CERTAIN REPAIR TO SANITARY FITTINGS, RENDERING, CEILING AND ROOF OF CORPS CAMP, BSO YARD AND HQ CE 31 ZONE AT BB CANTT, SRINAGAR

Amount

Dismantling of plain or corrugated steel sheeting, any gauge thickness, including nanital or similar pattern roof covering complete all as specified and directed.

M&L 0.63 mm galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with 'L' type or 'J' type or cranked hook bolt, in roof, wall etc with grade of zinc coating 275 complete all as specified and directed.

All as per srl item No. 2 here-in-above but except sheets.

M&L 0.80 mm thick plain galvanised, mild steel sheeting as in ridges, hip, valley gutter, drip and straight flashing( length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

S&F 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed.

S&F 0.5 mm thick Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self-tapping screws complete all as specified and directed.

S&F 0.5 mm thick Pre-painted galvalume aluminium zinc coating GI based plain steel sheet of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self-tapping screws complete all as specified and directed.

Dismantling of timber scantlings 40 sq. cm and over in section, in any position unframed work complete all as specified and directed.

M&L second class soft-wood clean sawn as in scantling complete all as specified and directed.

All as per srl item No. 9 here-in-above but except timber.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

M&L 6mm thick plywood grade BWR type BB fixed with screws/ nails to timber frame work for wall panelling and wall/ ceiling complete all as specified and directed.

M&L Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as in wall and ceiling complete all as specified and directed.

M&L 5 mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing to wall to make PVC frame complete all as specified and directed.

M&L Khatamband ceiling of pattern as approved by GE including necessary frame work complete all as specified and directed.

M&L Gypsum board tile ceiling of size 600mm x 600 mm x 12 mm thick fixed to ceiling with and including anodised aluminium snap grid framework, of size 605mm x 605mm, for false ceiling fixed to surrounding wall with rawl plug and screw and with hanger 4mm dia GI (up to 1200 mm length) adjusting level fixed to roof trusses by means of ceiling cleats made out of GI flat 40x3 mm size 60 mm long and expansion hold fastners 12.5 mm dia 40 mm long screw as per manufacturers instruction complete all as specified and directed.

M&L 18/19mm thick pre-laminated particle board interior grade, pre-laminated one side, with decorative choice lamination and other side balancing white lamination, fixed with screws to timber framework complete all as specified and directed.

S&F 12 mm thick 2nd class softwood clean sawn boards or planks, width n exc. 25 cm as in eaves board/wall boarding complete all as specified and directed.

M&L Wooden laminated flooring of size 1200x200x6to 8mm thick with adhesive and base as specified by manufacturers instructions, fixed in repair complete all as specified and directed. (As per sample approved by GE) (Make Action tesa, Pergo or equivalent as approved by GE)

Taking down cement plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15 mm thick rendering on fair faces of brick/ concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick/ concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and directed.

M&L for 5 mm thick rendering on fair faces of concrete surfaces as in ceiling in cement mortar 1:3 and finished even and smooth without using extra cement complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar (but not backing including taking rubbish off the premises) complete all as specified and directed.

M&L 15mm thick screed bed or bedding/backing coat in cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M&L 10 mm thick plaster with CM 1:3 on fair faces of brick work or concrete surface as in wall for wall tile complete all as specified and directed.

M&L Non skid ceramic colour tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed.

M&L vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in(light shade) floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed.

M&L vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.42 sqm in (Dark shade/ double charged) floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed.

M&L for (450x300) x 6 to 7 mm thick coloured glazed ceramic tiles as in skirting/dado set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete all as specified and directed.

M&L for (200x300) x 6 to 7 mm thick coloured glazed ceramic tiles as in skirting/dado set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete all as specified and directed.

Demolition of Reinforced cement concrete (Reinforcement cut as required to facilitate) of any description and in any position not otherwise specifically provide for complete all as specified and directed.

Use and waste of form work to soffits of suspended slab such as roof slab, floor slabs, landings, chajjas and similar work not exceeding 200 mm thick horizontal or sloping, flat rough finished surface of concrete complete all as specified and directed.

S&F TMT bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with Mild Steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid in any mortar complete all as specified and directed.

Machine cut kota stone slab flooring 18-20mm thick over cement screed base in CM 1.4, 15mm thick, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Machine cut kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid over screed in CM 1:4, 15mm thick and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

18-20mm thick Granite (of any type) tiles machine cut in skirting/ dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing of type complete all as specified and directed.

Demolition of concrete in ground floor & pavings n exc 15 cm thick below or above ground level complete all as specified and directed.

M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in floor and finished even and smooth with using extra cement complete all as specified and directed.

M&L for providing 50 mm thick cement concrete 1:3:6 type C-2 using 20mm graded crushed stone aggregates as in plinth protection finished even and smooth with using extra cement complete all as specified and directed.

