8790/E8

Amount

SCHEDULE 'A' PART-I (B/R WORKS) M&L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. and brushing neat cement slurry with 2.75 kg of cement per sq. metre complete all as specified and directed.

S&F Vitrified coloured (light shade) Ceramic tiles, 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including screed bed 15mm thick in cement mortar 1:4 complete all as specified and directed.

-ditto- but vitrified tiles in skirting over 10 mm thick backing coat in cement mortar 1:4

M&L for 18-20mm thick Granite Slab (of any type)(table rubbed and polished) as in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including screed bed 10 mm thick in cement mortar 1:4 all as specified and as directed.

Demolition of Brick Work built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any descriptions, complete all as specified and as directed.

Demolition of Cement Concrete (un-reinforced) in Ground Floors and Pavings not exc. 150mm thickness (above or below Ground Level), complete all as specified and as directed.

M&L for excavating over areas not exceeding 1.5 metre deep and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches n exc 1.50 m wide and n exc 1.50m depth for foundation etc or for shafts, wells, cess pits, manholes, pier holes etc not exc 10 Sqm on plan and not exc. 1.50 Metre in depth and getting out as in soft/loose Soil, complete all as Specified and as directed.

Returning filling in incl spreading , levelling , watering and well ramming in layers not exc 25 cm as in soft/ loose Soil, complete all as Specified and as directed.

Removing excavated materials to a distance not exc 50 m and depositing where directed at a level not exc 1.50 m above the starting point complete all as Specified and as directed.

M&L for Hardcore with broken stones, of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for plain cement concrete 1:3:6 type C2, using 40 mm graded crushed stone aggregates as in filling and mass concrete complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B1, using 20 mm graded crushed stone aggregates as in filling and mass concrete complete all as specified and directed.

M&L Brick Work with fly-ash Bricks (with Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.

M&L Brick Work with fly-ash Bricks Half-Brick thick, Old Size, built in Cement Mortar 1:4, Straight or Curved on Plan to any Radius, complete all as specified and as directed.

M&L Rendering 10mm thick, on fair faces of brick or concrete surfaces of walls in cement mortar 1:4, finished even and fair complete all as specified and directed.

M&L Rendering 15mm thick, on fair faces of brick or concrete surfaces of walls in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and directed.

M&L Rendering 15mm thick, on fair faces of brick or concrete surfaces of walls in cement mortar 1:4, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rolled mild steel sections, Fe 410-W(Gde-E- 250) quality-A, as in Stairs (framed) including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, etc. complete all as specified and directed.

M&L for mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc.complete all as specified and directed.

-ditto- but for ornamental work

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description over 10cm width or girth including cleaning and preparation of surfaces complete all as specified and directed.

M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

M&L mild steel work in tubular trusses including special shaped washers etc complete using ERW or induction butt welded tubes conforming to IS-1161:2014 grade St-240 complete all as specified and directed. (NOTE: Quoted rates shall be deemed to include for cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing complete)

M&L applying two coats of exterior acrylic emulsion weather proof paint over a coat of alkali resistant primer to new wall surfaces of any description, over 10cm width or girth not otherwise described, as per manufacturer's instructions, upto 4 storey height complete all as specified and as directed.

-ditto- as per Item No. 25 above but for bldg height from 5 to 8 storey height

-ditto- as per Item No. 25 but for bldg height from 9 to 12 storey height

M&L Preparation of new plastered surfaces of walls and applying two coat of acrylic distemper (1st quality) over a coat of alkali resistant primer complete all as specified and directed.

M&L for applying one coat of acrylic distemper to old decorated surfaces of walls including preparation of surfaces by washing, rubbing down and stopping of distempered and painted surfaces complete all as specified and as directed.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished surfaces complete all as specified and directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc for rough finished surfaces complete all as specified and directed.

M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces complete all as specified and directed.

M&L RCC 1:1½:3, type A1, using 20 mm graded stone aggregate, as in Columns, pillars, piers, posts and struts complete all as specified and directed. (NOTE: MS reinforcement shall be measured and paid seperately)

M&L RCC 1:1½:3, type A1, using 20 mm graded stone aggregate, as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. (NOTE: MS reinforcement shall be measured and paid seperately)

M&L RCC 1:1½:3, type A1, using 20 mm graded stone aggregate, as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. (NOTE: MS reinforcement shall be measured and paid seperately)

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for TMT bars 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders cut to length, bent to shape required as in reinforcement and binding with MS wire ( annealed ) not less than 0.90 mm dia complete all as specified and directed .

M&L for roof tiles, Mangalore pattern, interlocking at side joints, laid dry etc complete all as speified and directed .

