packing ,heat absorbing glass panes 4.8 mm nominal thickness, Alu anodised with rubber shoe floor door stoppers- 2 Nos Handle 2 Nos in each door, 4 Nos 100mm hinges, 1 Nos 200mm aluminium anodised tower bolt anodised aluminium snap beading screw ecessary locking arrangement with mortice lock with duplicate key complete all as specified

S&F in repair 4.8mm thick glass of colour/ tinted pattern in square as required & directed by Engr -in- Charge

S & F 75mm size hasp and staple, safety type, aluminium anodised and fixed with screws

S & F factory made steel ventilator with top hung shutter including hinges, steel peg stay and handle complete all as specified

S & F factory made steel window with side hung shutters factory made including box type hinges with steel handle and steel peg stay complete with glazing bars devetailed or welded incl inserting the hold fast in stone masonry and make good the disturbed masonary

S & F factory made steel window with side hung shutters including box type hinges with steel handle and steel peg stay complete without glazing bars all as specified

S & F 3 mm thick froasted glass and glazing with oil putty in sqaures not exc 0.5 sqm in each pane.

S & F 3 mm thick plain sheet glass ordinary quality and glazing with oil putty in sqaures not exc 0.5 sqm in each pane.

S & F in repairs Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors, 75mm bore sand cast pipe

S & F in repairs Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, fix to wall, 75mm bore sand cast pipe

S & F in repair Cast Iron soil cowl 100 mm dia

S & F in repair Cast Iron bends (any radius) 100 mm dia with oval access doors

S & F in repair Cast Iron bends (any radius) 75 mm dia with oval access doors

S & F in repair 100mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete

S & F in repair Stack clamps out of 25mm by 3mm flat iron and 8mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof for 100/110 mm bore pipe

Dismantling of 100/75 mm dia PVC Pipe drain pipes, jointed in cement mortar and taking out of trenches, if required

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls for rain water etc complete.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.

S&F PVC (SWR) bends any radius 110mm bore dia.

S&F 110mm bore PVC (SWR) branch piece, single (single y) equal or un equal.

Supply and fixed in repairs plastic water closet seat black/white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete as approved

S & F in repair PVC water tank lid suitable for 500 ltr to 1000 ltrs capacity OHT complete all as specified.

Demolition of PCC in roof covering, kerbs, roof kerbs, benching, coved fillets etc including old decayed water proofing treatment of any type all as directed by Engineer-in-charge.

M&L for surface preparation by complete removal of all loose particle to ensure clean, smooth and dry surface and laying 25mm thick PCC type B-0, (1:2:4) using 12.5mm graded stone aggregate finished even & smooth without using extra cement to cover negative slope into prop with WPC @ 3% weight of cement.

M & L fibre reinforced, UV resistant elastomeric liquid applied water proofing & Heat reflective coating coating with acrylic Polymers and polyesterfibres, Smart Care Damp Proof or approved equivalent.The coating shall resist 7 bars of water pressure as per DIN 1048 standards, with elongation of 220% as per ASTM D412 & crack bridging of upto 1 mm & with high SRI value conforming to ASNZ standard. And applying three coat of Elastomeric waterproofing coating with recron fibres & High SRI value (Damp Proof) but fisrt coat of should be as primer for terrace waterproofing. Damp Proof is a part of the DSR as per 22.22A and incl repair and preparing of surfacesre. The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge. (Note: UV resistant elastomeric liquid applied water proofing treatment shall be carried out by authorised applicator of make: (i) Asian Paint, Smart Care and damp proof (ii) M/s Sikka India Pvt. Ltd. (iii) M/s STP India Pvt Ltd. (iv) Bostick India Pvt Ltd. and approved by Accepting Officer.

Demolition PCC in ground floors above and pavings n exc 15 CM thickness (below above ground level) complete all as specified.

M&L for 100 mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base for floor complete all as specified and directed by Engineer-in-charge.

M&L providing pre cast cement concrete block or slab 150mm thick 1:2:4 type B1 using 20mm graded stone aggregate with plain or inter locking joints as directed set in CM 1:6. kerbing/edge block to hard standing/footh including necessary earth work.

M&L for pvc moulded coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm tickness , M-35 grade, set, jointed over 25 mm thick sand cushoning all as directed by Engineer-in-Charge.

S & F in repair floor mounted spring for aluminium door ISI marked as per sample and approved by GE including taking down existing aluminium glazed door shutter n. exc. 2 sqm each and refixing the shutter in same opening/position ( after replacing the floor spring).

Taking down cement plaster of any discription.

M&L 15 mm thick plaster in CM 1:6 on any surfaces or concrete surfaces finished even and fair without using extra cement.

M&L for preparation of new plastered surfaces of walls & applying two coats of cement base paint over a coat of primer.

M&L for preparation of new plastered surfaces of walls & applying two coats of oilbound distemper over a coat of primer.

M&L for complete removal of existing treatment on wall and applying two coats of oil bound distemper over a coat primer.

M&L PCC 1:3:6 type C0 for filling in Pressed Steel door frame catered at Ser No. 64 & 64 of BOQ.

MSR INFRATECH

UNIVERSAL INFRAPROJECT PVT LTD

M/s Bhavesh Construction Company

M/S Mohan Lal Gupta