M&L 50 mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregates) as in floor complete all as specified and directed.

M&L 75 mm thick cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) as in floor finished even and smooth complete all as specified and directed.

M&L Glazed coloured Chequered cement concrete tiles 25 cm x 25 cm x 22 mm thick, set, jointed and pointed in neat cement slurry (with grey cement and pigment) as in floors over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for PCC 1:4:8 typeD2 (40 mm graded crushed stone aggregate) as in sub base of flooring, filling and mass concrete including finished surface even and fair complete all as specified and directed.

Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

Machine pressed precast concrete with grey cement and pigment interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment, set and jointed with sand cushioning (Sand cushioning will be paid separately) complete all as specified and directed.

Providing precast cement concrete 1:2:4, type B-1 using 20mm graded crushed stone aggregates as in copings, kneelers, apex stones, pier caps, bed plates, pintle blocks, anchorage blocks, corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weathering, throating etc. and setting in mortar 1:4 complete with joints to match the surface complete all as specified and directed.

Demolition of brick work or stone masonry built in cement mortar including all quoins arches, pillar etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and directed.

M/L brick work with sub class 'B' bricks straight or curved on plan built in CM 1:6 complete all as specified and directed.

All as per srl item No. 50 here-in-above but except brick complete all as specified and directed.

M&L walling of random rubble stone masonry uncoursed well bonded, bedded and solidly hearted built in CM 1:6 complete all as specified and directed.

All as per srl item No. 52 here-in-above but except stone received from retrieved material.

Taking down Shutters of any description exc 1 sqm and n.exc 2 sqm (each leaf) complete all as specified and directed.

Taking down chowkat or frames with shutters (without taking off shutters from the frames) n.exc 1.5 Sqm each complete all as specified and directed.

S&F 35 mm thick 2nd class soft wood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 35 mm thick 2nd class soft wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I and fitted to chowkats complete all as specified and directed.

S&F 30 mm thick 2nd class soft wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters, window, ventilator as specified in SSR Part-I and fitted to chowkats complete all as specified and directed.

S&F factory made solid PVC profiled panel door shutter 28mm thick with integral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as infill with C type GI or 40x20x19 of MS pipe as stiffener & fixing in frame at site complete all as specified and directed.

Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stile and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube in opening as per specification and drawings complete all as specified and directed.

Hacking out old broken glass (any thickness size quality or description) from metal frame including punching or drilling out old glazing pins/ spring clips and providing and fixing new ones complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts 150mm size of extruded section complete all as specified and directed.

S&F Butt hinges 125mm size medium weight cold rolled complete all as specified and directed.

S&F Butt hinges 75mm size medium weight cold rolled complete all as specified and directed.

S&F aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) & fixing clips of sheet, cost or extruded sections & fixing bolts & sliding bolts in extruded sections or cast aluminium alloy of size 200mm complete all as specified and directed.

S&F extruded aluminium alloy handles 150mm size fabricated type anodised complete all as specified and directed.

Taking up or down steel tubing 15mm dia and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

All as per srl item No. 71 here-in-above but 20 mm bore pipe.

S&F Steel water tubing 15mm bore medium grade galvanised with all fitting and fixed to wall and ceiling or laid in floors complete all as specified and directed.

All as per srl item No. 73 here-in-above but 20 mm bore pipe complete.

Fixing only steel water tubing medium grade galvanised with all fittings and fixed to wall and ceiling or laid in floors of 15mm bore complete all as specified and directed.

All as per srl item No. 75 here-in-above but 20 mm bore pipe.

S&F in repair stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe 20mm dia complete all as specified and directed.

S&F in repair pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe of dia 15 mm complete all as specified and directed.

S&F in repairs CP fancy type mixture tap of standard quality for mixing hot & cold water as approved by Engr-in-Charge with centre hole mixer with fittings complete all as specified and directed.

S&F Plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, fixed in repair complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repair angle valve fancy type chromium plated with wall flange cast copper alloy screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15mm bore complete all as specified and directed.

S&F in repairs 32 mm dia PVC waste pipe for WHB complete all as specified and directed.

S&F in repairs 32 mm dia PVC waste pipe for Urinal complete all as specified and directed.

S&F in repairs 40 mm dia PVC waste pipe for sink complete all as specified and directed.

S&F in repair waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms) complete all as specified and directed.

Dismantling water tanks and removing to store exc 250 but n exc 500 complete all as specified and directed.

Dismantling water tanks and removing to store exc 500 & n.exc 1000 complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, capacity of water tank 1000 Ltr complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, capacity of water tank 500 Ltr complete all as specified and directed.

S&F in repairs mild steel conduit pipe bright finished 20mm dia as in curtain rod for pelmet box complete all as specified and directed.

S&F in repair door closer hydraulically regulated (Aluminium cast type body), designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and directed.