M&L for Ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in lime mortar 1:3 or cement mortar 1:6 complete all as specified and directed.

S&F 12mm thick, toughened glass, fixed with EPDM rubber gasket as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and directed

S&F powder coated of approved colour (minimum thickness of powder coating 50 micron) anodised aluminium doors frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F 0.50 mm thick TCT (total coated thickness) pre-coloured galvalume sheets with minimum base metal thickness of 0.45 mm, single skin high rib/multi rib profile galvalume sheeting having 1000-1020 mm width and 28-30 mm high crest @ maximum 250-255 mm pitch (centre) with sheets manufactured out of 0.50 mm this TCT (total coated thickness) high tensile galvalume sheets having tensile strength 550 MPA with 18-20 micron top coat over 5 micron primer and 8-10 micron alkyld backer zinc aluminium alloy AZ-150, sheets having a dip metallic zinc (43.5%0 aluminium (55%) & silicon (1.5%) with total mass coating of 150 gms/sqm on both sides, having wide pans with minimum 3 small stiffening ribs for effective water shedding and special male/female ends with full return legs on laps for purlin support and fixed as per existing profile of roof complete all as specified and directed.

All as per Item No. 42 above but 0.50 mm thick coloured plain galvalume sheet as in ridge/valley gutter of roof.

M&L for Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed.

S&F 12mm thick gypsum board false ceiling including Gl frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm, fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, fixed to soffit of ceiling with GI cleat and expansion fastern with and including necessary nuts and bolts and gypsum board is screwed to ceiling section with stainless steel screws @ 230mm c/c including applying two coats of plastic emulsion paint over a coat of primer to exposed surfaces complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as directed.

Taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as directed.

M&L for neeru finish to plastering with 1.5 mm lime putty, well finished with trowel complete all as specified and directed.

Cleaning of existing covered/uncovered (partly / semi or fully filled up) drain, of opening width 450 mm and 400 mm depth by removing and re-fixing of cover-slab (wherever applicable) taking out accumulated silt, mud, earth, rubbish, vegetation etc from the drain and removing the same at a distance exceeding 500 metre but not exceeding 1 Kilometre where directed, washing of the drain with water complete all as directed by the Engineer-in-Charge.

M&L for plain cement concrete (1:2:4) type B1 using 20 mm graded aggregates in roof kerbs or mud stops, rounded or chamfered on edges including formwork complete all as specified and directed.

Supply and laying 600 mm bore reinforced concrete pipe of Class NP-3, laid and jointed with jute & cement mortar 1:2, complete with collars all specified and as directed.

M&L concrete bed to drain pipe including packing under and haunching against the side of drain pipe after laid and tested in PCC 1:3:6 type C2 for 600 mm bore pipes complete all as specified and directed.

M&L for walling of random rubble, uncoursed, well bonded, beded and solidly hearted, built in cement mortar 1:4 complete all as specified and directed.

M&L for cutting into old masonry to form toothings for and bonding in new brick or stone work including making good in cement mortar 1:4 complete all as specified and directed.

M&L Glazed Ceramic coloured tiles of size 300x200x7mm thick in floors, set and jointed with neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

-ditto- as per item No. 55 above but on vertical surfaces fixed over and including 10 mm thick screed bed in cement mortar 1:4

M&L for 75mm thick PCC (1:3:6) type 'C-2' (using 40mm graded crushed stone aggregate) as in sub base of concrete finished even and fair cement complete all as directed..

M&L for pre-polished Chequred cement concrete tiles (coloured) of size 30cmx30cmx25mm thick , set , jointed and pointed in neat cement slurry in floor and pointed with white/coloured cement &pigment to match the surface laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed .

SCHEDULE 'A' PART-II (WATER SUPPLY WORKS) Supply, installation and testing 3 phase open well submersible pump set 5.0 HP capacity, electric driven, 415 volts, head range 28 to 40 metres with flow rate 468 to 240 LPM, suction X delivery 65x50 mm complete all as specified and directed. (MAKE: KIRLOSKAR, Model : KOS-538+ or equivalent model in CROMPTON GREAVES / KSB)

Supply, installation and testing 3 phase open well submersible pump set 3.0 HP capacity, electric driven, 415 volts, head range 18 to 36 metres with flow rate 282 to 126 LPM, suction X delivery 50x40 mm complete all as specified and directed. (MAKE: KIRLOSKAR, Model : KOS-335+ or equivalent model in CROMPTON GREAVES / KSB)

S&F PVC insulated flat industrial copper cable, of cross-sectional area 4.0 sq mm x 3 core multi stranded suitable for submersible pump complete all as specified and as directed.

S&F fountain floor nozzle (3 step) with 19 Nos adjustable nozzles (4 mm hole) brass chrome plated with ABS parts of size 25 mm complete all as specified and directed.