S&F in repairs MS helical door spring 150mm size including roller and roller plate fixed to wooden or steel frames with welding etc complete all as specified and directed.

S&F in repairs 18/19 mm thick block boards, grade-2 quality, interior grade, commercial type, fixed with screws as in shelves and shutters of cup board etc complete all as specified and directed.

S&F in repairs plywood grade BWR type BB, 12 mm thick fixed to timber frame work with nails etc complete all as specified and directed.

S&F in repairs plywood grade BWR type BB, 9 mm thick fixed to timber frame work with nails etc complete all as specified and directed.

S&F in repair floor door stopper of 140mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F 300 mm, mild steel ordinary rat tail, rod pattern springs including roller and roller plate complete all as specified and directed.

S&F in repairs continuous piano hinges mild steel, bright finish or electro galvanised with width of flap 30 mm when open complete all as specified and directed.

S&F in repairs double action springs hinges of size 100 mm, mild steel with steel wire spring, stove enamelled black complete all as specified and directed.

M&L for 2nd class hard wood small fittings such as shaped door & window stops, cleat and like, including all necessary labours, articles not exceeding 200 cubic centimetre each complete all as specified and directed.

S&F in repairs stainless steel sink with drainage board made of stainless steel 1.00 mm thick with rawl plug washers and waste pipe including bedding in cement mortar to dwarf wall or including fixing M S cantilever brackets of size 25mm x 25mm x 4mm thick and connecting union to pipe, overall size of 915 mm x 460mm bowl size 410mx330mmx160mm complete all as specified and directed.

S&F in repair Vitreous China urinals, bowl type (back to corner wall type), complete including providing and fixing plus, bedding urinal against wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.

S&F in repair Vitreous China wash basin, white, flat back, size 580x450mm excluding taps, waste chain and plug and porcelain stopper but including brackets complete all as specified and directed.

Lagging to pipes internal dia 15mm used in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144Kg/cum confirming to IS9842 complete all as specified and directed.

All as per srl item No. 105 here-in-above but internal dia 20mm.

Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed.

S&F Cast iron soil, waste and vent pipes,100mm dia in any length with or without ears with cement joints, laid in trenches or in floors/walls complete all as specified and directed.

S&F Cast iron soil, waste and vent pipes,75mm dia in any length with or without ears with cement joints, laid in trenches or in floors/walls complete all as specified and directed.

All as per srl item No. 109 here-in-above but on wall complete all as specified and directed

S&F Cast iron soil, waste and vent pipes,50 mm dia in any length with or without ears with cement joints, laid in trenches or in floors/walls complete all as specified and directed.

S&F 100mm cast iron sanitary connections-short connections pipe of length upto 300mm complete all as specified and directed.

S&F C- I oval access door fixed to 100mm bore pipe complete all as specified and directed.

S&F cast iron oval access door fixed to 75mm bore pipe complete all as specified and directed.

S&F cast iron floor trap with grating to 75mm bore including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 complete all as specified and directed.

S&F bends (any radius) 100mm bore diminishing pieces or tapers complete all as specified and directed.

S&F stack clamp out of 50mm by 5mm flat iron and 16mm dia round iron stays including bolts and nuts and screwing ends of stay to wall or roof of 110mm bore pipe complete all as specified and directed.

M&L preparation of new surfaces and applying two coats of OBD on new surfaces on wall with 2 coat of wall putty complete all as specified and directed.

M&L preparation of old surfaces including complete removal of existing treatment of wall and applying two coats of OBD on new surfaces on wall complete all as specified and directed.

M&L for preparation of new plastered surface on wall and applying two coats of cement base paint over one coat of cement primer complete all as specified and directed.

M&L for preparation of old plastred surface on wall including complete removal of existing treatment and applying two coats of cement base paint over one coat of cement primer complete all as specified and directed.

Preparing old surfaces (plastered or unplstered) on ceiling and applying two coat of white wash complete all as specified and directed.

M&L for preparation of old plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

Applying two coats Apex (ultima) paint over a coat of primer on new plastered surfaces of wall including preparation of surfaces with 3mm thick wall care putty complete all as specified and directed.

Applying two coats Apex (ultima) paint over a coat of primer on old plastered or unplastered wall surfaces including preparation surfaces complete all as specified and directed.

Preparation new wooden surfaces and applying two coat of synthetic enamel paint over one coat of pink primer surface of any description not other wise described over 10 cm width or girth complete all as specified and directed.

Preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Preparation new steel surfaces and applying two coats of synthetic enamel paint over one coat of red oxide surface of any description not otherwise described over 10 cm width or girth complete all as specified and directed.

Preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M/S NORTHERN ELECTRICAL WORKS

M/S ESS EMM ENTERPRISES

M/S Vivek Gupta and Co

M/S Paradise Constructions