S&F tubes 50mm bore "medium grade" galvanised with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

All as per item No. 63 here-in-before but 25 mm bore

S&F in repair Gun metal gate valve, 50 mm bore, as per IS : 778-84 Class-1 Pressure tested 2.4 Mpa with iron wheel head, screwed both ends for iron pipes or for unions complete as all specified and as directed.

-diito- as per Item No. 65 above but 25 mm bore valve

S&F LED RGB colour fountain light, in die cast aluminium, silver coloured body, 6X3 Watt, IP 68 grade protection, of cutout size 100mm dia and 120mm height, total lumen output 960 lumen with beam angle 5-45 degree incl all accessories such as constant current driver, lens, glass, gland, clamp etc complete all as specified and as directed by Engr in Charge.

S&F LED light colour changing control box, to achieve six colour sequence operations, of capacity 230 Volts, 10 Amps suitable for 6X3 watt LED light complete all as specified and as directed by Engr in Charge.

S&F LED Flood Light fitting, 50 watt, in high pressure die cast aluminium housing with prismatic polycarbonate modular secondary lens optics with integrated constant current electronic driver and toughened glass cover, IP66 grade ingress protection, impact resistance IK07 complete all as specified and directed and complying with the following specifications:-. (a) minimum system efficacy 120 lumen/watt (b) CRI not less than 70, (c) THD < 10% (d) Power factor not less than 0.90 (e) having in built short circuit & surge protection upto 4 kV (f) having 10 KV external surge protection (g) colour temperature not less than 5700° K (h) life not less than 50000 hours of operation NOTES :- (1) List of approved makes has been provided in particular specifications. Contractor shall ensure that luminaire provided comply with the aforesaid specifications. No claim shall be entertained during currency of work.. (2) Wire for electric connection shall be measured and paid separately)

S&F PVC insulated multistranded copper conductor wire, 2.5 sqmm 3 core, round flexible for connection of light fittings complete all as specified and as directed.

Supply, install, commissioning and testing of outdoor type LT panel board, cubical type, dust and vermin proof, made out of 3.15 mm thick CRCA sheet of size 1200 mm x 900 mm x 500 mm, fabricated in CPRI approved factory with front and back openable door (with locking arrangement) and making compartment for each ACB/MCCB/change over switch separately, duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer inclusive of four numbers aluminium bus bar of 100 Amps capacity (of adequate length), for three phase and neutral system, fixed over and including 4 nos insulators, pre-wired with PVC insulated stranded copper conductor (of adequate size), all incoming / outgoing connection to be made with copper lugs and copper strips, with provision of cable entry and exit at mid portion of the panel board (with cable gland),and two numbers Danger Notice Plate (of size 20 cm x 15 cm, suitable for LT line, made out of 0.6 mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour, fixed with angle iron with base 40x40x6mm with legs not more than 60cm including grouting with PCC 1:2:4 type B1 complete all as directed by the Engr-in-Charge including supply and fixing of the following accessories :-

(i) MCCB, 4 pole, 16 kA, thermal magnetic release, 63 Amps, Ics=100% of Icu, 415 Volts AC - 01 No (Make: L&T, Cat No: CM90518OOHO / C&S, Cat No: CSESL125FMU4P-63A / LEGRAND, Cat No: 4200 13 / ABB, Cat No: 1SDA066816R1 / SCHNEIDER, Cat No: LV426165) (ii) MCCB, 4 pole, 16 kA, thermal magnetic release, 40 Amps, Ics=100% of Icu, 415 Volts AC - 02 No. (Make: L&T, Cat No: CM90518OOFO / SCHNEIDER, Cat No: LV426163 / LEGRAND, Cat No: 4200 12 / C&S, Cat No: CSESL125FMU4P-40A / ABB, Cat No: 1SDA066814R1) (iii) 3 phase DOL submersible pump starter in sheet metal enclosure with single phase preventor, for 5 HP pump, 415 Volt, relay range 6-10 Amps - 01 No (Make : L&T, Cat No: SS95983DOVO or equivalent model in other makes specified in tender) (iv) 3 phase DOL submersible pump starter in sheet metal enclosure with single phase preventor, for 3 HP pump, 415 Volt, relay range 4-6.5 Amps - 01 No (Make : L&T, Cat No: SS95983DOTO or equivalent model in other makes specified in tender) CONTD....

ARJUN DAS VALECHA

DEEPAK KHATTAR

DEB AND COMPANY

PRABIR TRADERS

S.K. TRADERS

UNIVERSAL TRADING CENTRE

GHOSH ENTERPRISE

BASU AND CO

JOY-EN-JOY